Vendor: Sync Research, Inc.
Module: TFRAP-MIB
[Automatically extracted from oidview.com]
tfrapDiagDteTable OBJECT IDENTIFIER ::= { tfrapDiagnostics 3 }
tfrapDiagDteTable OBJECT IDENTIFIER ::= { tfrapDiagnostics 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.5.3.3.1 | tfrapDiagDteSigRTS | 1 | 1 | Status of the Request to Send (RTS) signal from the DTE port. (1) RTS Active (2) RTS Inactive |
| 1.3.6.1.4.1.485.5.3.3.2 | tfrapDiagDteSigDTR | 1 | 1 | Status of the Data Terminal Ready (DTR) signal from the DTE port. (1) DTR Active (2) DTR Inactive |
| 1.3.6.1.4.1.485.5.3.3.3 | tfrapDiagDteLclLpbk | 1 | 1 | Controls the DTE loopback state. This is a bi-directional loopback state where both the DTE and WAN ports are placed in line loop… |
| 1.3.6.1.4.1.485.5.3.3.4 | tfrapDiagDteV54Lpbk | 1 | 1 | This reports the status of any remote V54 testing initiated by this unit. Remote V54 loopback commands are intended to place comp… |
| 1.3.6.1.4.1.485.5.3.3.5 | tfrapDiagDteRmtV54Lpbk | 1 | 1 | Remote V54 loopback commands are intended to place compatible external equipment into a loopback state. The initiating unit will … |
| 1.3.6.1.4.1.485.5.3.3.6 | tfrapDiagDteBerState | 1 | 1 | The unit is capable of sending a pseudorandom test pattern (511 or QRSS) out the WAN and monitoring the WAN received data for the… |
| 1.3.6.1.4.1.485.5.3.3.7 | tfrapDiagDteBerStatus | 1 | 1 | Displays the current BERT test sync status. (1) BERT is not running (2) BERT is running but is not in sync (3) BERT is running and… |
| 1.3.6.1.4.1.485.5.3.3.8 | tfrapDiagDteBerErrors | 1 | 1 | Displays the number of errors detected in Bert Test. |
| 1.3.6.1.4.1.485.5.3.3.9 | tfrapDiagDteBerErrSec | 1 | 1 | Displays the number of seconds containing 1 or more errors in BERT Test. |
| 1.3.6.1.4.1.485.5.3.3.10 | tfrapDiagDteBerTimeElaps | 1 | 1 | Elapsed time since BERT test was started or cleared. |
| 1.3.6.1.4.1.485.5.3.3.11 | tfrapDiagDteBerResyncs | 1 | 1 | Displays the number of times BERT test has synched up on the pattern. The BERT will attempt to resynchronize in response to exces… |
| 1.3.6.1.4.1.485.5.3.3.12 | tfrapDiagDteBerPattern | 1 | 1 | The type of pseudorandom BERT pattern used. (1) 511: 9-bit pseudorandom pattern (2) QRSS: 20-bit pseudorandom pattern with no more… |
| 1.3.6.1.4.1.485.5.3.3.13 | tfrapDiagDteTimeRemaining | 1 | 1 | The remaining time on the active diagnostic before it times out and the unit returns to normal operation. The time is hundredths … |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.5.3.1 | tfrapDiagUnitTable | 3 | 6 | None |
| 1.3.6.1.4.1.485.5.3.2 | tfrapDiagT1Table | 6 | 12 | None |
| 1.3.6.1.4.1.485.5.3.6 | tfrapDiagVnipTable | 1 | 11 | Table of Diagnostics performed with the VNIP protocol |