A Table for setting multiple parameters of multiple
QAM channels.
Creating an entry in this table will set automatically
all QAM Channels in the containment tree of
docsIfMCmtsEqamGlobCfgDownPhysicalIndex in
entPhysicalContainsTable to the parameter values
specified during the row creation.
docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be a valid
Physical index of entPhysicalTable.
The ways to configure QAM channels parameters are:
1) Globally.
Using this table, docsIfMCmtsEqamGlobCfgDownTable
2) Directly.
Using docsIfMCmtsEqamDownstreamTable and
docsIfDownstreamChannelTable to change parameters
and lock status of individual QAM channels.
In general an entry in this table will set the parameters
of QAM channels of the containment tree recursively the
same way as doing directly as described in 2)above. It
means, potentially there could be rejections based on
locked parameters and/or PHY dependencies that prevent
the sets.
The row creation in this table is not rejected or set in
'inactive' or 'notInService' state due individual QAM
channels in the group failures due the global set, instead,
an error status is reported per entry.
The processing of the entries in this table (e.g., at system
initialization) is sequential; therefore, it could be
overlapping rules based on the containment tree level of
the entries.
A Table for setting multiple parameters of multiple
QAM channels.
Creating an entry in this table will set automatically
all QAM Channels in the containment tree of
docsIfMCmtsEqamGlobCfgDownPhysicalIndex in
entPhysicalContainsTable to the parameter values
specified during the row creation.
docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be a valid
Physical index of entPhysicalTable.
The ways to configure QAM channels parameters are:
1) Globally.
Using this table, docsIfMCmtsEqamGlobCfgDownTable
2) Directly.
Using docsIfMCmtsEqamDownstreamTable and
docsIfDownstreamChannelTable to change parameters
and lock status of individual QAM channels.
In general an entry in this table will set the parameters
of QAM channels of the containment tree recursively the
same way as doing directly as described in 2)above. It
means, potentially there could be rejections based on
locked parameters and/or PHY dependencies that prevent
the sets.
The row creation in this table is not rejected or set in
'inactive' or 'notInService' state due individual QAM
channels in the group failures due the global set, instead,
an error status is reported per entry.
The processing of the entries in this table (e.g., at system
initialization) is sequential; therefore, it could be
overlapping rules based on the containment tree level of
the entries.
Parsed from file DOCS-IF-M-CMTS-MIB.my.txt
Company: None
Module: DOCS-IF-M-CMTS-MIB
A Table for setting multiple parameters of multiple
QAM channels.
Creating an entry in this table will set automatically
all QAM Channels in the containment tree of
docsIfMCmtsEqamGlobCfgDownPhysicalIndex in
entPhysicalContainsTable to the parameter values
specified during the row creation.
docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be a valid
Physical index of entPhysicalTable.
The ways to configure QAM channels parameters are:
1) Globally.
Using this table, docsIfMCmtsEqamGlobCfgDownTable
2) Directly.
Using docsIfMCmtsEqamDownstreamTable and
docsIfDownstreamChannelTable to change parameters
and lock status of individual QAM channels.
In general an entry in this table will set the parameters
of QAM channels of the containment tree recursively the
same way as doing directly as described in 2)above. It
means, potentially there could be rejections based on
locked parameters and/or PHY dependencies that prevent
the sets.
The row creation in this table is not rejected or set in
'inactive' or 'notInService' state due individual QAM
channels in the group failures due the global set, instead,
an error status is reported per entry.
The processing of the entries in this table (e.g., at system
initialization) is sequential; therefore, it could be
overlapping rules based on the containment tree level of
the entries.
docsIfMCmtsEqamGlobCfgDownTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIfMCmtsEqamGlobCfgDownEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Table for setting multiple parameters of multiple QAM channels. Creating an entry in this table will set automatically all QAM Channels in the containment tree of docsIfMCmtsEqamGlobCfgDownPhysicalIndex in entPhysicalContainsTable to the parameter values specified during the row creation. docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be a valid Physical index of entPhysicalTable. The ways to configure QAM channels parameters are: 1) Globally. Using this table, docsIfMCmtsEqamGlobCfgDownTable 2) Directly. Using docsIfMCmtsEqamDownstreamTable and docsIfDownstreamChannelTable to change parameters and lock status of individual QAM channels. In general an entry in this table will set the parameters of QAM channels of the containment tree recursively the same way as doing directly as described in 2)above. It means, potentially there could be rejections based on locked parameters and/or PHY dependencies that prevent the sets. The row creation in this table is not rejected or set in 'inactive' or 'notInService' state due individual QAM channels in the group failures due the global set, instead, an error status is reported per entry. The processing of the entries in this table (e.g., at system initialization) is sequential; therefore, it could be overlapping rules based on the containment tree level of the entries." ::= { docsIfMCmtsEqamObjects 4 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-IF-M-CMTS-MIB
[Automatically extracted from oidview.com]
docsIfMCmtsEqamGlobCfgDownTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIfMCmtsEqamGlobCfgDownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table for setting multiple parameters of multiple QAM channels. Creating an entry in this table will set automatically all QAM Channels in the containment tree of docsIfMCmtsEqamGlobCfgDownPhysicalIndex in entPhysicalContainsTable to the parameter values specified during the row creation. docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be a valid Physical index of entPhysicalTable. The ways to configure QAM channels parameters are: 1) Globally. Using this table, docsIfMCmtsEqamGlobCfgDownTable 2) Directly. Using docsIfMCmtsEqamDownstreamTable and docsIfDownstreamChannelTable to change parameters and lock status of individual QAM channels. In general an entry in this table will set the parameters of QAM channels of the containment tree recursively the same way as doing directly as described in 2)above. It means, potentially there could be rejections based on locked parameters and/or PHY dependencies that prevent the sets. The row creation in this table is not rejected or set in 'inactive' or 'notInService' state due individual QAM channels in the group failures due the global set, instead, an error status is reported per entry. The processing of the entries in this table (e.g., at system initialization) is sequential; therefore, it could be overlapping rules based on the containment tree level of the entries." ::= { docsIfMCmtsEqamObjects 4 }
docsIfMCmtsEqamGlobCfgDownTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsIfMCmtsEqamGlobCfgDownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table for setting multiple parameters of multiple QAM channels. Creating an entry in this table will set automatically all QAM Channels in the containment tree of docsIfMCmtsEqamGlobCfgDownPhysicalIndex in entPhysicalContainsTable to the parameter values specified during the row creation. docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be a valid Physical index of entPhysicalTable. The ways to configure QAM channels parameters are: 1) Globally. Using this table, docsIfMCmtsEqamGlobCfgDownTable 2) Directly. Using docsIfMCmtsEqamDownstreamTable and docsIfDownstreamChannelTable to change parameters and lock status of individual QAM channels. In general an entry in this table will set the parameters of QAM channels of the containment tree recursively the same way as doing directly as described in 2)above. It means, potentially there could be rejections based on locked parameters and/or PHY dependencies that prevent the sets. The row creation in this table is not rejected or set in 'inactive' or 'notInService' state due individual QAM channels in the group failures due the global set, instead, an error status is reported per entry. The processing of the entries in this table (e.g., at system initialization) is sequential; therefore, it could be overlapping rules based on the containment tree level of the entries." ::= { docsIfMCmtsEqamObjects 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1 | docsIfMCmtsEqamGlobCfgDownEntry | 13 | 13 | The index of this table. Entries in this table persist after system re-initalization. It is common to have 'holes' in this table si… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1.3.1 | docsIfMCmtsEqamDownstreamTable | 1 | 10 | M-CMTS EQAM extensions for the DOCSIS RFI Downstream docsIfDownstreamTable. |
| 1.3.6.1.4.1.4491.2.1.6.1.3.2 | docsIfMCmtsEqamDownstreamCapabilitiesTable | 1 | 10 | This table contains the QAM channel capabilities for the M-CMTS Downstream Interface PHY parameters in the EQAM device. |
| 1.3.6.1.4.1.4491.2.1.6.1.3.3 | docsIfMCmtsEqamGroupDependencyTable | 1 | 5 | This table describes the rules that identify groups of QAM channels with PHY parameters dependencies. A PHY parameter dependency … |
| 1.3.6.1.4.1.4491.2.1.6.1.3.5 | docsIfMCmtsChannelBlockTable | 1 | 7 | This table configure attributes of block channels and Controls channel Block Tests. A channel block is an ENTITY-MIB containment … |