Vendor: Emerson Computer PowerRoger Draper
Module: LIEBERT-GP-CONDITIONS-MIB
[Automatically extracted from oidview.com]
lgpConditionsWellKnown OBJECT IDENTIFIER ::= { lgpConditions 1 }
lgpConditionsWellKnown OBJECT IDENTIFIER ::= { lgpConditions 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.476.1.42.3.2.1.1 | lgpConditionHighTemperature | 0 | 0 | lgpConditionHightemperature |
1.3.6.1.4.1.476.1.42.3.2.1.2 | lgpConditionLowTemperature | 0 | 0 | The temperature is below the low temperature threshold. |
1.3.6.1.4.1.476.1.42.3.2.1.3 | lgpConditionHighHumidity | 0 | 0 | The humidity has exceeded the high humidity threshold. |
1.3.6.1.4.1.476.1.42.3.2.1.4 | lgpConditionLowHumidity | 0 | 0 | The humidity is below the low humidity threshold. |
1.3.6.1.4.1.476.1.42.3.2.1.5 | lgpConditionLossOfAirflow | 3 | 3 | The system has detected a loss of air flow. |
1.3.6.1.4.1.476.1.42.3.2.1.6 | lgpConditionChangeFilter | 0 | 0 | The system has detected a condition indicating the air filter should be changed. |
1.3.6.1.4.1.476.1.42.3.2.1.7 | lgpConditionCompressorHighHeadPressure | 4 | 4 | This system has detected an excessive head pressure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.8 | lgpConditionCompressorOverload | 2 | 2 | This system has detected a compressor overload condition. |
1.3.6.1.4.1.476.1.42.3.2.1.9 | lgpConditionCompressorShortCycle | 2 | 2 | A compressor has exceeded the maximum number of starts in a minimum time period. |
1.3.6.1.4.1.476.1.42.3.2.1.10 | lgpConditionCompressorLowSuctionPressure | 0 | 0 | The pressure at a compressor inlet has dropped below the minimum setting. |
1.3.6.1.4.1.476.1.42.3.2.1.11 | lgpConditionMainFanOverLoad | 0 | 0 | The system has detected a main fan overload condition. |
1.3.6.1.4.1.476.1.42.3.2.1.12 | lgpConditionManualOverride | 0 | 0 | The system has detected a manual override condition. |
1.3.6.1.4.1.476.1.42.3.2.1.13 | lgpConditionStandbyGlycoolPumpOn | 0 | 0 | The standby Glycol or Glycool pump is activated. |
1.3.6.1.4.1.476.1.42.3.2.1.14 | lgpConditionWaterUnderFloor | 0 | 0 | Moisture has been detected under the floor. |
1.3.6.1.4.1.476.1.42.3.2.1.15 | lgpConditionHumidifierProblem | 0 | 0 | The system has detected a humidifier problem. |
1.3.6.1.4.1.476.1.42.3.2.1.16 | lgpConditionLowWaterInHumidifier | 0 | 0 | The system has detected a low water condition in the humidifier reservoir. |
1.3.6.1.4.1.476.1.42.3.2.1.17 | lgpConditionSmokeDetected | 0 | 0 | The system has detected smoke. |
1.3.6.1.4.1.476.1.42.3.2.1.18 | lgpConditionLowWaterFlow | 0 | 0 | The system has detected a low water flow rate condition. |
1.3.6.1.4.1.476.1.42.3.2.1.19 | lgpConditionLostPower | 0 | 0 | The system has lost power before being switched off using the controls. This condition is activated when power is restored. |
1.3.6.1.4.1.476.1.42.3.2.1.20 | lgpGeneralFault | 0 | 0 | A fault condition has been detected that is not identifed in the well known list. |
1.3.6.1.4.1.476.1.42.3.2.1.21 | lgpConditionLocalAlarm | 8 | 8 | This system has detected a local, or customer, alarm condition. |
1.3.6.1.4.1.476.1.42.3.2.1.22 | lgpConditionStandbyUnitOn | 0 | 0 | The system has detected the standby unit is operating. |
1.3.6.1.4.1.476.1.42.3.2.1.23 | lgpConditionCompressorLowPressure | 4 | 4 | This system has detected a low head compressor condition. |
1.3.6.1.4.1.476.1.42.3.2.1.24 | lgpConditionHighWaterInPan | 0 | 0 | The system has detected a high water condition in the condenser pan. |
1.3.6.1.4.1.476.1.42.3.2.1.25 | lgpConditionFaultySensor | 0 | 0 | The system has detected a faulty temperature/humidity sensor. |
1.3.6.1.4.1.476.1.42.3.2.1.26 | lgpConditionServiceCooling | 0 | 0 | The Cooling system requires scheduled maintenance. |
1.3.6.1.4.1.476.1.42.3.2.1.27 | lgpConditionServiceHumidifier | 0 | 0 | The Humidifier requires scheduled maintenance. |
1.3.6.1.4.1.476.1.42.3.2.1.28 | lgpConditionSystemControlBatteryLow | 0 | 0 | Charge level of the system control's battery is below the alarm set point. |
1.3.6.1.4.1.476.1.42.3.2.1.29 | lgpConditionGroundSystemFault | 0 | 0 | The system has detected a ground system fault. |
