This attribute represents the Flow Label field in
the IPv6 header to be matched by the classifier.
The value zero indicates that the Flow Label is not specified
as part of the classifier and is not matched against
the packets.
Parsed from file DOCS-QOS3-MIB.mib
Module: DOCS-QOS3-MIB
This attribute represents the Flow Label field in
the IPv6 header to be matched by the classifier.
The value zero indicates that the Flow Label is not specified
as part of the classifier and is not matched against
the packets.
This attribute represents the Flow Label field in
the IPv6 header to be matched by the classifier.
The value zero indicates that the Flow Label is not specified
as part of the classifier and is not matched against
the packets.
Parsed from file DOCS-QOS3-MIB.my.txt
Company: None
Module: DOCS-QOS3-MIB
This attribute represents the Flow Label field in
the IPv6 header to be matched by the classifier.
The value zero indicates that the Flow Label is not specified
as part of the classifier and is not matched against
the packets.
docsQos3PktClassFlowLabel OBJECT-TYPE SYNTAX Unsigned32 (0..1048575) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Flow Label field in the IPv6 header to be matched by the classifier. The value zero indicates that the Flow Label is not specified as part of the classifier and is not matched against the packets." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IPv6 Flow Label section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 29 }
docsQos3PktClassFlowLabel OBJECT-TYPE SYNTAX Gauge(0..1048575) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the Flow Label field in the IPv6 header to be matched by the classifier. The value zero indicates that the Flow Label is not specified as part of the classifier and is not matched against the packets." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IPv6 Flow Label section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 29 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-QOS3-MIB
[Automatically extracted from oidview.com]
docsQos3PktClassFlowLabel OBJECT-TYPE SYNTAX Unsigned32 (0..1048575) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Flow Label field in the IPv6 header to be matched by the classifier. The value zero indicates that the Flow Label is not specified as part of the classifier and is not matched against the packets." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IPv6 Flow Label section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 29 }
docsQos3PktClassFlowLabel OBJECT-TYPE SYNTAX Unsigned32 (0..1048575) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the Flow Label field in the IPv6 header to be matched by the classifier. The value zero indicates that the Flow Label is not specified as part of the classifier and is not matched against the packets." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, IPv6 Flow Label section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3PktClassEntry 29 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4491.2.1.21.1.1.1.1 | docsQos3PktClassId | 0 | 0 | This key indicates the assigned identifier to the packet classifier instance by the CMTS, which is unique per Service Flow. For UD… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.2 | docsQos3PktClassDirection | 0 | 0 | This attribute indicates the direction to which the classifier is applied. |
1.3.6.1.4.1.4491.2.1.21.1.1.1.3 | docsQos3PktClassPriority | 0 | 0 | This attribute specifies the order of evaluation of the classifiers. The higher the value, the higher the priority. The value of 0… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.4 | docsQos3PktClassIpTosLow | 0 | 0 | This attribute indicates the low value of a range of TOS byte values. If the referenced parameter is not present in a classifier,… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.5 | docsQos3PktClassIpTosHigh | 0 | 0 | This attribute indicates the 8-bit high value of a range of TOS byte values. If the referenced parameter is not present in a clas… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.6 | docsQos3PktClassIpTosMask | 0 | 0 | This attribute indicates the mask value is bitwise ANDed with TOS byte in an IP packet, and this value is used for range checking… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.7 | docsQos3PktClassIpProtocol | 0 | 0 | This attribute indicates the value of the IP Protocol field required for IP packets to match this rule. The value 256 matches tra… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.8 | docsQos3PktClassIpSourceAddr | 0 | 0 | This attribute specifies the value of the IP Source Address required for packets to match this rule. An IP packet matches the rul… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.9 | docsQos3PktClassIpSourceMask | 0 | 0 | This attribute specifies which bits of a packet's IP Source Address are compared to match this rule. An IP packet matches the rul… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.10 | docsQos3PktClassIpDestAddr | 0 | 0 | This attribute specifies the value of the IP Destination Address required for packets to match this rule. An IP packet matches th… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.11 | docsQos3PktClassIpDestMask | 0 | 0 | This attribute specifies which bits of a packet's IP Destination Address are compared to match this rule. An IP packet matches th… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.12 | docsQos3PktClassSourcePortStart | 0 | 0 | This attribute specifies the low-end inclusive range of TCP/UDP source port numbers to which a packet is compared. This attribut… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.13 | docsQos3PktClassSourcePortEnd | 0 | 0 | This attribute specifies the high-end inclusive range of TCP/UDP source port numbers to which a packet is compared. This attribu… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.14 | docsQos3PktClassDestPortStart | 0 | 0 | This attribute specifies the low-end inclusive range of TCP/UDP destination port numbers to which a packet is compared. If the re… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.15 | docsQos3PktClassDestPortEnd | 0 | 0 | This attribute specifies the high-end inclusive range of TCP/UDP destination port numbers to which a packet is compared. If the re… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.16 | docsQos3PktClassDestMacAddr | 0 | 0 | An Ethernet packet matches an entry when its destination MAC address bitwise ANDed with DestMacMask equals the value of DestMacAd… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.17 | docsQos3PktClassDestMacMask | 0 | 0 | An Ethernet packet matches an entry when its destination MAC address bitwise ANDed with DestMacMask equals the value of DestMacAd… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.18 | docsQos3PktClassSourceMacAddr | 0 | 0 | An Ethernet packet matches this entry when its source MAC address equals the value of this attribute. If the referenced parameter… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.19 | docsQos3PktClassEnetProtocolType | 0 | 0 | This attribute indicates the format of the layer 3 protocol ID in the Ethernet packet. A value of 'none' means that the rule doe… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.20 | docsQos3PktClassEnetProtocol | 0 | 0 | If EnetProtocolType is 'none', this attribute is ignored when considering whether a packet matches the current rule. If EnetProtoc… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.22 | docsQos3PktClassUserPriLow | 0 | 0 | This attribute applies only to Ethernet frames using the 802.1P/Q tag header (indicated with EtherType 0x8100). Such frames incl… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.23 | docsQos3PktClassUserPriHigh | 0 | 0 | This attribute applies only to Ethernet frames using the 802.1P/Qtag header (indicated with EtherType 0x8100). Such frames inclu… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.24 | docsQos3PktClassVlanId | 0 | 0 | This attribute applies only to Ethernet frames using the 802.1P/Q tag header. Tagged packets must have a VLAN Identifier that mat… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.25 | docsQos3PktClassState | 0 | 0 | This attribute indicates whether or not the classifier is enabled to classify packets to a Service Flow. If the referenced parame… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.26 | docsQos3PktClassPkts | 0 | 0 | This attribute counts the number of packets that have been classified using this entry. This includes all packets delivered to a … |
1.3.6.1.4.1.4491.2.1.21.1.1.1.27 | docsQos3PktClassBitMap | 0 | 0 | This attribute indicates which parameter encodings were actually present in the DOCSIS packet classifier encoding signaled in the… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.28 | docsQos3PktClassIpAddrType | 0 | 0 | This attribute indicates the type of the Internet address for InetSourceAddr, InetSourceMask, InetDestAddr, and InetDestMask. If t… |
1.3.6.1.4.1.4491.2.1.21.1.1.1.30 | docsQos3PktClassCmInterfaceMask | 0 | 0 | This attribute represents a bit-mask of the CM in-bound interfaces to which this classifer applies. This attribute only applies t… |