Vendor: SynOptics
Module: S5-AGENT-MIB
[Automatically extracted from oidview.com]
s5AgentSystem OBJECT IDENTIFIER ::= { s5Agent 4 }
s5AgentSystem OBJECT IDENTIFIER ::= { s5Agent 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.4.4.1 | s5AgSysAutoPvid | 1 | 1 | This value indicates whether adding a port as a member of a VLAN automatically results in its PVID being set to be the same as th… |
1.3.6.1.4.1.45.1.6.4.4.2 | s5AgSysCurrentOperationalMode | 1 | 1 | Indicates the stacking mode. Pure stack mode does not allow BS450 and BS410 units to join stack and provides some advanced featu… |
1.3.6.1.4.1.45.1.6.4.4.3 | s5AgSysNextBootOperationalMode | 1 | 1 | Indicates the stacking mode at the next boot. A change to this object will modify the stacking mode after the system is reset/re… |
1.3.6.1.4.1.45.1.6.4.4.4 | s5AgSysBinaryConfigFilename | 1 | 1 | Name of the binary configuration file that will be downloaded/uploaded when the s5AgInfoFileAction object is set to dnldConfig(2)… |
1.3.6.1.4.1.45.1.6.4.4.5 | s5AgSysTftpServerAddress | 1 | 1 | The IP address of the TFTP server for all TFTP operations. If not used, then the value is 0.0.0.0 |
1.3.6.1.4.1.45.1.6.4.4.6 | s5AgSysAsciiConfigFilename | 1 | 1 | Name of the ascii configuration file that will be downloaded/uploaded either at boot time when the s5AgSysAsciiConfigAutoDownload… |
1.3.6.1.4.1.45.1.6.4.4.7 | s5AgSysAsciiConfigAutoDownload | 1 | 1 | Indicates whether an ASCII configuration file should be downloaded at boot time. The file can be downloaded using either the con… |
1.3.6.1.4.1.45.1.6.4.4.8 | s5AgSysAsciiConfigAutoDldStatus | 1 | 1 | Indicates the status of the last automatic ASCII configuration file download at boot time. If no automatic download at boot time… |
1.3.6.1.4.1.45.1.6.4.4.9 | s5AgSysAsciiConfigManualDownload | 1 | 1 | Indicates the status of the last manual attempt to download an ASCII configuration file. The value of this object when retrieved… |
1.3.6.1.4.1.45.1.6.4.4.10 | s5AgSysCpuIpAddress | 1 | 1 | The system's CPU IP address. Note that for a stackable system in standalone mode, this will be the standalone IP address, but in… |
1.3.6.1.4.1.45.1.6.4.4.11 | s5AgSysStackIpAddress | 1 | 1 | The stack IP address of a stackable system. A non-stackable system should never return an instance of this object, nor allow wri… |
1.3.6.1.4.1.45.1.6.4.4.12 | s5AgSysCpuNetMask | 1 | 1 | The system's CPU subnet mask. |
1.3.6.1.4.1.45.1.6.4.4.13 | s5AgSysManagementVlanId | 1 | 1 | The VLAN ID of the system's management VLAN. |
1.3.6.1.4.1.45.1.6.4.4.14 | s5AgSysBinaryConfigUnitNumber | 1 | 1 | When in standalone mode, and loading a binary configuration file that was created from a stack, this object specifies the unit nu… |
1.3.6.1.4.1.45.1.6.4.4.15 | s5AgSysStackInsertionUnitNumber | 1 | 1 | When in stack mode, this object specifies the unit number to be assigned to the next unit that joins the stack. The value may no… |
1.3.6.1.4.1.45.1.6.4.4.16 | s5AgSysSpanningTreeOperMode | 1 | 1 | This object indicates the current spanning-tree mode of the system. The meaning of specific values is: nortelStpg(1) .. The older… |
1.3.6.1.4.1.45.1.6.4.4.17 | s5AgSysSpanningTreeAdminMode | 1 | 1 | This object indicates the desired spanning-tree mode of the system. The meaning of specific values is: nortelStpg(1) .. The older… |