1.3.6.1.4.1.476.1.42.3.2.1.30 | lgpConditionGroundFailure | 0 | 0 | The system has detected a ground failure. |
1.3.6.1.4.1.476.1.42.3.2.1.31 | lgpConditionSecurityBreach | 0 | 0 | The system has detected a security breach. |
1.3.6.1.4.1.476.1.42.3.2.1.32 | lgpConditionEmergencyShutdown | 0 | 0 | The system has detected an emergency shutdown condition. The System is shutting down as a result of this emergency. |
1.3.6.1.4.1.476.1.42.3.2.1.33 | lgpConditionOnBypass | 6 | 6 | This system has detected the load is being powered by a bypass source. |
1.3.6.1.4.1.476.1.42.3.2.1.34 | lgpConditionOutputToLoadVoltTHD | 0 | 0 | The total harmonic distortion of the output voltage has exceeded a pre-determined threshold for a device, or system, defined amo… |
1.3.6.1.4.1.476.1.42.3.2.1.35 | lgpConditionLogicFailure | 0 | 0 | The system has detected a control logic failure. |
1.3.6.1.4.1.476.1.42.3.2.1.36 | lgpConditionPowerSupplyFault | 2 | 2 | This system had detected a power supply fault condition. |
1.3.6.1.4.1.476.1.42.3.2.1.37 | lgpConditionPowerSupplyFailure | 6 | 6 | This system has detected a power supply failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.38 | lgpConditionOverVoltage | 8 | 12 | This system has detected an over voltage condition. |
1.3.6.1.4.1.476.1.42.3.2.1.39 | lgpConditionUnderVoltage | 10 | 14 | This system has detected an under voltage condition. |
1.3.6.1.4.1.476.1.42.3.2.1.40 | lgpConditionOverload | 8 | 11 | This system has detected an overload condition. |
1.3.6.1.4.1.476.1.42.3.2.1.41 | lgpConditionScrShort | 4 | 4 | This system has detected a Silicon Controlled Rectifier (SCR) short condition. |
1.3.6.1.4.1.476.1.42.3.2.1.42 | lgpConditionScrOpen | 3 | 3 | This system has detected a Silicon Controlled Rectifier (SCR) open condition. |
1.3.6.1.4.1.476.1.42.3.2.1.43 | lgpConditionFanFailure | 3 | 3 | This system has detected a fan failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.44 | lgpConditionTransferInhibited | 0 | 0 | The system is preventing a transfer of the load to the alternate source. |
1.3.6.1.4.1.476.1.42.3.2.1.45 | lgpConditionAutoReTransferPrimed | 0 | 0 | The system is capable to retransfer to the preferred source. |
1.3.6.1.4.1.476.1.42.3.2.1.46 | lgpConditionSourcesOutOfSync | 0 | 0 | The system has detected that the input sources are not within the specified phase difference (synchronization window). |
1.3.6.1.4.1.476.1.42.3.2.1.47 | lgpConditionSourceFailure | 2 | 2 | This system has detected an input source failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.48 | lgpConditionAutoReTransferInhibited | 0 | 0 | The system is preventing a transfer of the load back to the prefered source. |
1.3.6.1.4.1.476.1.42.3.2.1.49 | lgpConditionAutoReTransferFailed | 0 | 0 | The system is failing to automatically retransfer the load back to the preferred source. |
1.3.6.1.4.1.476.1.42.3.2.1.50 | lgpConditionFuseOpen | 6 | 6 | This system has detected an open fuse condition. |
1.3.6.1.4.1.476.1.42.3.2.1.51 | lgpConditionDisconnect | 16 | 24 | The system has detected a disconnect condition. |
1.3.6.1.4.1.476.1.42.3.2.1.52 | lgpConditionFrequencyDeviation | 5 | 5 | This system has detected a frequency deviation condition. The frequency of a source is outside of the pre-determined thresholds f… |
1.3.6.1.4.1.476.1.42.3.2.1.53 | lgpConditionOverCurrent | 10 | 16 | This system has detected an current condition. The current of a source has risen above a pre-determined threshold for a device,… |
1.3.6.1.4.1.476.1.42.3.2.1.54 | lgpConditionSensorFailure | 17 | 17 | This system has detected a sensor failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.55 | lgpConditionInternalCommunicationFailure | 0 | 0 | This system has detected an internal communication failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.56 | lgpConditionExternalCommunicationFailure | 0 | 0 | This system has detected an external communication failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.57 | lgpConditionSourceGateDriveFailure | 2 | 2 | This system has detected a source gate drive failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.58 | lgpConditionDisconnectFailure | 5 | 5 | This system has detected a disconnect failure condition. A disconnect is a device which disconnects a conductor of a circuit from… |
