Reference record for OID 1.3.6.1.4.1.4491.2.1.21.1.3.1.9



parent
1.3.6.1.4.1.4491.2.1.21.1.3.1 (docsQos3ServiceFlowEntry)
node code
9
node name
docsQos3ServiceFlowParamSetTypeStatus
dot oid
1.3.6.1.4.1.4491.2.1.21.1.3.1.9
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3ServiceFlowTable(3) docsQos3ServiceFlowEntry(1) docsQos3ServiceFlowParamSetTypeStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3ServiceFlowTable(3) docsQos3ServiceFlowEntry(1) docsQos3ServiceFlowParamSetTypeStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3ServiceFlowTable(3) docsQos3ServiceFlowEntry(1) docsQos3ServiceFlowParamSetTypeStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3ServiceFlowTable(3) docsQos3ServiceFlowEntry(1) docsQos3ServiceFlowParamSetTypeStatus(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3ServiceFlowTable(3) docsQos3ServiceFlowEntry(1) docsQos3ServiceFlowParamSetTypeStatus(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3ServiceFlowTable(3) docsQos3ServiceFlowEntry(1) docsQos3ServiceFlowParamSetTypeStatus(9)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3ServiceFlowTable/docsQos3ServiceFlowEntry/docsQos3ServiceFlowParamSetTypeStatus
  • /iso/identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3ServiceFlowTable/docsQos3ServiceFlowEntry/docsQos3ServiceFlowParamSetTypeStatus
  • /iso/org/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3ServiceFlowTable/docsQos3ServiceFlowEntry/docsQos3ServiceFlowParamSetTypeStatus
  • /iso/org/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3ServiceFlowTable/docsQos3ServiceFlowEntry/docsQos3ServiceFlowParamSetTypeStatus
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3ServiceFlowTable/docsQos3ServiceFlowEntry/docsQos3ServiceFlowParamSetTypeStatus
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3ServiceFlowTable/docsQos3ServiceFlowEntry/docsQos3ServiceFlowParamSetTypeStatus
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/4491/2/1/21/1/3/1/9

    Description by circitor

    This attribute represents the status of the service
    flow based on the admission state.
    'active' bit set to '1' indicates that the service flow
    is active and that the corresponding QOS ParamSet
    is stored in the CMTS.
    'admitted' bit set to '1' indicates that the service
    flow resources were reserved and that the corresponding
    QOS ParamSet is stored in the CMTS.
    'provisioned' bit set to '1' indicates that the service
    flow was defined in the CM config file and that the
    corresponding QOS ParamSet is stored in the CMTS.

    Parsed from file DOCS-QOS3-MIB.mib
    Module: DOCS-QOS3-MIB

    Description by cisco_v1

    This attribute represents the status of the service
    flow based on the admission state.
    'active' bit set to '1' indicates that the service flow
    is active and that the corresponding QOS ParamSet
    is stored in the CMTS.
    'admitted' bit set to '1' indicates that the service
    flow resources were reserved and that the corresponding
    QOS ParamSet is stored in the CMTS.
    'provisioned' bit set to '1' indicates that the service
    flow was defined in the CM config file and that the
    corresponding QOS ParamSet is stored in the CMTS.

    Description by mibdepot

    This attribute represents the status of the service
    flow based on the admission state.
    'active' bit set to '1' indicates that the service flow
    is active and that the corresponding QOS ParamSet
    is stored in the CMTS.
    'admitted' bit set to '1' indicates that the service
    flow resources were reserved and that the corresponding
    QOS ParamSet is stored in the CMTS.
    'provisioned' bit set to '1' indicates that the service
    flow was defined in the CM config file and that the
    corresponding QOS ParamSet is stored in the CMTS.

    Parsed from file DOCS-QOS3-MIB.my.txt
    Company: None
    Module: DOCS-QOS3-MIB

    Description by cisco

    This attribute represents the status of the service
    flow based on the admission state.
    'active' bit set to '1' indicates that the service flow
    is active and that the corresponding QOS ParamSet
    is stored in the CMTS.
    'admitted' bit set to '1' indicates that the service
    flow resources were reserved and that the corresponding
    QOS ParamSet is stored in the CMTS.
    'provisioned' bit set to '1' indicates that the service
    flow was defined in the CM config file and that the
    corresponding QOS ParamSet is stored in the CMTS.

