Controls Local Aggregate Loopback. All data
received from the DTE is framed, formatted
and transmit towards the WAN while being looped
back towards the DTE. The loopback path covers
the entire digital data path within the device.
In Frame Relay mode, only error-free HDLC frames
will pass through the loopback path. Additionally,
in Frame Relay applications the unit will not
preserve the LMI path during this loopback and
in-band management may not operate.
(1) disable local aggregate (digital) loopback
(2) enable local aggregate (digital) loopback
Parsed from file TFRAP.MIB.txt
Company: None
Module: TFRAP-MIB
Controls Local Aggregate Loopback. All data
received from the DTE is framed, formatted
and transmit towards the WAN while being looped
back towards the DTE. The loopback path covers
the entire digital data path within the device.
In Frame Relay mode, only error-free HDLC frames
will pass through the loopback path. Additionally,
in Frame Relay applications the unit will not
preserve the LMI path during this loopback and
in-band management may not operate.
(1) disable local aggregate (digital) loopback
(2) enable local aggregate (digital) loopback
Parsed from file TFRAP-MIB.mib
Module: TFRAP-MIB
Vendor: Sync Research, Inc.
Module: TFRAP-MIB
[Automatically extracted from oidview.com]
tfrapDiagT1LocAggrLpbk OBJECT-TYPE SYNTAX INTEGER { aggr-lpbk-disable (1), aggr-lpbk-enable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Controls Local Aggregate Loopback. All data received from the DTE is framed, formatted and transmit towards the WAN while being looped back towards the DTE. The loopback path covers the entire digital data path within the device. In Frame Relay mode, only error-free HDLC frames will pass through the loopback path. Additionally, in Frame Relay applications the unit will not preserve the LMI path during this loopback and in-band management may not operate. (1) disable local aggregate (digital) loopback (2) enable local aggregate (digital) loopback " ::= { tfrapDiagT1Table 3 }
tfrapDiagT1LocAggrLpbk OBJECT-TYPE SYNTAX INTEGER { aggr-lpbk-disable (1), aggr-lpbk-enable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Controls Local Aggregate Loopback. All data received from the DTE is framed, formatted and transmit towards the WAN while being looped back towards the DTE. The loopback path covers the entire digital data path within the device. In Frame Relay mode, only error-free HDLC frames will pass through the loopback path. Additionally, in Frame Relay applications the unit will not preserve the LMI path during this loopback and in-band management may not operate. (1) disable local aggregate (digital) loopback (2) enable local aggregate (digital) loopback " ::= { tfrapDiagT1Table 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.5.3.2.3.0 | tfrapDiagT1LocAggrLpbk | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.5.3.2.1 | tfrapDiagT1LocLineLpbk | 1 | 1 | Controls local network loopback. All data (including framing and line errors) received from the WAN, regardless of format or cont… |
1.3.6.1.4.1.485.5.3.2.2 | tfrapDiagT1LocPylLpbk | 1 | 1 | Controls network payload loopback. All data received from the WAN is terminated, reframed and sent back towards the WAN. Framing … |
1.3.6.1.4.1.485.5.3.2.4 | tfrapDiagT1RmtLpbkStatus | 1 | 1 | Status of Remote Loopback commands sent or received on the WAN. (1) csu loopback from remote - indicates the node is in a Networ… |
1.3.6.1.4.1.485.5.3.2.5 | tfrapDiagT1RmtLpbkCmd | 1 | 1 | Remote loopback commands are intended to place compatible external equipment into a loopback state. The initiating unit will mai… |
1.3.6.1.4.1.485.5.3.2.6 | tfrapDiagT1TimeRemaining | 1 | 1 | The remaining time on the active loopback before the loopback times out and automatically clears itself to restore the unit to no… |