Reference record for OID 1.3.6.1.4.1.4491.2.1.21.1.1.1.20



parent
1.3.6.1.4.1.4491.2.1.21.1.1.1 (docsQos3PktClassEntry)
node code
20
node name
docsQos3PktClassEnetProtocol
dot oid
1.3.6.1.4.1.4491.2.1.21.1.1.1.20
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3PktClassTable(1) docsQos3PktClassEntry(1) docsQos3PktClassEnetProtocol(20)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3PktClassTable(1) docsQos3PktClassEntry(1) docsQos3PktClassEnetProtocol(20)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3PktClassTable(1) docsQos3PktClassEntry(1) docsQos3PktClassEnetProtocol(20)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3PktClassTable(1) docsQos3PktClassEntry(1) docsQos3PktClassEnetProtocol(20)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3PktClassTable(1) docsQos3PktClassEntry(1) docsQos3PktClassEnetProtocol(20)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3PktClassTable(1) docsQos3PktClassEntry(1) docsQos3PktClassEnetProtocol(20)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3PktClassTable/docsQos3PktClassEntry/docsQos3PktClassEnetProtocol
  • /iso/identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3PktClassTable/docsQos3PktClassEntry/docsQos3PktClassEnetProtocol
  • /iso/org/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3PktClassTable/docsQos3PktClassEntry/docsQos3PktClassEnetProtocol
  • /iso/org/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3PktClassTable/docsQos3PktClassEntry/docsQos3PktClassEnetProtocol
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3PktClassTable/docsQos3PktClassEntry/docsQos3PktClassEnetProtocol
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3PktClassTable/docsQos3PktClassEntry/docsQos3PktClassEnetProtocol
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/4491/2/1/21/1/1/1/20

    Description by circitor

    If EnetProtocolType is 'none', this attribute is
    ignored when considering whether a packet matches the
    current rule.
    If EnetProtocolType is 'ethertype', this attribute
    gives the 16-bit value of the EtherType that the packet
    must match in order to match the rule.
    If EnetProtocolType is 'dsap', the lower 8 bits of this
    attribute's value must match the DSAP byte of the packet
    in order to match the rule.
    If EnetProtocolType is 'mac', the lower 8 bits of this
    attribute's value represent a
    lower bound (inclusive) of MAC management message type
    codes matched, and the upper 8 bits represent the
    upper bound (inclusive) of matched MAC message type
    codes. Certain message type codes are excluded from
    matching, as specified in the reference.
    If the Ethernet frame contains an 802.1P/Q Tag header
    (i.e., EtherType 0x8100), this attribute applies
    to the embedded EtherType field within the 802.1P/Q
    header.
    If the referenced parameter is not present in the classifier,
    the value of this attribute is reported as 0.

    Parsed from file DOCS-QOS3-MIB.mib
    Module: DOCS-QOS3-MIB

    Description by cisco_v1

    If EnetProtocolType is 'none', this attribute is
    ignored when considering whether a packet matches the
    current rule.
    If EnetProtocolType is 'ethertype', this attribute
    gives the 16-bit value of the EtherType that the packet
    must match in order to match the rule.
    If EnetProtocolType is 'dsap', the lower 8 bits of this
    attribute's value must match the DSAP byte of the packet
    in order to match the rule.
    If EnetProtocolType is 'mac', the lower 8 bits of this
    attribute's value represent a
    lower bound (inclusive) of MAC management message type
    codes matched, and the upper 8 bits represent the
    upper bound (inclusive) of matched MAC message type
    codes. Certain message type codes are excluded from
    matching, as specified in the reference.
    If the Ethernet frame contains an 802.1P/Q Tag header
    (i.e., EtherType 0x8100), this attribute applies
    to the embedded EtherType field within the 802.1P/Q
    header.
    If the referenced parameter is not present in the classifier,
    the value of this attribute is reported as 0.

