The switchover status of the port (and its companion).
The following values can be written:
timedSwitchover(2)...cause a timed switchover
(see value of
s5EnRedPortSwitchoverTime)
The following values reflect the switchover
status of the redundant port pair:
other(1)..............not undergoing switchover
timedSwitchover(2)....port is undergoing timed switchover
(see value of
s5EnRedPortSwitchoverTime).
On GETs with switchover status of timedSwitchover(2),
if the time remaining before the completion of the
switchover and reversal is available, it will be reported
in object s5EnRedPortSwitchoverTime as a positive value
If not available, the value of s5EnRedSwitchoverTime will
be zero. When changing a port to timedSwitchover(2), the
SET request must also contain the value for object
s5EnRedSwitchoverTime.
Parsed from file S5erl102.mib.txt
Company: None
Module: S5-ETH-REDUNDANT-LINKS-MIB
The switchover status of the port (and its companion).
The following values can be written:
timedSwitchover(2)...cause a timed switchover
(see value of
s5EnRedPortSwitchoverTime)
The following values reflect the switchover
status of the redundant port pair:
other(1)..............not undergoing switchover
timedSwitchover(2)....port is undergoing timed switchover
(see value of
s5EnRedPortSwitchoverTime).
On GETs with switchover status of timedSwitchover(2),
if the time remaining before the completion of the
switchover and reversal is available, it will be reported
in object s5EnRedPortSwitchoverTime as a positive value
If not available, the value of s5EnRedSwitchoverTime will
be zero. When changing a port to timedSwitchover(2), the
SET request must also contain the value for object
s5EnRedSwitchoverTime.
Parsed from file S5-ETH-REDUNDANT-LINKS-MIB.mib
Module: S5-ETH-REDUNDANT-LINKS-MIB
Vendor: SynOptics
Module: S5-ETH-REDUNDANT-LINKS-MIB
[Automatically extracted from oidview.com]
s5EnRedPortSwitchoverStatus OBJECT-TYPE SYNTAX INTEGER { other(1), timedSwitchover(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The switchover status of the port (and its companion). The following values can be written: timedSwitchover(2)...cause a timed switchover (see value of s5EnRedPortSwitchoverTime) The following values reflect the switchover status of the redundant port pair: other(1)..............not undergoing switchover timedSwitchover(2)....port is undergoing timed switchover (see value of s5EnRedPortSwitchoverTime). On GETs with switchover status of timedSwitchover(2), if the time remaining before the completion of the switchover and reversal is available, it will be reported in object s5EnRedPortSwitchoverTime as a positive value If not available, the value of s5EnRedSwitchoverTime will be zero. When changing a port to timedSwitchover(2), the SET request must also contain the value for object s5EnRedSwitchoverTime." ::= { s5EnRedPortEntry 13 }
s5EnRedPortSwitchoverStatus OBJECT-TYPE SYNTAX INTEGER { other(1), timedSwitchover(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The switchover status of the port (and its companion). The following values can be written: timedSwitchover(2)...cause a timed switchover (see value of s5EnRedPortSwitchoverTime) The following values reflect the switchover status of the redundant port pair: other(1)..............not undergoing switchover timedSwitchover(2)....port is undergoing timed switchover (see value of s5EnRedPortSwitchoverTime). On GETs with switchover status of timedSwitchover(2), if the time remaining before the completion of the switchover and reversal is available, it will be reported in object s5EnRedPortSwitchoverTime as a positive value If not available, the value of s5EnRedSwitchoverTime will be zero. When changing a port to timedSwitchover(2), the SET request must also contain the value for object s5EnRedSwitchoverTime." ::= { s5EnRedPortEntry 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.6.1.2.1.1.1 | s5EnRedPortBrdIndx | 0 | 0 | The index of the slot containing the board on which the port is located. |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.2 | s5EnRedPortPortIndx | 0 | 0 | The index of the port on the board. |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.3 | s5EnRedPortCapability | 0 | 0 | The redundancy capability of the port: hwRedOnly(1).....hardware redundancy only. swRedOnly(2).....software redundacy only. hwAndS… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.4 | s5EnRedPortRedundMode | 0 | 0 | The redundancy mode of the port. The values when written change the redundancy mode, and when read report the redundancy mode: sta… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.5 | s5EnRedPortOperStatus | 0 | 0 | The redundancy status of the port. The values are: other(1).............none of the following. ok(2)...................no fault lo… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.6 | s5EnRedPortRemoteOperStatus | 0 | 0 | This object reflects the real time status of the received data from the remote port. The values are: snpxFLRemFltCpblPortUp(1)...… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.7 | s5EnRedPortRemFltSelectMode | 0 | 0 | This mode specifies the set of local fault events which will cause a switchover. The values are: synoptics(1)..The SynOptics Tx R… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.8 | s5EnRedPortTxMode | 0 | 0 | The Transmit Fiber Mode, which determines the port transmit idle. The values are: autoCfg(1)...The port will auto configure based… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.9 | s5EnRedPortFaults | 0 | 0 | A count of local or remote faults on this port. This counter increments on a transition between the fault and no-fault states. |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.10 | s5EnRedPortModeChanges | 0 | 0 | A count of the number of times this port has transitioned from standby mode to non-standby mode (includes active mode and standal… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.11 | s5EnRedPortCompanionBrdNum | 0 | 0 | The index of the slot containing the board of the other port in the redundant pair. If the port (whose slot-port identity is give… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.12 | s5EnRedPortCompanionPortNum | 0 | 0 | The index of the other port in the redundant pair. If the port (whose slot-port identity is given by the instance) is hardware-re… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.14 | s5EnRedPortSwitchoverTime | 0 | 0 | The length of time between switching over a redundant port pair and switching back, when a timed switchover is done to the port. … |