A port entry containing objects at the port level
for a particular port.
Parsed from file s3tok430.mib.txt
Company: None
Module: SYNOPTICS-TOKENRING-MIB
A port entry containing objects at the port level
for a particular port.
Parsed from file SYNOPTICS-BASIC-ETHTOK-MIB.mib
Module: SYNOPTICS-BASIC-ETHTOK-MIB
Vendor: Nortel Networks
Module: SYNOPTICS-TOKENRING-MIB (s3tok430.mib)
Type: ENTRY
Access: not-accessible
Syntax: S3TrPortEntry
Automatically extracted from www.mibdepot.com
s3TrPortEntry OBJECT-TYPE SYNTAX S3TrPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A port entry containing objects at the port level for a particular port." INDEX { s3TrPortBoardIndex, s3TrPortIndex } ::= { s3TrPortTable 1 }
s3TrPortEntry OBJECT-TYPE SYNTAX S3TrPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A port entry containing objects at the port level for a particular port." INDEX { s3TrPortBoardIndex, s3TrPortIndex } ::= { s3TrPortTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.3.3.3.1.1.1 | s3TrPortBoardIndex | 0 | 0 | A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from o… |
1.3.6.1.4.1.45.1.3.3.3.1.1.2 | s3TrPortIndex | 0 | 0 | A unique value for each port. Its value ranges between 1 and 12. The value for each port must remain constant at least from one… |
1.3.6.1.4.1.45.1.3.3.3.1.1.3 | s3TrPortWrap | 0 | 0 | Status of the port. Setting wrap(2) disconnects the port from the ring and setting this object to connect(3) connects the port to… |
1.3.6.1.4.1.45.1.3.3.3.1.1.4 | s3TrPortTestLatch | 0 | 0 | Status of the test latch which is used to set the channel decoder used to monitor the health of the communication path between th… |
1.3.6.1.4.1.45.1.3.3.3.1.1.5 | s3TrPortRelayStatus | 0 | 0 | Status of the channel's present relay mode. On(2) means the channel is in the ring and off(3) means the channel is bypassed. |
1.3.6.1.4.1.45.1.3.3.3.1.1.6 | s3TrPortPhantomStatus | 0 | 0 | Status of the ring access request signal. |
1.3.6.1.4.1.45.1.3.3.3.1.1.7 | s3TrPortPhantomChangeFlag | 0 | 0 | Change(3) indicates that port phantom has been changed from OFF to ON. After inquiry by NMS, it will be cleared to noChange(2). … |
1.3.6.1.4.1.45.1.3.3.3.1.1.8 | s3TrPortChgSyn2IBM | 0 | 0 | If the port is on a ring in/ring out module this object changes the strap state depending on the jumper setting retrieved as s3Tr… |
1.3.6.1.4.1.45.1.3.3.3.1.1.9 | s3TrPortStrap | 0 | 0 | If the port is on a ring in/ring out module this object signifies whether the hardware jumper is in synoptics(2) mode or ibm(3) m… |
1.3.6.1.4.1.45.1.3.3.3.1.1.10 | s3TrPortLineErrs | 0 | 0 | Number of line errors. Section 3.8.1 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.11 | s3TrPortBurstErrs | 0 | 0 | Number of burst errors. Section 3.8.3 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.12 | s3TrPortAriFciErrs | 0 | 0 | Number of ARI FCI errors. See AC errors, Section 3.8.4 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.13 | s3TrPortLostFrames | 0 | 0 | Number of frames lost. Section 3.8.6 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.14 | s3TrPortRcvCongestErrs | 0 | 0 | Number of receive congestion errors. Section 3.8.7 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.15 | s3TrPortFrmCopyErrs | 0 | 0 | Number of frame copy errors. Section 3.8.8 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.16 | s3TrPortTokenErrs | 0 | 0 | Number of token errors. Section 3.8.10 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.17 | s3TrPortInternalErrs | 0 | 0 | Number of internal errors. Section 3.8.2 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.18 | s3TrPortAbortTransErrs | 0 | 0 | Number of abort delimiter transmitted errors. Section 3.8.5 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.19 | s3TrPortFrequencyErrs | 0 | 0 | Number of frequency errors. Section 3.8.9 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.20 | s3TrPortBeaconCnt | 0 | 0 | Number of beacon frames that have been seen. |
1.3.6.1.4.1.45.1.3.3.3.1.1.21 | s3TrPortPartTime | 0 | 0 | When wrapping the port for a specified time, s3TrPortWrap must be set with timedWrap(4) and this object must be supplied with the… |