    Description by mibdepot

    If EnetProtocolType is 'none', this attribute is
    ignored when considering whether a packet matches the
    current rule.
    If EnetProtocolType is 'ethertype', this attribute
    gives the 16-bit value of the EtherType that the packet
    must match in order to match the rule.
    If EnetProtocolType is 'dsap', the lower 8 bits of this
    attribute's value must match the DSAP byte of the packet
    in order to match the rule.
    If EnetProtocolType is 'mac', the lower 8 bits of this
    attribute's value represent a
    lower bound (inclusive) of MAC management message type
    codes matched, and the upper 8 bits represent the
    upper bound (inclusive) of matched MAC message type
    codes. Certain message type codes are excluded from
    matching, as specified in the reference.
    If the Ethernet frame contains an 802.1P/Q Tag header
    (i.e., EtherType 0x8100), this attribute applies
    to the embedded EtherType field within the 802.1P/Q
    header.
    If the referenced parameter is not present in the classifier,
    the value of this attribute is reported as 0.

    Parsed from file DOCS-QOS3-MIB.my.txt
    Company: None
    Module: DOCS-QOS3-MIB

    Description by cisco

    If EnetProtocolType is 'none', this attribute is
    ignored when considering whether a packet matches the
    current rule.
    If EnetProtocolType is 'ethertype', this attribute
    gives the 16-bit value of the EtherType that the packet
    must match in order to match the rule.
    If EnetProtocolType is 'dsap', the lower 8 bits of this
    attribute's value must match the DSAP byte of the packet
    in order to match the rule.
    If EnetProtocolType is 'mac', the lower 8 bits of this
    attribute's value represent a
    lower bound (inclusive) of MAC management message type
    codes matched, and the upper 8 bits represent the
    upper bound (inclusive) of matched MAC message type
    codes. Certain message type codes are excluded from
    matching, as specified in the reference.
    If the Ethernet frame contains an 802.1P/Q Tag header
    (i.e., EtherType 0x8100), this attribute applies
    to the embedded EtherType field within the 802.1P/Q
    header.
    If the referenced parameter is not present in the classifier,
    the value of this attribute is reported as 0.

    Information by circitor

    docsQos3PktClassEnetProtocol OBJECT-TYPE 
     SYNTAX      Unsigned32 (0..65535) 
     MAX-ACCESS  read-only 
     STATUS      current 
     DESCRIPTION 
        "If EnetProtocolType is 'none', this attribute is 
        ignored when considering whether a packet matches the 
        current rule. 
        If EnetProtocolType is 'ethertype', this attribute 
        gives the 16-bit value of the EtherType that the packet 
        must match in order to match the rule. 
        If EnetProtocolType is 'dsap', the lower 8 bits of this 
        attribute's value must match the DSAP byte of the packet 
        in order to match the rule. 
        If EnetProtocolType is 'mac', the lower 8 bits of this 
        attribute's value represent a 
        lower bound (inclusive) of MAC management message type 
        codes matched, and the upper 8 bits represent the 
        upper bound (inclusive) of matched MAC message type 
        codes.  Certain message type codes are excluded from 
        matching, as specified in the reference. 
        If the Ethernet frame contains an 802.1P/Q Tag header 
        (i.e., EtherType 0x8100), this attribute applies 
        to the embedded EtherType field within the 802.1P/Q 
        header. 
        If the referenced parameter is not present in the classifier, 
        the value of this attribute is reported as 0." 
     REFERENCE 
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface 
        Specification CM-SP-MULPIv3.0-I05-070803,  
        Ethertype/DSAP/MacType section in the Common Radio  
        Frequency Interface Encodings Annex." 
     ::= { docsQos3PktClassEntry 20 }

    Information by cisco_v1

    docsQos3PktClassEnetProtocol OBJECT-TYPE
    SYNTAX Gauge(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "If EnetProtocolType is 'none', this attribute is 
        ignored when considering whether a packet matches the 
        current rule. 
        If EnetProtocolType is 'ethertype', this attribute 
        gives the 16-bit value of the EtherType that the packet 
        must match in order to match the rule. 
        If EnetProtocolType is 'dsap', the lower 8 bits of this 
        attribute's value must match the DSAP byte of the packet 
        in order to match the rule. 
        If EnetProtocolType is 'mac', the lower 8 bits of this 
        attribute's value represent a 
        lower bound (inclusive) of MAC management message type 
        codes matched, and the upper 8 bits represent the 
        upper bound (inclusive) of matched MAC message type 
        codes.  Certain message type codes are excluded from 
        matching, as specified in the reference. 
        If the Ethernet frame contains an 802.1P/Q Tag header 
        (i.e., EtherType 0x8100), this attribute applies 
        to the embedded EtherType field within the 802.1P/Q 
        header. 
        If the referenced parameter is not present in the classifier, 
        the value of this attribute is reported as 0."
    REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface 
        Specification CM-SP-MULPIv3.0-I05-070803,  
        Ethertype/DSAP/MacType section in the Common Radio  
        Frequency Interface Encodings Annex."
    ::= { docsQos3PktClassEntry 20 }

