Vendor: Emerson Computer PowerRoger Draper
Module: LIEBERT-GP-CONDITIONS-MIB
[Automatically extracted from oidview.com]
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.476.1.42.3.2.1.39 | lgpConditionUnderVoltage | 10 | 14 | This system has detected an under voltage condition. |
1.3.6.1.4.1.476.1.42.3.2.1.40 | lgpConditionOverload | 8 | 11 | This system has detected an overload condition. |
1.3.6.1.4.1.476.1.42.3.2.1.41 | lgpConditionScrShort | 4 | 4 | This system has detected a Silicon Controlled Rectifier (SCR) short condition. |
1.3.6.1.4.1.476.1.42.3.2.1.42 | lgpConditionScrOpen | 3 | 3 | This system has detected a Silicon Controlled Rectifier (SCR) open condition. |
1.3.6.1.4.1.476.1.42.3.2.1.43 | lgpConditionFanFailure | 3 | 3 | This system has detected a fan failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.44 | lgpConditionTransferInhibited | 0 | 0 | The system is preventing a transfer of the load to the alternate source. |
1.3.6.1.4.1.476.1.42.3.2.1.45 | lgpConditionAutoReTransferPrimed | 0 | 0 | The system is capable to retransfer to the preferred source. |
1.3.6.1.4.1.476.1.42.3.2.1.46 | lgpConditionSourcesOutOfSync | 0 | 0 | The system has detected that the input sources are not within the specified phase difference (synchronization window). |
1.3.6.1.4.1.476.1.42.3.2.1.47 | lgpConditionSourceFailure | 2 | 2 | This system has detected an input source failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.48 | lgpConditionAutoReTransferInhibited | 0 | 0 | The system is preventing a transfer of the load back to the prefered source. |
1.3.6.1.4.1.476.1.42.3.2.1.49 | lgpConditionAutoReTransferFailed | 0 | 0 | The system is failing to automatically retransfer the load back to the preferred source. |
1.3.6.1.4.1.476.1.42.3.2.1.50 | lgpConditionFuseOpen | 6 | 6 | This system has detected an open fuse condition. |
1.3.6.1.4.1.476.1.42.3.2.1.51 | lgpConditionDisconnect | 16 | 24 | The system has detected a disconnect condition. |
1.3.6.1.4.1.476.1.42.3.2.1.52 | lgpConditionFrequencyDeviation | 5 | 5 | This system has detected a frequency deviation condition. The frequency of a source is outside of the pre-determined thresholds f… |
1.3.6.1.4.1.476.1.42.3.2.1.53 | lgpConditionOverCurrent | 10 | 16 | This system has detected an current condition. The current of a source has risen above a pre-determined threshold for a device,… |
1.3.6.1.4.1.476.1.42.3.2.1.54 | lgpConditionSensorFailure | 17 | 17 | This system has detected a sensor failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.55 | lgpConditionInternalCommunicationFailure | 0 | 0 | This system has detected an internal communication failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.56 | lgpConditionExternalCommunicationFailure | 0 | 0 | This system has detected an external communication failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.57 | lgpConditionSourceGateDriveFailure | 2 | 2 | This system has detected a source gate drive failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.58 | lgpConditionDisconnectFailure | 5 | 5 | This system has detected a disconnect failure condition. A disconnect is a device which disconnects a conductor of a circuit from… |
1.3.6.1.4.1.476.1.42.3.2.1.59 | lgpConditionOverTemperature | 16 | 16 | This system has detected an over temperature condition. |
1.3.6.1.4.1.476.1.42.3.2.1.60 | lgpConditionLoadOnAlternateSource | 0 | 0 | The system has detected that the load is being supplied by the alternate source. |
1.3.6.1.4.1.476.1.42.3.2.1.61 | lgpConditionPhaseRotationError | 4 | 4 | This system has detected a phase rotation error condition. |