1.3.6.1.4.1.476.1.42.3.2.1.59 | lgpConditionOverTemperature | 16 | 16 | This system has detected an over temperature condition. |
1.3.6.1.4.1.476.1.42.3.2.1.60 | lgpConditionLoadOnAlternateSource | 0 | 0 | The system has detected that the load is being supplied by the alternate source. |
1.3.6.1.4.1.476.1.42.3.2.1.61 | lgpConditionPhaseRotationError | 4 | 4 | This system has detected a phase rotation error condition. |
1.3.6.1.4.1.476.1.42.3.2.1.62 | lgpConditionControlModuleFailure | 1 | 1 | This system has detected a control module failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.63 | lgpConditionHistoryLogFull | 0 | 0 | The system has detected the history log is full. |
1.3.6.1.4.1.476.1.42.3.2.1.64 | lgpConditionConfigurationModified | 0 | 0 | The system has detected the configuration has been modified. |
1.3.6.1.4.1.476.1.42.3.2.1.65 | lgpConditionPasswordModified | 0 | 0 | The system has detected the password has been modified. |
1.3.6.1.4.1.476.1.42.3.2.1.66 | lgpConditionTimeModified | 0 | 0 | The system has detected the time has been modified. |
1.3.6.1.4.1.476.1.42.3.2.1.67 | lgpConditionDateModified | 0 | 0 | The system has detected the date has been modified. |
1.3.6.1.4.1.476.1.42.3.2.1.68 | lgpConditionEventLogCleared | 0 | 0 | The system has detected the event log has been cleared. |
1.3.6.1.4.1.476.1.42.3.2.1.69 | lgpConditionHistoryLogCleared | 0 | 0 | The system has detected the history log has been cleared. |
1.3.6.1.4.1.476.1.42.3.2.1.70 | lgpConditionUtilityFailure | 0 | 0 | The system has detected a utility failure. |
1.3.6.1.4.1.476.1.42.3.2.1.71 | lgpConditionBatteryTestInProgress | 0 | 0 | The system is performing a battery test at this time. |
1.3.6.1.4.1.476.1.42.3.2.1.72 | lgpConditionLoadOnBattery | 0 | 0 | The system load is being supported by the battery. |
1.3.6.1.4.1.476.1.42.3.2.1.74 | lgpConditionReplaceBattery | 0 | 0 | The system has detected the batteries are due to be replaced. |
1.3.6.1.4.1.476.1.42.3.2.1.75 | lgpConditionUpsShutdownPending | 0 | 0 | The system is in a shutdown pending condition. |
1.3.6.1.4.1.476.1.42.3.2.1.76 | lgpConditionBatteryChargerFailed | 0 | 0 | The system has detected the battery charger has failed. |
1.3.6.1.4.1.476.1.42.3.2.1.77 | lgpConditionBypassVoltageUnqualified | 0 | 0 | The system has detected the bypass voltage is unqualified. The voltage measurement is outside a pre-determined threshold range f… |
1.3.6.1.4.1.476.1.42.3.2.1.78 | lgpConditionCheckAirFilter | 0 | 0 | The system has detected it is time to check the air filter. |
1.3.6.1.4.1.476.1.42.3.2.1.79 | lgpConditionBrownOut | 0 | 0 | The system has detected a brown out condition. |
1.3.6.1.4.1.476.1.42.3.2.1.80 | lgpConditionMultipleTransferLockout | 0 | 0 | The system has locked out transfers to bypass. Too many transfers have occured over a specified amount of time. |
1.3.6.1.4.1.476.1.42.3.2.1.81 | lgpConditionBypassPhaseLost | 0 | 0 | The system has detected one or more bypass phases are missing. |
1.3.6.1.4.1.476.1.42.3.2.1.82 | lgpConditionMaintenceBypassInhibited | 0 | 0 | The system is preventing a transfer of the load to maintence bypass. |
1.3.6.1.4.1.476.1.42.3.2.1.83 | lgpConditionLoadLockedOnBypass | 0 | 0 | The system has detected an error and been put locked on bypass. |
1.3.6.1.4.1.476.1.42.3.2.1.84 | lgpConditionOutputToLoadShort | 0 | 0 | The system has detected an output to load short circuit condition. |
1.3.6.1.4.1.476.1.42.3.2.1.85 | lgpConditionEmergencyTransferToInverter | 0 | 0 | The system has detected an emergency transfer of the load to inverter. |
1.3.6.1.4.1.476.1.42.3.2.1.86 | lgpConditonEmergencyPowerOff | 0 | 0 | The system has detected an Emergency Power Off (EPO) condition. An external EPO switch has cut off the power source to the syste… |
1.3.6.1.4.1.476.1.42.3.2.1.87 | lgpConditionInverterBackFeed | 0 | 0 | The system has detected an inverter backfeed condition. The inverter is feeding power through the bypass back to the input. |
