Reference record for OID 1.3.6.1.4.1.480.1.160.213


parent
1.3.6.1.4.1.480.1.160 (qmsSerial)
node code
213
node name
qmsSerHwDSRPOL
dot oid
1.3.6.1.4.1.480.1.160.213
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) qmsInc(480) qmsPtrErrorMsg(1) qmsSerial(160) qmsSerHwDSRPOL(213)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) qmsInc(480) qmsUIH(1) qmsSerial(160) qmsSerHwDSRPOL(213)}
  • ...skipped...
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) qmsInc(480) qmsPtrErrorMsg(1) qmsSerial(160) qmsSerHwDSRPOL(213)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) qmsInc(480) qmsUIH(1) qmsSerial(160) qmsSerHwDSRPOL(213)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) qmsInc(480) qmsPtrErrorMsg(1) qmsSerial(160) qmsSerHwDSRPOL(213)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) qmsInc(480) qmsUIH(1) qmsSerial(160) qmsSerHwDSRPOL(213)}
  • ...skipped...
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) qmsInc(480) qmsPtrErrorMsg(1) qmsSerial(160) qmsSerHwDSRPOL(213)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) qmsInc(480) qmsUIH(1) qmsSerial(160) qmsSerHwDSRPOL(213)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/qmsInc/qmsPtrErrorMsg/qmsSerial/qmsSerHwDSRPOL
  • /iso/identified-organization/dod/internet/private/enterprise/qmsInc/qmsUIH/qmsSerial/qmsSerHwDSRPOL
  • ...skipped...
  • /iso/org/dod/internet/private/enterprise/qmsInc/qmsPtrErrorMsg/qmsSerial/qmsSerHwDSRPOL
  • /iso/org/dod/internet/private/enterprise/qmsInc/qmsUIH/qmsSerial/qmsSerHwDSRPOL
  • /iso/org/dod/internet/private/enterprises/qmsInc/qmsPtrErrorMsg/qmsSerial/qmsSerHwDSRPOL
  • /iso/org/dod/internet/private/enterprises/qmsInc/qmsUIH/qmsSerial/qmsSerHwDSRPOL
  • ...skipped...
  • /iso/iso-identified-organization/dod/internet/private/enterprises/qmsInc/qmsPtrErrorMsg/qmsSerial/qmsSerHwDSRPOL
  • /iso/iso-identified-organization/dod/internet/private/enterprises/qmsInc/qmsUIH/qmsSerial/qmsSerHwDSRPOL
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/480/1/160/213

    Description by circitor

    Controls the flow of data between the printer and the host.

    Choices
    Reverse, Normal

    Default
    Normal

    Notes
    If the host uses hardware flow control, set this option to
    match the type used by the host.

    However, to download printer system software to flash
    ROM via the serial port, RTS and CTS must be set to
    On, and the cable pinouts must be connected as shown
    in the printer documentation.

    Parsed from file QMS-MIB.mib
    Module: QMS-MIB

    Information by oid_info

    Vendor: QMS, Inc.
    Module: QMS-MIB

    [Automatically extracted from oidview.com]

    Information by circitor

    qmsSerHwDSRPOL OBJECT-TYPE SYNTAX INTEGER { reverse(1), normal(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Controls the flow of data between the printer and the host. Choices Reverse, Normal Default Normal Notes If the host uses hardware flow control, set this option to match the type used by the host. However, to download printer system software to flash ROM via the serial port, RTS and CTS must be set to On, and the cable pinouts must be connected as shown in the printer documentation." ::= { qmsSerial 213 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.480)

    Lott Bill

    Brothers (19)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.480.1.160.100 qmsSerPSProtocol 0 0 Sets the binary communications protocol (BCP) for
    communicating over a serial interface to a PostScript
    printer.

    Choices
    Normal: En…
    1.3.6.1.4.1.480.1.160.101 qmsSerMode 0 0 Enables or disables the serial port.
    Choices
    Interactive: Establish two-way communication between
    the host and the printer.