1.3.6.1.4.1.476.1.42.3.2.1.62 | lgpConditionControlModuleFailure | 1 | 1 | This system has detected a control module failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.63 | lgpConditionHistoryLogFull | 0 | 0 | The system has detected the history log is full. |
1.3.6.1.4.1.476.1.42.3.2.1.64 | lgpConditionConfigurationModified | 0 | 0 | The system has detected the configuration has been modified. |
1.3.6.1.4.1.476.1.42.3.2.1.65 | lgpConditionPasswordModified | 0 | 0 | The system has detected the password has been modified. |
1.3.6.1.4.1.476.1.42.3.2.1.66 | lgpConditionTimeModified | 0 | 0 | The system has detected the time has been modified. |
1.3.6.1.4.1.476.1.42.3.2.1.67 | lgpConditionDateModified | 0 | 0 | The system has detected the date has been modified. |
1.3.6.1.4.1.476.1.42.3.2.1.68 | lgpConditionEventLogCleared | 0 | 0 | The system has detected the event log has been cleared. |
1.3.6.1.4.1.476.1.42.3.2.1.69 | lgpConditionHistoryLogCleared | 0 | 0 | The system has detected the history log has been cleared. |
1.3.6.1.4.1.476.1.42.3.2.1.70 | lgpConditionUtilityFailure | 0 | 0 | The system has detected a utility failure. |
1.3.6.1.4.1.476.1.42.3.2.1.71 | lgpConditionBatteryTestInProgress | 0 | 0 | The system is performing a battery test at this time. |
1.3.6.1.4.1.476.1.42.3.2.1.72 | lgpConditionLoadOnBattery | 0 | 0 | The system load is being supported by the battery. |
1.3.6.1.4.1.476.1.42.3.2.1.74 | lgpConditionReplaceBattery | 0 | 0 | The system has detected the batteries are due to be replaced. |
1.3.6.1.4.1.476.1.42.3.2.1.75 | lgpConditionUpsShutdownPending | 0 | 0 | The system is in a shutdown pending condition. |
1.3.6.1.4.1.476.1.42.3.2.1.76 | lgpConditionBatteryChargerFailed | 0 | 0 | The system has detected the battery charger has failed. |
1.3.6.1.4.1.476.1.42.3.2.1.77 | lgpConditionBypassVoltageUnqualified | 0 | 0 | The system has detected the bypass voltage is unqualified. The voltage measurement is outside a pre-determined threshold range f… |
1.3.6.1.4.1.476.1.42.3.2.1.78 | lgpConditionCheckAirFilter | 0 | 0 | The system has detected it is time to check the air filter. |
1.3.6.1.4.1.476.1.42.3.2.1.79 | lgpConditionBrownOut | 0 | 0 | The system has detected a brown out condition. |
1.3.6.1.4.1.476.1.42.3.2.1.80 | lgpConditionMultipleTransferLockout | 0 | 0 | The system has locked out transfers to bypass. Too many transfers have occured over a specified amount of time. |
1.3.6.1.4.1.476.1.42.3.2.1.81 | lgpConditionBypassPhaseLost | 0 | 0 | The system has detected one or more bypass phases are missing. |
1.3.6.1.4.1.476.1.42.3.2.1.82 | lgpConditionMaintenceBypassInhibited | 0 | 0 | The system is preventing a transfer of the load to maintence bypass. |
1.3.6.1.4.1.476.1.42.3.2.1.83 | lgpConditionLoadLockedOnBypass | 0 | 0 | The system has detected an error and been put locked on bypass. |
1.3.6.1.4.1.476.1.42.3.2.1.84 | lgpConditionOutputToLoadShort | 0 | 0 | The system has detected an output to load short circuit condition. |
1.3.6.1.4.1.476.1.42.3.2.1.85 | lgpConditionEmergencyTransferToInverter | 0 | 0 | The system has detected an emergency transfer of the load to inverter. |
1.3.6.1.4.1.476.1.42.3.2.1.86 | lgpConditonEmergencyPowerOff | 0 | 0 | The system has detected an Emergency Power Off (EPO) condition. An external EPO switch has cut off the power source to the syste… |
1.3.6.1.4.1.476.1.42.3.2.1.87 | lgpConditionInverterBackFeed | 0 | 0 | The system has detected an inverter backfeed condition. The inverter is feeding power through the bypass back to the input. |