1.3.6.1.4.1.45.1.6.4.4.18 | s5AgSysAutoUnitReplacementEnabled | 1 | 1 | This object indicates whether the auto-unit-replacement feature is enabled or disabled. The value when retrieved will always be… |
1.3.6.1.4.1.45.1.6.4.4.19 | s5AgSysAsciiConfigManualUpload | 1 | 1 | Indicates the status of the last manual attempt to upload an ASCII configuration file. The value of this object when retrieved c… |
1.3.6.1.4.1.45.1.6.4.4.20 | s5AgSysSpanningTreePathCostCalculationMode | 1 | 1 | This object indicates the current spanning-tree path cost calculation mode of the system. Note that this object can only take th… |
1.3.6.1.4.1.45.1.6.4.4.21 | s5AgSysUsbTargetUnit | 1 | 1 | This object indicates the unit number of the USB port to be use in file upload/download operations. |
1.3.6.1.4.1.45.1.6.4.4.22 | s5AgSysSpanningTreePortMode | 1 | 1 | This object indicates the current spanning-tree port mode. |
1.3.6.1.4.1.45.1.6.4.4.23 | s5AgSysLicenseFilename | 1 | 1 | Name of the license file that will be downloaded/uploaded when the s5AgInfoFileAction object is set to dnldLicense(18), upldLicen… |
1.3.6.1.4.1.45.1.6.4.4.24 | s5AgSysSpanningTreeAdminCompatibility | 1 | 1 | This object controls the compatibility mode for various features. Note that for some features, the actual operational mode might… |
1.3.6.1.4.1.45.1.6.4.4.25 | s5AgSysSpanningTreeOperCompatibility | 1 | 1 | This object indicates the operational compatibility mode for various features controlled by the associated object, s5AgSysSpannin… |
1.3.6.1.4.1.45.1.6.4.4.26 | s5AgSysGlobalFlowControlEnabled | 1 | 1 | This object controls whether flow control for ethernet ports is globally enabled or disabled. This object is only used on system… |
1.3.6.1.4.1.45.1.6.4.4.27 | s5AgSysAutosaveToNvramEnabled | 1 | 1 | This object controls whether autosaving to NVRAM is enabled. Autosaving normally occurs periodically in a background task if any … |
1.3.6.1.4.1.45.1.6.4.4.28 | s5AgSysFlushMacAddrTableAll | 1 | 1 | Setting this object to flush(1) will flush the CDT MAC address table. On retrieval, its value is always flush(1). |
1.3.6.1.4.1.45.1.6.4.4.29 | s5AgSysFlushMacAddrTableByPortList | 1 | 1 | Setting this object will flush the CDT MAC address for all ports specified in the value. On retrieval, the value is the last val… |
1.3.6.1.4.1.45.1.6.4.4.30 | s5AgSysFlushMacAddrTableByVlan | 1 | 1 | Setting this object will flush the CDT MAC address table for the specified VLAN. On retrieval, the value is the last value set, … |
1.3.6.1.4.1.45.1.6.4.4.31 | s5AgSysFlushMacAddrTableByTrunk | 1 | 1 | Setting this object will flush the CDT MAC address table for the specified trunk. On retrieval, the value is the last value set,… |
1.3.6.1.4.1.45.1.6.4.4.32 | s5AgSysFlushMacAddrTableByAddress | 1 | 1 | Setting this object will flush the specified MAC address from the CDT MAC address table. On retrieval, its value is the last val… |
1.3.6.1.4.1.45.1.6.4.4.33 | s5AgSysVlanConfigControl | 1 | 1 | This object controls the VLAN configuration control mode: automatic - AutoPVID and automatic change to membership of port-based V… |
1.3.6.1.4.1.45.1.6.4.4.34 | s5AgSysJumboFramesEnabled | 1 | 1 | This object controls whether jumbo frames are supported. |