    Information by oid_info

    Vendor: Cable Television Laboratories, Inc.
    Module: DOCS-QOS3-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    docsQos3PktClassEnetProtocol OBJECT-TYPE 
     SYNTAX      Unsigned32 (0..65535) 
     MAX-ACCESS  read-only 
     STATUS      current 
     DESCRIPTION 
        "If EnetProtocolType is 'none', this attribute is 
        ignored when considering whether a packet matches the 
        current rule. 
        If EnetProtocolType is 'ethertype', this attribute 
        gives the 16-bit value of the EtherType that the packet 
        must match in order to match the rule. 
        If EnetProtocolType is 'dsap', the lower 8 bits of this 
        attribute's value must match the DSAP byte of the packet 
        in order to match the rule. 
        If EnetProtocolType is 'mac', the lower 8 bits of this 
        attribute's value represent a 
        lower bound (inclusive) of MAC management message type 
        codes matched, and the upper 8 bits represent the 
        upper bound (inclusive) of matched MAC message type 
        codes.  Certain message type codes are excluded from 
        matching, as specified in the reference. 
        If the Ethernet frame contains an 802.1P/Q Tag header 
        (i.e., EtherType 0x8100), this attribute applies 
        to the embedded EtherType field within the 802.1P/Q 
        header. 
        If the referenced parameter is not present in the classifier, 
        the value of this attribute is reported as 0." 
     REFERENCE 
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface 
        Specification CM-SP-MULPIv3.0-I05-070803,  
        Ethertype/DSAP/MacType section in the Common Radio  
        Frequency Interface Encodings Annex." 
     ::= { docsQos3PktClassEntry 20 }

    Information by cisco

    docsQos3PktClassEnetProtocol OBJECT-TYPE
    SYNTAX          Unsigned32 (0..65535)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "If EnetProtocolType is 'none', this attribute is
        ignored when considering whether a packet matches the 
        current rule. 
        If EnetProtocolType is 'ethertype', this attribute 
        gives the 16-bit value of the EtherType that the packet 
        must match in order to match the rule. 
        If EnetProtocolType is 'dsap', the lower 8 bits of this 
        attribute's value must match the DSAP byte of the packet 
        in order to match the rule. 
        If EnetProtocolType is 'mac', the lower 8 bits of this 
        attribute's value represent a 
        lower bound (inclusive) of MAC management message type 
        codes matched, and the upper 8 bits represent the 
        upper bound (inclusive) of matched MAC message type 
        codes.  Certain message type codes are excluded from 
        matching, as specified in the reference. 
        If the Ethernet frame contains an 802.1P/Q Tag header 
        (i.e., EtherType 0x8100), this attribute applies 
        to the embedded EtherType field within the 802.1P/Q 
        header. 
        If the referenced parameter is not present in the classifier, 
        the value of this attribute is reported as 0."
    REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface 
        Specification CM-SP-MULPIv3.0-I05-070803,  
        Ethertype/DSAP/MacType section in the Common Radio  
        Frequency Interface Encodings Annex." 
    ::= { docsQos3PktClassEntry 20 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Ralph Brown

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Maria Stachelek

    Brothers (28)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.4491.2.1.21.1.1.1.1 docsQos3PktClassId 0 0 This key indicates the assigned identifier to the
    packet classifier instance by the CMTS, which is unique
    per Service Flow.
    For UD…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.2 docsQos3PktClassDirection 0 0 This attribute indicates the direction to which the
    classifier is applied.
    1.3.6.1.4.1.4491.2.1.21.1.1.1.3 docsQos3PktClassPriority 0 0 This attribute specifies the order of evaluation
    of the classifiers.
    The higher the value, the higher the priority.
    The value of 0…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.4 docsQos3PktClassIpTosLow 0 0 This attribute indicates the low value of a range of
    TOS byte values.
    If the referenced parameter is not present in a classifier,…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.5 docsQos3PktClassIpTosHigh 0 0 This attribute indicates the 8-bit high value of a
    range of TOS byte values.
    If the referenced parameter is not present in a clas…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.6 docsQos3PktClassIpTosMask 0 0 This attribute indicates the mask value is bitwise
    ANDed with TOS byte in an IP packet, and this value is
    used for range checking…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.7 docsQos3PktClassIpProtocol 0 0 This attribute indicates the value of the IP Protocol
    field required for IP packets to match this rule.