1.3.6.1.4.1.476.1.42.3.2.1.88 | lgpConditionDcGroundFault | 2 | 2 | The system has detected a DC ground fault. |
1.3.6.1.4.1.476.1.42.3.2.1.90 | lgpConditionBatteryLogFullWarning | 0 | 0 | None |
1.3.6.1.4.1.476.1.42.3.2.1.91 | lgpConditionInputCurrentUnbalanced | 0 | 0 | None |
1.3.6.1.4.1.476.1.42.3.2.1.92 | lgpConditionSelfTestFailed | 0 | 0 | lgpConditionSelftestFailed |
1.3.6.1.4.1.476.1.42.3.2.1.93 | lgpConditionInverterOutOfSynchronization | 0 | 0 | None |
1.3.6.1.4.1.476.1.42.3.2.1.94 | lgpConditionModuleAlarm | 8 | 8 | This system has detected an alarm within the multi-module system. |
1.3.6.1.4.1.476.1.42.3.2.1.95 | lgpConditionActiveModuleAlarm | 0 | 0 | The system has detected an active alarm in one, or more, of the sub-modules of the multi-module system. |
1.3.6.1.4.1.476.1.42.3.2.1.96 | lgpConditionControlFailure | 4 | 4 | This system has detected a control failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.97 | lgpConditionControlWarning | 2 | 2 | This system has detected a control warning conditions. |
1.3.6.1.4.1.476.1.42.3.2.1.98 | lgpConditionUserInterfaceFailure | 0 | 0 | The system has detected a user interface control failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.99 | lgpConditionLostPowerRedundancy | 0 | 0 | The system has detected the number of redundant power modules has fallen below the minimum redundant power module setting. |
1.3.6.1.4.1.476.1.42.3.2.1.100 | lgpConditionPowerModuleFailure | 0 | 0 | The system has detected a power module failure condition in the system. |
1.3.6.1.4.1.476.1.42.3.2.1.101 | lgpConditionBatteryModuleFailure | 0 | 0 | The system has detected a battery module failure condition in the system. |
1.3.6.1.4.1.476.1.42.3.2.1.102 | lgpConditionOutputToLoadOff | 0 | 0 | The system has detected that there is no power being supplied to the load. |
1.3.6.1.4.1.476.1.42.3.2.1.103 | lgpConditionSystemOff | 0 | 0 | The system is off. |
1.3.6.1.4.1.476.1.42.3.2.1.104 | lgpConditionRectifierStartupFailure | 0 | 0 | The system has detected a rectifier under voltage start-up failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.105 | lgpConditionRectifierFault | 0 | 0 | The system has detected a rectifier fault condition. |
1.3.6.1.4.1.476.1.42.3.2.1.106 | lgpConditionInverterShutdownLowDc | 0 | 0 | The system has shutdown the inverter due to a DC bus under voltage. |
1.3.6.1.4.1.476.1.42.3.2.1.107 | lgpConditionInverterFault | 0 | 0 | The system has detected an inverter fault condition. |
1.3.6.1.4.1.476.1.42.3.2.1.108 | lgpConditionInverterDcOffsetOverrun | 0 | 0 | The system has detected an over run of the inverter DC offset voltage. |
1.3.6.1.4.1.476.1.42.3.2.1.109 | lgpConditionParallelSysLowBatteryWarning | 0 | 0 | The parallel system has detected a low battery warning condition. |
1.3.6.1.4.1.476.1.42.3.2.1.110 | lgpConditionParallelSysLoadShareFault | 0 | 0 | The parallel system has detected a load share fault condition. |
1.3.6.1.4.1.476.1.42.3.2.1.111 | lgpConditionBatteryFault | 0 | 0 | The system has detected a battery fault condition. The battery conductors are either reversed or disconnected. |
1.3.6.1.4.1.476.1.42.3.2.1.112 | lgpConditionBatteryConverterFailure | 0 | 0 | The system has detected a battery converter failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.113 | lgpConditionBatteryBalancerFault | 0 | 0 | The system has detected a battery balancer fault condition. |
1.3.6.1.4.1.476.1.42.3.2.1.114 | lgpConditionpsUpsOperationFault | 0 | 0 | The system has detected an operation fault. The UPS attempted to transfer to maintenance bypass without following the proper se… |