1.3.6.1.4.1.45.1.6.4.4.35 | s5AgSysAutoUnitReplacementSaveEnabled | 1 | 1 | This object indicates whether auto-unit-replacement automatic saving of unit images to the base unit is enabled. |
1.3.6.1.4.1.45.1.6.4.4.36 | s5AgSysAutoUnitReplacementRestore | 1 | 1 | This object is used to force the configuration of a unit to be restored from the saved configuration on the base unit. Setting t… |
1.3.6.1.4.1.45.1.6.4.4.37 | s5AgSysAutoUnitReplacementForceSave | 1 | 1 | This object is used to force the configuration of a non-base unit to be saved to the base unit. Setting it to a particular unit … |
1.3.6.1.4.1.45.1.6.4.4.38 | s5AgSysTftpServerInetAddressType | 1 | 1 | This object indicates the type of address stored in the related object s5AgSysTftpServerInetAddress. |
1.3.6.1.4.1.45.1.6.4.4.39 | s5AgSysTftpServerInetAddress | 1 | 1 | This object contains the IP address of the TFTP server for all TFTP operations. |
1.3.6.1.4.1.45.1.6.4.4.40 | s5AgSysTelnetSessionLoginAuthenType | 1 | 1 | This object controls the authentication method used for telnet session logins. The values of this object have the following mea… |
1.3.6.1.4.1.45.1.6.4.4.41 | s5AgSysSerialConsoleLoginAuthenType | 1 | 1 | This object controls the authentication method used for serial console logins. The values of this object have the following mea… |
1.3.6.1.4.1.45.1.6.4.4.42 | s5AgSysSshAuthKeyFilename | 1 | 1 | Name of the Ssh authentication key file that will be downloaded when the s5AgInfoFileAction object is set to dnldSshAuthKeyFromU… |
1.3.6.1.4.1.45.1.6.4.4.43 | s5AgSysAsciiConfigManualUploadApplications | 1 | 1 | This objects is used to specify the set of applications to be included an an ASCII configure file when it is uploaded. |
1.3.6.1.4.1.45.1.6.4.4.44 | s5AgSysOperationalLicense | 1 | 1 | The type of license currently in effect. |
1.3.6.1.4.1.45.1.6.4.4.45 | s5AgSysInstalledLicense | 1 | 1 | The type of license currently installed. |
1.3.6.1.4.1.45.1.6.4.4.46 | s5AgSysCpuIpv6Address | 1 | 1 | The system's CPU IPv6 address. Note that for a stackable system in standalone mode, this will be the standalone IPv6 address, bu… |
1.3.6.1.4.1.45.1.6.4.4.47 | s5AgSysStackIpv6Address | 1 | 1 | The stack IPv6 address of a stackable system. A non-stackable system should never return an instance of this object, nor allow w… |
1.3.6.1.4.1.45.1.6.4.4.48 | s5AgSysCpuIpv6NetMask | 1 | 1 | The system's CPU IPv6 subnet mask. |
1.3.6.1.4.1.45.1.6.4.4.49 | s5AgSysStackIpv6NetMask | 1 | 1 | The system's CPU IPv6 subnet mask. |
1.3.6.1.4.1.45.1.6.4.4.50 | s5AgSysIpv6DefaultGateway | 1 | 1 | The system's IPv6 default gateway. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.4.1 | s5AgentHw | 2 | 4 | None |
1.3.6.1.4.1.45.1.6.4.2 | s5AgentInfo | 14 | 105 | None |
1.3.6.1.4.1.45.1.6.4.3 | s5AgentMgmt | 5 | 23 | None |
1.3.6.1.4.1.45.1.6.4.5 | s5AgentBanner | 2 | 7 | None |
1.3.6.1.4.1.45.1.6.4.6 | s5AgentSntp | 20 | 40 | None |
1.3.6.1.4.1.45.1.6.4.7 | s5AgentSsl | 1 | 13 | None |
1.3.6.1.4.1.45.1.6.4.8 | s5AgentMib | 0 | 0 | S5-AGENT-MIB |
1.3.6.1.4.1.45.1.6.4.9 | s5AgentDaylightSavings | 25 | 50 | None |
1.3.6.1.4.1.45.1.6.4.10 | s5AgentBootConfig | 2 | 13 | None |
1.3.6.1.4.1.45.1.6.4.11 | s5AgentAsciiConfig | 1 | 9 | None |