Vendor: Tylink
Module: TY3250I-MIB
[Automatically extracted from oidview.com]
ty3250CfgT1Table OBJECT IDENTIFIER ::= { ty3250 3 }
ty3250CfgT1Table OBJECT IDENTIFIER ::= { ty3250 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.466.4.3.1 | ty3250CfgT1Framing | 1 | 1 | Type of Framing on this T1 Line. Check with your service provider to determine value. D4 is also known as 'SuperFrame', ESF is … |
1.3.6.1.4.1.466.4.3.2 | ty3250CfgT1LineEncoding | 1 | 1 | T1 interface bipolar encoding scheme. Check with your service provider to determine value. B8ZS, which inherently provides ample… |
1.3.6.1.4.1.466.4.3.3 | ty3250CfgT1Density | 1 | 1 | CSU 'ones density' monitor. Defines the maximum number of consecutive zeros that can be transmitted to the network. If density mo… |
1.3.6.1.4.1.466.4.3.4 | ty3250CfgT1Interface | 1 | 1 | Enables CSU-specific functions if CSU (1) is selected. CSU functions include Line Build-out, density monitoring, and certain diag… |
1.3.6.1.4.1.466.4.3.5 | ty3250CfgT1LboSetting | 1 | 1 | CSU Line Build Out. Consult service provider for proper setting; either 0dB (1), -7.5dB (2), or -15dB (3). Not applicable if T1In… |
1.3.6.1.4.1.466.4.3.6 | ty3250CfgT1Timing | 1 | 1 | T1 network interface timing source. There must be only one source on a T1 line. Node should typically be network (2) timed on a… |
1.3.6.1.4.1.466.4.3.7 | ty3250CfgT1CicuitID | 1 | 1 | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.466.4.0 | ty3250Trap | 0 | 0 | None |
1.3.6.1.4.1.466.4.1 | ty3250coldstart, ty3250SysTable | 8 | 16 | None |
1.3.6.1.4.1.466.4.2 | ty3250authentication | 0 | 0 | None |
1.3.6.1.4.1.466.4.4 | ty3250CfgDteTable | 6 | 12 | None |
1.3.6.1.4.1.466.4.5 | ty3250CfgConnectTable | 3 | 39 | None |
1.3.6.1.4.1.466.4.6 | ty3250CfgCommTable | 2 | 16 | None |
1.3.6.1.4.1.466.4.7 | ty3250t1netwredalarmdeclare, ty3250CfgSnmpTable | 1 | 3 | IP addresses and corresponding trap filters. |
1.3.6.1.4.1.466.4.8 | ty3250t1netwredalarmclear | 0 | 0 | None |
1.3.6.1.4.1.466.4.9 | ty3250t1netwyellowalarmdetect | 0 | 0 | None |
1.3.6.1.4.1.466.4.10 | ty3250t1netwyellowalarmclear, ty3250DiagT1Table | 5 | 10 | None |
1.3.6.1.4.1.466.4.11 | ty3250DiagDteTable | 3 | 6 | None |
1.3.6.1.4.1.466.4.12 | ty3250DiagBerTable | 5 | 10 | None |
1.3.6.1.4.1.466.4.13 | ty3250t1controlledslip, ty3250PortStatusTable | 1 | 6 | Status of a T1 or DTE port. |
1.3.6.1.4.1.466.4.14 | ty3250PerfT1CurrentTable | 1 | 11 | ty3250Perft1CurrentTable |
1.3.6.1.4.1.466.4.15 | ty3250PerfT1IntervalTable | 1 | 10 | The DS1 Interval table. |
1.3.6.1.4.1.466.4.16 | ty3250PerfT1TotalTable | 1 | 9 | ty3250Perft1TotalTable |
1.3.6.1.4.1.466.4.17 | ty3250T1PerfCmdTypeTable | 1 | 5 | An entry in the DS1 Interval table. |
1.3.6.1.4.1.466.4.18 | ty3250AlarmType | 1 | 1 | The type of alarms that are generated on the node |