1.3.6.1.4.1.476.1.42.3.2.1.115 | lgpConditionOutputToLoadOnJointMode | 0 | 0 | The system load is being supported by both the battery and rectifier. |
1.3.6.1.4.1.476.1.42.3.2.1.116 | lgpConditionInputNeutralLost | 0 | 0 | The system had detected the main input neutral is disconnected. |
1.3.6.1.4.1.476.1.42.3.2.1.117 | lgpConditionLowBatteryWarning | 0 | 0 | The battery's remaining charge is less than or equal to the configured low threshold. |
1.3.6.1.4.1.476.1.42.3.2.1.118 | lgpConditionInternalFault | 0 | 0 | The system has detected an internal fault. |
1.3.6.1.4.1.476.1.42.3.2.1.119 | lgpConditionBatteryTestFailed | 0 | 0 | The system has detected a battery self-test failure. |
1.3.6.1.4.1.476.1.42.3.2.1.120 | lgpConditionPowerModuleWarning | 0 | 0 | The system has detected an alarm condition on one, or more, power modules. |
1.3.6.1.4.1.476.1.42.3.2.1.121 | lgpConditionBatteryModuleWarning | 0 | 0 | The system has detected an alarm condition on one, or more, battery modules. |
1.3.6.1.4.1.476.1.42.3.2.1.122 | lgpConditionControlModuleWarning | 0 | 0 | The system has detected a control module warning. |
1.3.6.1.4.1.476.1.42.3.2.1.123 | lgpConditionUpsOperationFault | 0 | 0 | The system has detected an operation fault. The UPS attempted to transfer to maintenance bypass without following the proper se… |
1.3.6.1.4.1.476.1.42.3.2.1.124 | lgpConditionActiveAlarm | 0 | 0 | The system has detected an alarm condition. |
1.3.6.1.4.1.476.1.42.3.2.1.125 | lgpConditionRectifierCommunicationFailure | 0 | 0 | The system has detected an internal communication failure condition with the rectifier. |
1.3.6.1.4.1.476.1.42.3.2.1.126 | lgpConditionInverterCommunicationFailure | 0 | 0 | The system has detected an internal communication failure condition with the inverter. |
1.3.6.1.4.1.476.1.42.3.2.1.127 | lgpConditionParallelSysConnectionFault | 0 | 0 | The parallel system has detected a connection fault. One or more of the devices are not properly connected. |
1.3.6.1.4.1.476.1.42.3.2.1.128 | lgpConditionParallelSysCommunicationFailure | 0 | 0 | The parallel system has detected a communication failure. |
1.3.6.1.4.1.476.1.42.3.2.1.129 | lgpConditionLostBatteryRedundancy | 0 | 0 | The system has detected the number of redundant battery modules has fallen below the configured redundant battery module thresho… |
1.3.6.1.4.1.476.1.42.3.2.1.130 | lgpConditionCompPumpDownFailure | 2 | 2 | The system has detected that a compressor has failed to pump down. |
1.3.6.1.4.1.476.1.42.3.2.1.131 | lgpConditionChilledWaterLowWaterFlow | 0 | 0 | The system has detected a chilled water low water flow condition. |
1.3.6.1.4.1.476.1.42.3.2.1.132 | lgpConditionAirFilterClogged | 0 | 0 | The system has detected a air filter clogged condition. |
1.3.6.1.4.1.476.1.42.3.2.1.133 | lgpConditionHumidifierFailure | 0 | 0 | The system has detected a humidifier failure condition. |
1.3.6.1.4.1.476.1.42.3.2.1.134 | lgpConditionRunHoursExceeded | 11 | 11 | The system has detected a pre-determined run hours threshold has been exceeded. |
1.3.6.1.4.1.476.1.42.3.2.1.135 | lgpConditionCommWarning | 16 | 16 | The system has detected a loss of communications with another module. |
1.3.6.1.4.1.476.1.42.3.2.1.136 | lgpConditionUnitOn | 0 | 0 | The unit is on. |
1.3.6.1.4.1.476.1.42.3.2.1.137 | lgpConditionUnitOff | 0 | 0 | The unit is off. |
1.3.6.1.4.1.476.1.42.3.2.1.138 | lgpConditionSleepModeOff | 0 | 0 | The system sleep mode operation has been turned off. |
1.3.6.1.4.1.476.1.42.3.2.1.139 | lgpConditionPowerOn | 0 | 0 | The system power is on. |
... |