    The value 256 matches tra…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.8 docsQos3PktClassIpSourceAddr 0 0 This attribute specifies the value of the IP Source
    Address required for packets to match this rule.
    An IP packet matches the rul…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.9 docsQos3PktClassIpSourceMask 0 0 This attribute specifies which bits of a packet's
    IP Source Address are compared to match this rule.
    An IP packet matches the rul…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.10 docsQos3PktClassIpDestAddr 0 0 This attribute specifies the value of the IP Destination
    Address required for packets to match this rule.

    An IP packet matches th…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.11 docsQos3PktClassIpDestMask 0 0 This attribute specifies which bits of a packet's
    IP Destination Address are compared to match this rule.

    An IP packet matches th…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.12 docsQos3PktClassSourcePortStart 0 0 This attribute specifies the low-end inclusive range
    of TCP/UDP source port numbers to which a packet
    is compared. This attribut…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.13 docsQos3PktClassSourcePortEnd 0 0 This attribute specifies the high-end inclusive
    range of TCP/UDP source port numbers to which a packet
    is compared. This attribu…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.14 docsQos3PktClassDestPortStart 0 0 This attribute specifies the low-end inclusive range
    of TCP/UDP destination port numbers to which a packet
    is compared.
    If the re…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.15 docsQos3PktClassDestPortEnd 0 0 This attribute specifies the high-end inclusive
    range of TCP/UDP destination port numbers to which a
    packet is compared.
    If the re…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.16 docsQos3PktClassDestMacAddr 0 0 An Ethernet packet matches an entry when its destination
    MAC address bitwise ANDed with DestMacMask equals
    the value of DestMacAd…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.17 docsQos3PktClassDestMacMask 0 0 An Ethernet packet matches an entry when its destination
    MAC address bitwise ANDed with DestMacMask equals
    the value of DestMacAd…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.18 docsQos3PktClassSourceMacAddr 0 0 An Ethernet packet matches this entry when its source
    MAC address equals the value of this attribute.
    If the referenced parameter…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.19 docsQos3PktClassEnetProtocolType 0 0 This attribute indicates the format of the layer 3
    protocol ID in the Ethernet packet. A value of 'none'
    means that the rule doe…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.22 docsQos3PktClassUserPriLow 0 0 This attribute applies only to Ethernet frames using
    the 802.1P/Q tag header (indicated with EtherType
    0x8100). Such frames incl…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.23 docsQos3PktClassUserPriHigh 0 0 This attribute applies only to Ethernet frames using
    the 802.1P/Qtag header (indicated with EtherType
    0x8100). Such frames inclu…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.24 docsQos3PktClassVlanId 0 0 This attribute applies only to Ethernet frames
    using the 802.1P/Q tag header.
    Tagged packets must have a VLAN Identifier that mat…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.25 docsQos3PktClassState 0 0 This attribute indicates whether or not the classifier
    is enabled to classify packets to a Service Flow.

    If the referenced parame…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.26 docsQos3PktClassPkts 0 0 This attribute counts the number of packets that have
    been classified using this entry. This includes
    all packets delivered to a …
    1.3.6.1.4.1.4491.2.1.21.1.1.1.27 docsQos3PktClassBitMap 0 0 This attribute indicates which parameter encodings
    were actually present in the DOCSIS packet classifier
    encoding signaled in the…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.28 docsQos3PktClassIpAddrType 0 0 This attribute indicates the type of the Internet
    address for InetSourceAddr, InetSourceMask, InetDestAddr,
    and InetDestMask.
    If t…
    1.3.6.1.4.1.4491.2.1.21.1.1.1.29 docsQos3PktClassFlowLabel 0 0 This attribute represents the Flow Label field in
    the IPv6 header to be matched by the classifier.
    The value zero indicates that …
    1.3.6.1.4.1.4491.2.1.21.1.1.1.30 docsQos3PktClassCmInterfaceMask 0 0 This attribute represents a bit-mask of the CM in-bound
    interfaces to which this classifer applies.
    This attribute only applies t…