1.3.6.1.4.1.476.1.42.3.2.1.88 | lgpConditionDcGroundFault | 2 | 2 | The system has detected a DC ground fault. |
1.3.6.1.4.1.476.1.42.3.2.1.89 | lgpConditionStaticTransferSwitchInhibited | 0 | 0 | None |
1.3.6.1.4.1.476.1.42.3.2.1.90 | lgpConditionBatteryLogFullWarning | 0 | 0 | None |
1.3.6.1.4.1.476.1.42.3.2.1.91 | lgpConditionInputCurrentUnbalanced | 0 | 0 | None |
1.3.6.1.4.1.476.1.42.3.2.1.92 | lgpConditionSelfTestFailed | 0 | 0 | lgpConditionSelftestFailed |
1.3.6.1.4.1.476.1.42.3.2.1.93 | lgpConditionInverterOutOfSynchronization | 0 | 0 | None |
1.3.6.1.4.1.476.1.42.3.2.1.94 | lgpConditionModuleAlarm | 8 | 8 | This system has detected an alarm within the multi-module system. |
1.3.6.1.4.1.476.1.42.3.2.1.95 | lgpConditionActiveModuleAlarm | 0 | 0 | The system has detected an active alarm in one, or more, of the sub-modules of the multi-module system. |
1.3.6.1.4.1.476.1.42.3.2.1.96 | lgpConditionControlFailure | 4 | 4 | This system has detected a control failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.97 | lgpConditionControlWarning | 2 | 2 | This system has detected a control warning conditions. |
1.3.6.1.4.1.476.1.42.3.2.1.98 | lgpConditionUserInterfaceFailure | 0 | 0 | The system has detected a user interface control failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.99 | lgpConditionLostPowerRedundancy | 0 | 0 | The system has detected the number of redundant power modules has fallen below the minimum redundant power module setting. |
1.3.6.1.4.1.476.1.42.3.2.1.100 | lgpConditionPowerModuleFailure | 0 | 0 | The system has detected a power module failure condition in the system. |
1.3.6.1.4.1.476.1.42.3.2.1.101 | lgpConditionBatteryModuleFailure | 0 | 0 | The system has detected a battery module failure condition in the system. |
1.3.6.1.4.1.476.1.42.3.2.1.102 | lgpConditionOutputToLoadOff | 0 | 0 | The system has detected that there is no power being supplied to the load. |
1.3.6.1.4.1.476.1.42.3.2.1.103 | lgpConditionSystemOff | 0 | 0 | The system is off. |
1.3.6.1.4.1.476.1.42.3.2.1.104 | lgpConditionRectifierStartupFailure | 0 | 0 | The system has detected a rectifier under voltage start-up failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.105 | lgpConditionRectifierFault | 0 | 0 | The system has detected a rectifier fault condition. |
1.3.6.1.4.1.476.1.42.3.2.1.106 | lgpConditionInverterShutdownLowDc | 0 | 0 | The system has shutdown the inverter due to a DC bus under voltage. |
1.3.6.1.4.1.476.1.42.3.2.1.107 | lgpConditionInverterFault | 0 | 0 | The system has detected an inverter fault condition. |
1.3.6.1.4.1.476.1.42.3.2.1.108 | lgpConditionInverterDcOffsetOverrun | 0 | 0 | The system has detected an over run of the inverter DC offset voltage. |
1.3.6.1.4.1.476.1.42.3.2.1.109 | lgpConditionParallelSysLowBatteryWarning | 0 | 0 | The parallel system has detected a low battery warning condition. |
1.3.6.1.4.1.476.1.42.3.2.1.110 | lgpConditionParallelSysLoadShareFault | 0 | 0 | The parallel system has detected a load share fault condition. |
1.3.6.1.4.1.476.1.42.3.2.1.111 | lgpConditionBatteryFault | 0 | 0 | The system has detected a battery fault condition. The battery conductors are either reversed or disconnected. |
1.3.6.1.4.1.476.1.42.3.2.1.112 | lgpConditionBatteryConverterFailure | 0 | 0 | The system has detected a battery converter failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.113 | lgpConditionBatteryBalancerFault | 0 | 0 | The system has detected a battery balancer fault condition. |
1.3.6.1.4.1.476.1.42.3.2.1.114 | lgpConditionpsUpsOperationFault | 0 | 0 | The system has detected an operation fault. The UPS attempted to transfer to maintenance bypass without following the proper se… |
1.3.6.1.4.1.476.1.42.3.2.1.115 | lgpConditionOutputToLoadOnJointMode | 0 | 0 | The system load is being supported by both the battery and rectifier. |
1.3.6.1.4.1.476.1.42.3.2.1.116 | lgpConditionInputNeutralLost | 0 | 0 | The system had detected the main input neutral is disconnected. |