    Information by circitor

    docsQos3ServiceFlowParamSetTypeStatus OBJECT-TYPE 
     SYNTAX      BITS { 
 
                        active(0), 
                        admitted(1), 
                        provisioned(2) 
                      } 
     MAX-ACCESS  read-only 
     STATUS      current 
     DESCRIPTION 
        "This attribute represents the status of the service 
        flow based on the admission state. 
        'active' bit set to '1' indicates that the service flow 
        is active and that the corresponding QOS ParamSet 
        is stored in the CMTS. 
        'admitted' bit set to '1' indicates that the service 
        flow resources were reserved  and that the corresponding 
        QOS ParamSet is stored in the CMTS. 
        'provisioned' bit set to '1' indicates that the service 
        flow was defined in the CM config file and that the 
        corresponding QOS ParamSet is stored in the CMTS." 
     REFERENCE 
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface 
        Specification CM-SP-MULPIv3.0-I05-070803, Service  
        Flow Section." 
     ::= { docsQos3ServiceFlowEntry 9 }

    Information by cisco_v1

    docsQos3ServiceFlowParamSetTypeStatus OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(1..2))
        
        
        
        
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This attribute represents the status of the service 
        flow based on the admission state. 
        'active' bit set to '1' indicates that the service flow 
        is active and that the corresponding QOS ParamSet 
        is stored in the CMTS. 
        'admitted' bit set to '1' indicates that the service 
        flow resources were reserved  and that the corresponding 
        QOS ParamSet is stored in the CMTS. 
        'provisioned' bit set to '1' indicates that the service 
        flow was defined in the CM config file and that the 
        corresponding QOS ParamSet is stored in the CMTS."
    REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface 
        Specification CM-SP-MULPIv3.0-I05-070803, Service  
        Flow Section."
    ::= { docsQos3ServiceFlowEntry 9 }

    Information by oid_info

    Vendor: Cable Television Laboratories, Inc.
    Module: DOCS-QOS3-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    docsQos3ServiceFlowParamSetTypeStatus OBJECT-TYPE 
     SYNTAX      BITS { 
 
                        active(0), 
                        admitted(1), 
                        provisioned(2) 
                      } 
     MAX-ACCESS  read-only 
     STATUS      current 
     DESCRIPTION 
        "This attribute represents the status of the service 
        flow based on the admission state. 
        'active' bit set to '1' indicates that the service flow 
        is active and that the corresponding QOS ParamSet 
        is stored in the CMTS. 
        'admitted' bit set to '1' indicates that the service 
        flow resources were reserved  and that the corresponding 
        QOS ParamSet is stored in the CMTS. 
        'provisioned' bit set to '1' indicates that the service 
        flow was defined in the CM config file and that the 
        corresponding QOS ParamSet is stored in the CMTS." 
     REFERENCE 
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface 
        Specification CM-SP-MULPIv3.0-I05-070803, Service  
        Flow Section." 
     ::= { docsQos3ServiceFlowEntry 9 }

    Information by cisco

    docsQos3ServiceFlowParamSetTypeStatus OBJECT-TYPE
    SYNTAX          BITS {
                        active(0),
                        admitted(1),
                        provisioned(2)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This attribute represents the status of the service
        flow based on the admission state. 
        'active' bit set to '1' indicates that the service flow 
        is active and that the corresponding QOS ParamSet 
        is stored in the CMTS. 
        'admitted' bit set to '1' indicates that the service 
        flow resources were reserved  and that the corresponding 
        QOS ParamSet is stored in the CMTS. 
        'provisioned' bit set to '1' indicates that the service 
        flow was defined in the CM config file and that the 
        corresponding QOS ParamSet is stored in the CMTS."
    REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface 
        Specification CM-SP-MULPIv3.0-I05-070803, Service  
        Flow Section." 
    ::= { docsQos3ServiceFlowEntry 9 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Ralph Brown

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Maria Stachelek

    Brothers (7)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.4491.2.1.21.1.3.1.1 docsQos3ServiceFlowId 0 0 This key represents an identifier assigned to a Service
    Flow by CMTS within a MAC Domain.
    The value 0 is used only for the purpos…
    1.3.6.1.4.1.4491.2.1.21.1.3.1.6 docsQos3ServiceFlowSID 0 0 Service Identifier (SID) assigned to an admitted
    or active Service Flow. This attribute
    reports a value of 0 if a Service ID is …
    1.3.6.1.4.1.4491.2.1.21.1.3.1.7 docsQos3ServiceFlowDirection 0 0 This attribute represents the direction of the Service
    Flow.
    1.3.6.1.4.1.4491.2.1.21.1.3.1.8 docsQos3ServiceFlowPrimary 0 0 This attribute reflects whether Service Flow is the
    primary
    or a secondary Service Flow.
    1.3.6.1.4.1.4491.2.1.21.1.3.1.10 docsQos3ServiceFlowChSetId 0 0 This attribute represents the Channel Set Id associated
    with the service flow.
    1.3.6.1.4.1.4491.2.1.21.1.3.1.11 docsQos3ServiceFlowAttrAssignSuccess 0 0 If set to 'true', this attribute indicates that the
    current channel set associated with the service flow
    meets the Required and F…
    1.3.6.1.4.1.4491.2.1.21.1.3.1.12 docsQos3ServiceFlowDsid 0 0 This attribute indicates the DSID associated with
    the downstream service flow. downstream service flows
    without a DSID or upstrea…