The Transmit Fiber Mode, which determines the
port transmit idle. The values are:
autoCfg(1)...The port will auto configure based
upon the received idle.
fl(2)........The port is configured in FL mode.
fb(3)........The port is configured in FB mode.
other(4).....None of the above. The port is not a fiber
port.
The value other(4) is read-only.
Parsed from file S5erl102.mib.txt
Company: None
Module: S5-ETH-REDUNDANT-LINKS-MIB
The Transmit Fiber Mode, which determines the
port transmit idle. The values are:
autoCfg(1)...The port will auto configure based
upon the received idle.
fl(2)........The port is configured in FL mode.
fb(3)........The port is configured in FB mode.
other(4).....None of the above. The port is not a fiber
port.
The value other(4) is read-only.
Parsed from file S5-ETH-REDUNDANT-LINKS-MIB.mib
Module: S5-ETH-REDUNDANT-LINKS-MIB
Vendor: SynOptics
Module: S5-ETH-REDUNDANT-LINKS-MIB
[Automatically extracted from oidview.com]
s5EnRedPortTxMode OBJECT-TYPE SYNTAX INTEGER { autoCfg(1), fl(2), fb(3), other(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The Transmit Fiber Mode, which determines the port transmit idle. The values are: autoCfg(1)...The port will auto configure based upon the received idle. fl(2)........The port is configured in FL mode. fb(3)........The port is configured in FB mode. other(4).....None of the above. The port is not a fiber port. The value other(4) is read-only." ::= { s5EnRedPortEntry 8 }
s5EnRedPortTxMode OBJECT-TYPE SYNTAX INTEGER { autoCfg(1), fl(2), fb(3), other(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The Transmit Fiber Mode, which determines the port transmit idle. The values are: autoCfg(1)...The port will auto configure based upon the received idle. fl(2)........The port is configured in FL mode. fb(3)........The port is configured in FB mode. other(4).....None of the above. The port is not a fiber port. The value other(4) is read-only." ::= { s5EnRedPortEntry 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.6.1.2.1.1.1 | s5EnRedPortBrdIndx | 0 | 0 | The index of the slot containing the board on which the port is located. |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.2 | s5EnRedPortPortIndx | 0 | 0 | The index of the port on the board. |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.3 | s5EnRedPortCapability | 0 | 0 | The redundancy capability of the port: hwRedOnly(1).....hardware redundancy only. swRedOnly(2).....software redundacy only. hwAndS… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.4 | s5EnRedPortRedundMode | 0 | 0 | The redundancy mode of the port. The values when written change the redundancy mode, and when read report the redundancy mode: sta… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.5 | s5EnRedPortOperStatus | 0 | 0 | The redundancy status of the port. The values are: other(1).............none of the following. ok(2)...................no fault lo… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.6 | s5EnRedPortRemoteOperStatus | 0 | 0 | This object reflects the real time status of the received data from the remote port. The values are: snpxFLRemFltCpblPortUp(1)...… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.7 | s5EnRedPortRemFltSelectMode | 0 | 0 | This mode specifies the set of local fault events which will cause a switchover. The values are: synoptics(1)..The SynOptics Tx R… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.9 | s5EnRedPortFaults | 0 | 0 | A count of local or remote faults on this port. This counter increments on a transition between the fault and no-fault states. |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.10 | s5EnRedPortModeChanges | 0 | 0 | A count of the number of times this port has transitioned from standby mode to non-standby mode (includes active mode and standal… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.11 | s5EnRedPortCompanionBrdNum | 0 | 0 | The index of the slot containing the board of the other port in the redundant pair. If the port (whose slot-port identity is give… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.12 | s5EnRedPortCompanionPortNum | 0 | 0 | The index of the other port in the redundant pair. If the port (whose slot-port identity is given by the instance) is hardware-re… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.13 | s5EnRedPortSwitchoverStatus | 0 | 0 | The switchover status of the port (and its companion). The following values can be written: timedSwitchover(2)...cause a timed sw… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.14 | s5EnRedPortSwitchoverTime | 0 | 0 | The length of time between switching over a redundant port pair and switching back, when a timed switchover is done to the port. … |