1.3.6.1.4.1.476.1.42.3.2.1.117 | lgpConditionLowBatteryWarning | 0 | 0 | The battery's remaining charge is less than or equal to the configured low threshold. |
1.3.6.1.4.1.476.1.42.3.2.1.118 | lgpConditionInternalFault | 0 | 0 | The system has detected an internal fault. |
1.3.6.1.4.1.476.1.42.3.2.1.119 | lgpConditionBatteryTestFailed | 0 | 0 | The system has detected a battery self-test failure. |
1.3.6.1.4.1.476.1.42.3.2.1.120 | lgpConditionPowerModuleWarning | 0 | 0 | The system has detected an alarm condition on one, or more, power modules. |
1.3.6.1.4.1.476.1.42.3.2.1.121 | lgpConditionBatteryModuleWarning | 0 | 0 | The system has detected an alarm condition on one, or more, battery modules. |
1.3.6.1.4.1.476.1.42.3.2.1.122 | lgpConditionControlModuleWarning | 0 | 0 | The system has detected a control module warning. |
1.3.6.1.4.1.476.1.42.3.2.1.123 | lgpConditionUpsOperationFault | 0 | 0 | The system has detected an operation fault. The UPS attempted to transfer to maintenance bypass without following the proper se… |
1.3.6.1.4.1.476.1.42.3.2.1.124 | lgpConditionActiveAlarm | 0 | 0 | The system has detected an alarm condition. |
1.3.6.1.4.1.476.1.42.3.2.1.125 | lgpConditionRectifierCommunicationFailure | 0 | 0 | The system has detected an internal communication failure condition with the rectifier. |
1.3.6.1.4.1.476.1.42.3.2.1.126 | lgpConditionInverterCommunicationFailure | 0 | 0 | The system has detected an internal communication failure condition with the inverter. |
1.3.6.1.4.1.476.1.42.3.2.1.127 | lgpConditionParallelSysConnectionFault | 0 | 0 | The parallel system has detected a connection fault. One or more of the devices are not properly connected. |
1.3.6.1.4.1.476.1.42.3.2.1.128 | lgpConditionParallelSysCommunicationFailure | 0 | 0 | The parallel system has detected a communication failure. |
1.3.6.1.4.1.476.1.42.3.2.1.129 | lgpConditionLostBatteryRedundancy | 0 | 0 | The system has detected the number of redundant battery modules has fallen below the configured redundant battery module thresho… |
1.3.6.1.4.1.476.1.42.3.2.1.130 | lgpConditionCompPumpDownFailure | 2 | 2 | The system has detected that a compressor has failed to pump down. |
1.3.6.1.4.1.476.1.42.3.2.1.131 | lgpConditionChilledWaterLowWaterFlow | 0 | 0 | The system has detected a chilled water low water flow condition. |
1.3.6.1.4.1.476.1.42.3.2.1.132 | lgpConditionAirFilterClogged | 0 | 0 | The system has detected a air filter clogged condition. |
1.3.6.1.4.1.476.1.42.3.2.1.133 | lgpConditionHumidifierFailure | 0 | 0 | The system has detected a humidifier failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.134 | lgpConditionRunHoursExceeded | 11 | 11 | The system has detected a pre-determined run hours threshold has been exceeded. |
1.3.6.1.4.1.476.1.42.3.2.1.135 | lgpConditionCommWarning | 16 | 16 | The system has detected a loss of communications with another module. |
1.3.6.1.4.1.476.1.42.3.2.1.136 | lgpConditionUnitOn | 0 | 0 | The unit is on. |
1.3.6.1.4.1.476.1.42.3.2.1.137 | lgpConditionUnitOff | 0 | 0 | The unit is off. |
1.3.6.1.4.1.476.1.42.3.2.1.138 | lgpConditionSleepModeOff | 0 | 0 | The system sleep mode operation has been turned off. |
1.3.6.1.4.1.476.1.42.3.2.1.139 | lgpConditionPowerOn | 0 | 0 | The system power is on. |
1.3.6.1.4.1.476.1.42.3.2.1.140 | lgpConditionSystemOnStanby | 0 | 0 | The system is on standby. |
1.3.6.1.4.1.476.1.42.3.2.1.141 | lgpConditionPowerOff | 0 | 0 | The system power is off. |
1.3.6.1.4.1.476.1.42.3.2.1.142 | lgpConditionHighTemperatureGroup | 5 | 5 | lgpConditionHightemperatureGroup |
1.3.6.1.4.1.476.1.42.3.2.1.143 | lgpConditionLowTemperatureGroup | 2 | 2 | The system has detected a low temperature condition. This group contains various low temperature conditions. |
1.3.6.1.4.1.476.1.42.3.2.1.144 | lgpConditionHighHumidityGroup | 1 | 1 | The system has detected a high humidity condition. This group contains various high humidity conditions. |
1.3.6.1.4.1.476.1.42.3.2.1.145 | lgpConditionLowHumidityGroup | 1 | 1 | The system has detected a low humidity condition. This group contains various high humidity conditions. |