    Noninte…
    1.3.6.1.4.1.480.1.160.102 qmsSerEmulation 0 0 Sets the serial interface emulation.

    Choices
    PostScript, HPGL, HPPCL, HEXDUMP, LN03, QUIC2
    CCITT, Line Printer, TIFF, CALS, CGM, E…
    1.3.6.1.4.1.480.1.160.103 qmsSerPriority 0 0 Allows you to specify which jobs are printed first, according to the
    interface through which they are received, when jobs are re…
    1.3.6.1.4.1.480.1.160.104 qmsSerBufferSize 0 0 Sets the minimum number of kilobytes of system memory
    allocated to the serial interface.

    Default
    15

    Notes
    This value must be less th…
    1.3.6.1.4.1.480.1.160.111 qmsSerEndDocumentMode 0 0 Enables (and identifies an end-of-job sequence) or
    disables data stream sensing for the end-of-document
    (EOD) command.

    Choices
    None…
    1.3.6.1.4.1.480.1.160.112 qmsSerSpoolTimeout 0 0 Sets the number of seconds the interface waits for data
    from the host before terminating a spooled print job.

    Choices
    0-99999

    Defau…
    1.3.6.1.4.1.480.1.160.201 qmsSerBaudRate 0 0 Sets the rate data is transmitted (bits per second) over
    the serial interface.

    Choices
    300, 600, 1200, 2400, 4800, 9600, 19200, 38…
    1.3.6.1.4.1.480.1.160.202 qmsSerParity 0 0 Sets the check bit used to identify data transmission errors.

    Choices:
    None, Odd, Even

    Default:
    None

    Note:
    The printer's parity setti…
    1.3.6.1.4.1.480.1.160.203 qmsSerIgnoreParity 0 0 Specifies how the printer should handle parity errors.

    Choices
    Off: Ignore parity errors. The printer prints its best
    interpretati…
    1.3.6.1.4.1.480.1.160.204 qmsSerRxSWFlow 0 0 Sets the software communication protocol used by the
    printer to control communication from the host computer.

    Choices
    ETX/ACK, Rob…
    1.3.6.1.4.1.480.1.160.205 qmsSerTxSWFlow 0 0 Sets the software communication protocol used by the
    host computer to control communication with the printer.

    Choices
    ETX/ACK, Non…
    1.3.6.1.4.1.480.1.160.206 qmsSerDataBits 0 0 Sets the number of data bits transmitted per character.

    Choices
    5 Bits, 6 Bits, 7 Bits, 8 Bits

    Default
    8 Bits
    1.3.6.1.4.1.480.1.160.207 qmsSerStopBits 0 0 Sets the number of stop bits transmitted per character.

    Choices
    1 Bit, 2 Bits, 1 1/2 Bits

    Default
    One Bit
    1.3.6.1.4.1.480.1.160.208 qmsSerHwCTS 0 0 Controls the flow of data between the printer and the host.

    Choices
    Off, On

    Default
    Off

    Notes
    If the host uses hardware flow control,…
    1.3.6.1.4.1.480.1.160.209 qmsSerHwRTS 0 0 Controls the flow of data between the printer and the host.

    Choices
    Off, On

    Default
    Off

    Notes
    If the host uses hardware flow control,…
    1.3.6.1.4.1.480.1.160.210 qmsSerHwDTR 0 0 Controls the flow of data between the printer and the host.

    Choices
    Off, On

    Default
    On

    Notes
    If the host uses hardware flow control, …
    1.3.6.1.4.1.480.1.160.211 qmsSerHwDTRPOL 0 0 Controls the flow of data between the printer and the host.

    Choices
    Reverse, Normal

    Default
    Normal

    Notes
    If the host uses hardware fl…
    1.3.6.1.4.1.480.1.160.212 qmsSerHwDSR 0 0 Controls the flow of data between the printer and the host.

    Choices
    Off, On

    Default
    Off

    Notes
    If the host uses hardware flow control,…