This object is used to control whether the device uses the Simple
Network Time Protocol (SNTP), to synchronize the device's clock to
the Coordinated Universal Time (UTC).
If the value is disabled(1), the device will not synchronize it's
clock using SNTP.
If the value is unicast(2), the device will first synchronize
shortly after boot time when network access becomes available,
and periodically thereafter, as specified by the value of
s5AgSntpSyncInterval. If the value is not unicast(2) at boot,
the device will synchronize when the value is first set to
unicast(2), and periodically thereafter.
Synchronization process:
This process applies to automatic (periodic) and manual
synchronization attempts. The device will first attempt to
synchronize with the primary NTP server as defined by
s5AgSntpPrimaryServerAddress (if non-zero). If the primary
server synchonization is attempted and fails, the
s5AgSntpPrimaryServerSyncFailures counter is incremented. The
device will then attempt to synchronize with the secondary NTP
server as defined by s5AgSntpSecondaryServerAddress (if non-zero).
If the secondary server synchronization is attempted and fails,
the s5AgSntpSecondaryServerSyncFailures counter is incremented.
If synchronization succeeds with either server, the
s5AgSntpLastSyncTime and s5AgSntpLastSyncSource values are
updated. The s5AgSntpNextSyncTime value is updated on success
or failure. For the special case of first sync failures, the
system will automatically retry every few minutes until
synchronization is achieved without regard to
s5AgSntpSyncInterval.
Parsed from file s5age120.mib.txt
Company: nortel
Module: S5-AGENT-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
s5AgSntpState OBJECT-TYPE SYNTAX INTEGER { disabled(1), unicast(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to control whether the device uses the Simple Network Time Protocol (SNTP), to synchronize the device's clock to the Coordinated Universal Time (UTC). If the value is disabled(1), the device will not synchronize it's clock using SNTP. If the value is unicast(2), the device will first synchronize shortly after boot time when network access becomes available, and periodically thereafter, as specified by the value of s5AgSntpSyncInterval. If the value is not unicast(2) at boot, the device will synchronize when the value is first set to unicast(2), and periodically thereafter. Synchronization process: This process applies to automatic (periodic) and manual synchronization attempts. The device will first attempt to synchronize with the primary NTP server as defined by s5AgSntpPrimaryServerAddress (if non-zero). If the primary server synchonization is attempted and fails, the s5AgSntpPrimaryServerSyncFailures counter is incremented. The device will then attempt to synchronize with the secondary NTP server as defined by s5AgSntpSecondaryServerAddress (if non-zero). If the secondary server synchronization is attempted and fails, the s5AgSntpSecondaryServerSyncFailures counter is incremented. If synchronization succeeds with either server, the s5AgSntpLastSyncTime and s5AgSntpLastSyncSource values are updated. The s5AgSntpNextSyncTime value is updated on success or failure. For the special case of first sync failures, the system will automatically retry every few minutes until synchronization is achieved without regard to s5AgSntpSyncInterval." ::= { s5AgentSntp 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.4.6.1.0 | s5AgSntpState | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.4.6.2 | s5AgSntpPrimaryServerAddress | 1 | 1 | The IP address of the primary SNTP server. If this value is 0, synchronization to this server is not attempted. |
1.3.6.1.4.1.45.1.6.4.6.3 | s5AgSntpSecondaryServerAddress | 1 | 1 | The IP address of the secondary SNTP server. If this value is 0, synchronization to this server is not attempted. |
1.3.6.1.4.1.45.1.6.4.6.4 | s5AgSntpSyncInterval | 1 | 1 | This object controls the frequency, in hours relative to s5AgSntpLastSyncTime, that the device will attempt to synchronize with t… |
1.3.6.1.4.1.45.1.6.4.6.5 | s5AgSntpManualSyncRequest | 1 | 1 | This object is used to force the device to immediately attempt to synchronize with the NTP servers. The value returned on a get … |
1.3.6.1.4.1.45.1.6.4.6.6 | s5AgSntpLastSyncTime | 1 | 1 | This object returns the Coordinated Universal Time (UTC) when the device last synchronized with an NTP server. If the device ha… |
1.3.6.1.4.1.45.1.6.4.6.7 | s5AgSntpLastSyncSource | 1 | 1 | This object returns the IP source address of the NTP server with which this device last synchronized. If the device has never sy… |
1.3.6.1.4.1.45.1.6.4.6.8 | s5AgSntpNextSyncTime | 1 | 1 | This object returns the Coordinated Universal Time (UTC) at which the next synchronization is scheduled. For each synchronization… |
1.3.6.1.4.1.45.1.6.4.6.9 | s5AgSntpPrimaryServerSyncFailures | 1 | 1 | This object returns the number of times this device failed to synchronize with the primary, s5AgSntpPrimaryServerAddress, NTP ser… |
1.3.6.1.4.1.45.1.6.4.6.10 | s5AgSntpSecondaryServerSyncFailures | 1 | 1 | This object returns the number of times this device failed to synchronize with the secondary, s5AgSntpSecondaryServerAddress, NTP… |
1.3.6.1.4.1.45.1.6.4.6.11 | s5AgSntpCurrentTime | 1 | 1 | This object returns the device's current Coordinated Universal Time (UTC). If the device has not successfully synchronized with … |
1.3.6.1.4.1.45.1.6.4.6.12 | s5AgSntpTimeZone | 1 | 1 | This object specifies the time zone of the switch, measured as an offset in 15-minute increments from Greenwich Mean Time (GMT). … |
1.3.6.1.4.1.45.1.6.4.6.13 | s5AgSntpSyncRetryInterval | 1 | 1 | This object specifies the number of seconds the switch will wait before retrying a failed SNTP sync request. The switch will cont… |
1.3.6.1.4.1.45.1.6.4.6.14 | s5AgSntpTimeZoneAcronym | 1 | 1 | This object contains a time zone acronym. It is not used for any operational purposes, it is only used for display. |
1.3.6.1.4.1.45.1.6.4.6.15 | s5AgSntpPrimaryServerInetAddressType | 1 | 1 | The type of internet address contained in the object s5AgSntpPrimaryServerInetAddress. Together, these two objects specify the I… |
1.3.6.1.4.1.45.1.6.4.6.16 | s5AgSntpPrimaryServerInetAddress | 1 | 1 | The IP address of the primary SNTP server. |
1.3.6.1.4.1.45.1.6.4.6.17 | s5AgSntpSecondaryServerInetAddressType | 1 | 1 | The type of internet address contained in the object s5AgSntpSecondaryServerInetAddress. Together, these two objects specify the… |
1.3.6.1.4.1.45.1.6.4.6.18 | s5AgSntpSecondaryServerInetAddress | 1 | 1 | The IP address of the secondary SNTP server. |
1.3.6.1.4.1.45.1.6.4.6.19 | s5AgSntpLastSyncSourceInetAddressType | 1 | 1 | The type of internet address contained in the object s5AgSntpLastSyncSourceInetAddress. Together, these two objects specify the … |
1.3.6.1.4.1.45.1.6.4.6.20 | s5AgSntpLastSyncSourceInetAddress | 1 | 1 | The IP source address of the NTP server with which this device last synchronized. |