1.3.6.1.4.1.476.1.42.3.2.1.146 | lgpConditionPeerNetworkNoMaster | 0 | 0 | The system is unable to communicate with the master on the peer to peer network. |
1.3.6.1.4.1.476.1.42.3.2.1.147 | lgpConditionNoOnOffPermissions | 0 | 0 | The system lacks the permissions to execute the on/off operation. |
1.3.6.1.4.1.476.1.42.3.2.1.148 | lgpConditionPeerNetworkFailure | 0 | 0 | The system has detected a communication failure on the peer to peer network. |
1.3.6.1.4.1.476.1.42.3.2.1.149 | lgpConditionUnitDisabled | 0 | 0 | The unit is disabled. |
1.3.6.1.4.1.476.1.42.3.2.1.150 | lgpConditionUnitShutdown | 0 | 0 | The system has shutdown. |
1.3.6.1.4.1.476.1.42.3.2.1.151 | lgpConditionPeerNetworkDiscovered | 0 | 0 | The system has established communications on the peer to peer network. |
1.3.6.1.4.1.476.1.42.3.2.1.152 | lgpConditionLossOfWaterFlow | 0 | 0 | The system has detected a loss of water flow condition. |
1.3.6.1.4.1.476.1.42.3.2.1.153 | lgpConditionCondensatePumpHighWater | 0 | 0 | The system has detected high water in the condensate pump. |
1.3.6.1.4.1.476.1.42.3.2.1.154 | lgpConditionGeneralAlarm | 0 | 0 | The system has detected a general alarm condition. |
1.3.6.1.4.1.476.1.42.3.2.1.155 | lgpConditionProductSpecific | 0 | 0 | The system has detected a product specific condition. This condition is not currently available via the agent card. |
1.3.6.1.4.1.476.1.42.3.2.1.156 | lgpConditionReheatLockout | 0 | 0 | The system has locked out the electrical reheat operation for a specified amount of time. |
1.3.6.1.4.1.476.1.42.3.2.1.157 | lgpConditionHumidifierLockout | 0 | 0 | The system has locked out the humidifier operation for a specified amount of time. |
1.3.6.1.4.1.476.1.42.3.2.1.158 | lgpConditionCompressorsLockout | 0 | 0 | The system has locked out compressor operation for a specified amount of time. |
1.3.6.1.4.1.476.1.42.3.2.1.159 | lgpConditionCallService | 0 | 0 | The system has detected a condition that requires a service representative be contacted. |
1.3.6.1.4.1.476.1.42.3.2.1.160 | lgpConditionLowMemoryGroup | 1 | 1 | This group contains various low memory conditions. |
1.3.6.1.4.1.476.1.42.3.2.1.161 | lgpConditionMemoryFailureGroup | 2 | 2 | This group contains various memory device failure conditions. |
1.3.6.1.4.1.476.1.42.3.2.1.162 | lgpConditionUnitCodeErrorGroup | 19 | 19 | This group contains various memory device failure conditions. |
1.3.6.1.4.1.476.1.42.3.2.1.163 | lgpConditionHighExternalDewPoint | 0 | 0 | The system has detected a high external dew point condition. The room dew point has exceeded the specified threshold. |
1.3.6.1.4.1.476.1.42.3.2.1.164 | lgpConditionHcbDisconnected | 0 | 0 | The system has detected the humidifier control board is disconnected or not installed. |
1.3.6.1.4.1.476.1.42.3.2.1.165 | lgpConditionBmsResetTimerExpired | 0 | 0 | The BMS fan speed control reset counter has timed out. |
1.3.6.1.4.1.476.1.42.3.2.1.166 | lgpConditionAgentFirmwareCorrupt | 0 | 0 | The firmware update to the agent card has failed and the firmware is now corrupt. |
1.3.6.1.4.1.476.1.42.3.2.1.175 | lgpConditionSystemAccessGroup | 2 | 2 | This group contains various system access conditions. An examples is an open access panel. |
1.3.6.1.4.1.476.1.42.3.2.1.176 | lgpConditionsDamperFailure | 1 | 1 | This group contains various damper failure conditions. |
1.3.6.1.4.1.476.1.42.3.2.1.177 | lgpConditionRemoteShutdown | 0 | 0 | A remote shutdown occurred. |
1.3.6.1.4.1.476.1.42.3.2.1.178 | lgpConditionFireAlarm | 0 | 0 | Fire Alarm. |
1.3.6.1.4.1.476.1.42.3.2.1.179 | lgpConditionHeatersOverheated | 0 | 0 | Heaters Overheated. |
1.3.6.1.4.1.476.1.42.3.2.1.180 | lgpConditionCondenserFailureGroup | 2 | 2 | This group contains condenser failure conditions. |
1.3.6.1.4.1.476.1.42.3.2.1.181 | lgpConditionHumidifierCyclinderWorn | 0 | 0 | The system has detected the humidifier cylinder is worn. |
1.3.6.1.4.1.476.1.42.3.2.1.182 | lgpConditionUnderCurrent | 2 | 2 | The system has detected a low current condition. The current of one or more sources in the system has fallen below a threshold … |
1.3.6.1.4.1.476.1.42.3.2.1.183 | lgpConditionHeatRejectorGroup | 2 | 2 | This group contains failure conditions for the heat rejection unit. |
