Vendor: Sync Research, Inc.
Module: TFRAP-MIB
[Automatically extracted from oidview.com]
tfrapCfgFrTable OBJECT IDENTIFIER ::= { tfrapConfiguration 5 }
tfrapCfgFrTable OBJECT IDENTIFIER ::= { tfrapConfiguration 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.5.2.5.1 | tfrapCfgFrAddrLen | 1 | 1 | Defines the size of the DLCI address field of the Frame Relay header. This setting must correspond to the Frame Relay transmissio… |
| 1.3.6.1.4.1.485.5.2.5.2 | tfrapCfgFrCrcMode | 1 | 1 | This defines the manner in which the unit handles HDLC protocol errors (crc errors) in a Frame Relay application. If Discard is s… |
| 1.3.6.1.4.1.485.5.2.5.3 | tfrapCfgFrLmiType | 1 | 1 | The LMI type used in a Frame Relay application. This setting must match the attached Frame Relay device configuration. Annex-A an… |
| 1.3.6.1.4.1.485.5.2.5.4 | tfrapCfgFrLmiInactivityTimeout | 1 | 1 | Timer used by the unit to determine that an attached device is not participating in the LMI protocol and that the unit should att… |
| 1.3.6.1.4.1.485.5.2.5.5 | tfrapCfgFrLmiKeepaliveTimeout | 1 | 1 | Timer used by the unit to determine the frequency at which Status Enquiries are issued during LMI sourcing states where the unit… |
| 1.3.6.1.4.1.485.5.2.5.6 | tfrapCfgFrAddrResMode | 1 | 1 | Enable ARP (2), INARP (3), both (4), or neither (1). |
| 1.3.6.1.4.1.485.5.2.5.7 | tfrapCfgFrAddrResInarpTimer | 1 | 1 | The frequency at which the unit issues INARP requests (in seconds) from 5 to 86400 (24 hours). |
| 1.3.6.1.4.1.485.5.2.5.8 | tfrapCfgFrLmiFullStatus | 1 | 1 | Timer used by the unit to determine if an LMI Full Status Report is missing. In the absence of a Full Status report for the durat… |
| 1.3.6.1.4.1.485.5.2.5.9 | tfrapCfgFrAddrResDlcis | 1 | 1 | Address Resolution Dlcis determines which dlcis are used for address resolution. Multiple DLCI support only applies to piggyback … |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.5.2.1 | tfrapCfgMgmtTable | 5 | 67 | None |
| 1.3.6.1.4.1.485.5.2.2 | tfrapCfgAppTable | 6 | 12 | None |
| 1.3.6.1.4.1.485.5.2.3 | tfrapCfgT1Table | 5 | 10 | None |
| 1.3.6.1.4.1.485.5.2.4 | tfrapCfgDteTable | 19 | 38 | None |
| 1.3.6.1.4.1.485.5.2.6 | tfrapCfgVnipTable | 8 | 23 | None |
| 1.3.6.1.4.1.485.5.2.7 | tfrapCfgFrPerf | 13 | 41 | None |
| 1.3.6.1.4.1.485.5.2.8 | tfrapCfgSecurityTable | 8 | 16 | None |
| 1.3.6.1.4.1.485.5.2.12 | tfrapCfgLock | 1 | 1 | Request to start configuration download and lock out any other means of configuring the unit. The integer passed in represents th… |
| 1.3.6.1.4.1.485.5.2.13 | tfrapCfgLockID | 1 | 1 | Returns the IP Address of the management station currently in control of configuration. A unit that is not in a configuration lo… |
| 1.3.6.1.4.1.485.5.2.14 | tfrapCfgID | 1 | 1 | A read of this object returns the Current Configuration ID string. A write sets the Configuration ID string. The string contains… |
| 1.3.6.1.4.1.485.5.2.15 | tfrapCfgStatus | 1 | 1 | The status of a configuration install is reported here. On startup, a status of success will be reported. (1) The configuration h… |
| 1.3.6.1.4.1.485.5.2.16 | tfrapCfgUnlock | 1 | 1 | The management station sets this variable to complete the configuration install process. Un-lock (1) notifies the agent to remove… |
| 1.3.6.1.4.1.485.5.2.17 | tfrapCfgUpdate | 1 | 1 | The management station sets this variable to complete the configuration install process. Update (1) notifies the agent to start t… |