1.3.6.1.4.1.476.1.42.3.2.1.184 | lgpConditionFreeCoolLockout | 0 | 0 | The free cooling capability has been disabled. |
1.3.6.1.4.1.476.1.42.3.2.1.185 | lgpConditionWaterLeakSensorFailure | 0 | 0 | The sensor used to detect water leaks is not connected or has failed. |
1.3.6.1.4.1.476.1.42.3.2.1.186 | lgpConditionNoLoadDetectedWarning | 0 | 0 | There is no load detected on the output. This can be an indication that the output is being powered by an external bypass sourc… |
1.3.6.1.4.1.476.1.42.3.2.1.187 | lgpConditionFirmwareGroup | 1 | 1 | Grouping level for firmware related conditions. |
1.3.6.1.4.1.476.1.42.3.2.1.188 | lgpConditionTestGroup | 1 | 1 | Objects in this group of conditions are related to testing or test events. This object is never active. |
1.3.6.1.4.1.476.1.42.3.2.1.190 | lgpConditionReceptacleBranchGroup | 2 | 2 | Grouping level for receptacle branch conditions. |
1.3.6.1.4.1.476.1.42.3.2.1.192 | lgpConditionInputUnqualified | 0 | 0 | The input is not qualified to provide power to the system. This may be due to system input over-voltage, system input under-vol… |
1.3.6.1.4.1.476.1.42.3.2.1.193 | lgpConditionBypassUnavailable | 0 | 0 | This summary event is asserted when the bypass is not available. Possible causes include: Bypass Sync Error, Bypass Line Fail, B… |
1.3.6.1.4.1.476.1.42.3.2.1.194 | lgpConditionAutoTransferFailed | 0 | 0 | The system is failing to automatically transfer the load to the alternate source. |
1.3.6.1.4.1.476.1.42.3.2.1.195 | lgpConditionSBSUnavailable | 0 | 0 | A Static Bypass Switch (SBS) Failure has been detected. Possible causes include: SBS Phase Open, SBS SCR (Silicon Controlled Rec… |
1.3.6.1.4.1.476.1.42.3.2.1.196 | lgpConditionSBSOverload | 0 | 0 | On at least one phase of the static bypass switch (SBS), the power dissapation limit has been exceeded. |
1.3.6.1.4.1.476.1.42.3.2.1.197 | lgpConditionExcessPulseParallel | 0 | 0 | The system has performed too many pulse parallel operations within the specified time interval. A pulse parallel operation is a… |
1.3.6.1.4.1.476.1.42.3.2.1.198 | lgpConditionRemoteBypassSwitchOffExt | 0 | 0 | The static bypass switch is off due to the state of an external signal. |
1.3.6.1.4.1.476.1.42.3.2.1.199 | lgpConditionManTransferInhibited | 0 | 0 | Manual transfer from inverter to bypass is inhibited. Bypass is not qualified. |
1.3.6.1.4.1.476.1.42.3.2.1.200 | lgpConditionManReTransferInhibited | 0 | 0 | Manual retransfer from bypass to inverter is inhibited. |
1.3.6.1.4.1.476.1.42.3.2.1.201 | lgpConditionBatteryChargeError | 0 | 0 | The battery is not charging properly. Some reasons for this condition include, but are not limited to: battery charger failure, b… |
1.3.6.1.4.1.476.1.42.3.2.1.202 | lgpConditionBatteryAutoTestInhibited | 0 | 0 | Automatic (scheduled) battery tests are inhibited. |
1.3.6.1.4.1.476.1.42.3.2.1.203 | lgpConditionBatteryChargeReducedExt | 0 | 0 | A reduced battery charging algorithm is being used due to an external signal. |
1.3.6.1.4.1.476.1.42.3.2.1.204 | lgpConditionBatteryCapacityLow | 0 | 0 | The battery capacity is low. Some reasons for this condition include, but are not limited to: a battery is offline, the battery … |
1.3.6.1.4.1.476.1.42.3.2.1.205 | lgpConditionBatteryTempImbalance | 0 | 0 | The temperature difference between two batteries in the system exceeds the predefined threshold. |
1.3.6.1.4.1.476.1.42.3.2.1.206 | lgpConditionBatteryEqualize | 0 | 0 | The rectifier output voltage has been increased to equalize the battery voltage level. |
1.3.6.1.4.1.476.1.42.3.2.1.207 | lgpConditionBatteryChargeInhibitedExt | 0 | 0 | Battery charging is inhibited due to an external inhibit signal. |
1.3.6.1.4.1.476.1.42.3.2.1.208 | lgpConditionServiceExtBatteryMonitorGroup | 2 | 2 | This group contains battery monitor service conditions. |
1.3.6.1.4.1.476.1.42.3.2.1.209 | lgpConditionBatteryGroundFault | 0 | 0 | Battery system ground fault amperage exceeds the threshold. |
1.3.6.1.4.1.476.1.42.3.2.1.210 | lgpConditionBatteryLowShutdown | 0 | 0 | With the battery breaker closed, the battery voltage has dropped below the calculated End-Of-Discharge (EOD) limit. |
1.3.6.1.4.1.476.1.42.3.2.1.211 | lgpConditionEmergencyPowerOffLocal | 0 | 0 | The system has detected an Emergency Power Off (EPO) condition. The local EPO switch has cut off the power source to the system. |
1.3.6.1.4.1.476.1.42.3.2.1.212 | lgpConditionOutputLowPFLagging | 0 | 0 | The system has detected a lagging output power factor below the threshold, resulting in reduced load capacity. |
1.3.6.1.4.1.476.1.42.3.2.1.213 | lgpConditionOutputLowPFLeading | 0 | 0 | The system has detected a leading output power factor below the threshold, resulting in reduced load capacity. |
1.3.6.1.4.1.476.1.42.3.2.1.214 | lgpConditionOutputToLoadFault | 0 | 0 | The system has detected an output to load fault. This could be caused by over or under voltage, or by over or under frequency. |
1.3.6.1.4.1.476.1.42.3.2.1.215 | lgpConditionInvRestartInhibitedExt | 0 | 0 | Restart of the inverter is inhibited by an external signal. |
1.3.6.1.4.1.476.1.42.3.2.1.216 | lgpConditionInverterShutdownOverload | 0 | 0 | The system has shutdown the inverter due to a sustained overload. This event does not indicate if the load has been dropped or tr… |
1.3.6.1.4.1.476.1.42.3.2.1.217 | lgpConditionInverterOffExt | 0 | 0 | The inverter is off due to the state of an external signal. |
1.3.6.1.4.1.476.1.42.3.2.1.218 | lgpConditionInputContactGroup | 16 | 16 | The system has detected an active input contact. |
1.3.6.1.4.1.476.1.42.3.2.1.219 | lgpConditionRectifierOperInhibited | 0 | 0 | None |
1.3.6.1.4.1.476.1.42.3.2.1.220 | lgpConditionBypassBackFeedBrkrOpen | 0 | 0 | The bypass backfeed breaker is in the open position. |
1.3.6.1.4.1.476.1.42.3.2.1.221 | lgpConditionAutoRestartInProgress | 0 | 0 | Auto restart is in progress. Becomes inactive when auto restart completes or fails. |
1.3.6.1.4.1.476.1.42.3.2.1.222 | lgpConditionAutoRestartInhibitedExt | 0 | 0 | Auto restart is inhibited due to an external signal. |
1.3.6.1.4.1.476.1.42.3.2.1.223 | lgpConditionAutoRestartFailed | 0 | 0 | Auto restart has failed. |
1.3.6.1.4.1.476.1.42.3.2.1.224 | lgpConditionInputOnGenerator | 0 | 0 | A generator is supplying the power to the system. |
1.3.6.1.4.1.476.1.42.3.2.1.225 | lgpConditionInputFilterCycleLock | 0 | 0 | The input filter disconnect has opened too many times within a given period of time. |
1.3.6.1.4.1.476.1.42.3.2.1.226 | lgpConditionServiceCodeActive | 0 | 0 | The system is in an operational mode intended for testing. In normal operating conditions, the system should not be in this sta… |
1.3.6.1.4.1.476.1.42.3.2.1.227 | lgpConditionLoadBusSyncActive | 0 | 0 | Load Bus Sync Operation is active. This synchronizes the UPS output with the output of another UPS. |
1.3.6.1.4.1.476.1.42.3.2.1.228 | lgpConditionLoadBusSyncInhibited | 0 | 0 | The system has detected that conditions to perform Load Bus Sync Operation are not satisfied. |
1.3.6.1.4.1.476.1.42.3.2.1.229 | lgpConditionControlsResetRequired | 0 | 0 | A controls reset is required because one or more critical settings have changed. |
1.3.6.1.4.1.476.1.42.3.2.1.230 | lgpConditionEquipTempSensorFailed | 0 | 0 | A temperature sensor is reporting a value outside the bounds of a properly operating sensor. |
1.3.6.1.4.1.476.1.42.3.2.1.231 | lgpConditionInputCurrentImbalance | 0 | 0 | The current on one input phase is much greater or lower than the average current of all the phases. This may indicate improper o… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.476.1.42.3.2.2 | lgpConditionsPresent | 1 | 1 | The present number of conditions. |
1.3.6.1.4.1.476.1.42.3.2.3 | lgpConditionsTable | 1 | 11 | A list of condition table entries. The table contains zero, one, or many rows at any moment, depending upon the number of condi… |
1.3.6.1.4.1.476.1.42.3.2.4 | lgpConditionControl | 2 | 4 | None |
1.3.6.1.4.1.476.1.42.3.2.5 | lgpConditionDescription | 1 | 1 | The ASCII text description for the condition. |
1.3.6.1.4.1.476.1.42.3.2.6 | lgpNetworkName | 1 | 1 | The network name in a node.domain.com like format. This object is intended to be used as a varbind object by other notification… |