Vendor: Sync Research, Inc.
Module: SFRAP-MIB
[Automatically extracted from oidview.com]
sfrapCfgFrPerf OBJECT IDENTIFIER ::= { sfrapConfiguration 7 }
sfrapCfgFrPerf OBJECT IDENTIFIER ::= { sfrapConfiguration 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.7.2.7.1 | sfrapCfgFrPerfDlciNamesTable | 1 | 7 | This table allows the user to configure DLCI specific parameters such as Names, CIR, and EIR. Additionally, any DLCIs configured … |
| 1.3.6.1.4.1.485.7.2.7.2 | sfrapCfgFrPerfDlciNamesDelete | 1 | 1 | Setting this object with a specific DLCI value will remove the DLCI form the DLCI-specific parameters database. |
| 1.3.6.1.4.1.485.7.2.7.3 | sfrapCfgFrPerfTimers | 2 | 4 | sfrapCfgFrPerftimers |
| 1.3.6.1.4.1.485.7.2.7.4 | sfrapCfgFrPerfUserProtocolsTable | 1 | 3 | This table allows the user to select TCP/UDP ports for statistics collection. Tx and Rx byte counts will collected on the specif… |
| 1.3.6.1.4.1.485.7.2.7.5 | sfrapCfgFrPerfLTDlciFilterTable | 1 | 3 | Long term statistics can only be collected on a limited number of DLCIs. The value of SysLTFNumDlcis defines the maximum number o… |
| 1.3.6.1.4.1.485.7.2.7.6 | sfrapCfgFrPerfLTProtocolFilterTable | 1 | 3 | Long term statistics can only be collected on a limited number of protocols. The maximum number of Long Term Protoocls are define… |
| 1.3.6.1.4.1.485.7.2.7.7 | sfrapCfgFrPerfDlciDefaultUtilThreshold | 1 | 1 | The default threshold for generating a utilization threshold trap as a percentage of the CIR. This value is used for sfrapCfgFrPer… |
| 1.3.6.1.4.1.485.7.2.7.8 | sfrapCfgFrPerfDlciUtilDuration | 1 | 1 | The number of Short Term Intervals that a DLCI's utilization as a percentage of CIR must be above or below the value of sfrapCfgFr… |
| 1.3.6.1.4.1.485.7.2.7.9 | sfrapCfgFrPerfDlciNamesTableClear | 1 | 1 | Clears the smperCfgFrPerfDlciNamesTable (1) clear the table or (2) clear the table but don't remove the dlcis from the short term … |
| 1.3.6.1.4.1.485.7.2.7.10 | sfrapCfgFrPerfUserProtocolsTableClear | 1 | 1 | Clears the sfrapCfgFrPerfUserProtocolsTable (1) clear the table |
| 1.3.6.1.4.1.485.7.2.7.11 | sfrapCfgFrPerfLTDlciFilterTableClear | 1 | 1 | Clears the sfrapCfgFrPerfLTDlciFilterTable (1) clear the table |
| 1.3.6.1.4.1.485.7.2.7.12 | sfrapCfgFrPerfLTProtocolFilterTableClear | 1 | 1 | Clears the sfrapCfgFrPerfLTProtocolFilterTable (1) clear the table |
| 1.3.6.1.4.1.485.7.2.7.13 | sfrapCfgFrPerfUnprovDlcisDelete | 1 | 1 | Delete all unprovisioned and Not-In-LMI dlcis (1) delete all unprovisioned |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.7.2.1 | sfrapCfgMgmtTable | 5 | 67 | None |
| 1.3.6.1.4.1.485.7.2.2 | sfrapCfgAppTable | 9 | 18 | None |
| 1.3.6.1.4.1.485.7.2.4 | sfrapCfgDteTable | 1 | 6 | The table of DTE port configurations. |
| 1.3.6.1.4.1.485.7.2.5 | sfrapCfgFrTable | 9 | 18 | None |
| 1.3.6.1.4.1.485.7.2.6 | sfrapCfgVnipTable | 8 | 23 | None |
| 1.3.6.1.4.1.485.7.2.8 | sfrapCfgSecurityTable | 5 | 10 | None |
| 1.3.6.1.4.1.485.7.2.12 | sfrapCfgLock | 1 | 1 | Request to start configuration download and lock out any other means of configuring the unit. The integer passed in represents th… |
| 1.3.6.1.4.1.485.7.2.13 | sfrapCfgLockID | 1 | 1 | Returns the IP Address of the management station currently in control of configuration. A unit that is not in a configuration lo… |
| 1.3.6.1.4.1.485.7.2.14 | sfrapCfgID | 1 | 1 | A read of this object returns the Current Configuration ID string. A write sets the Configuration ID string. The string contains… |
| 1.3.6.1.4.1.485.7.2.15 | sfrapCfgStatus | 1 | 1 | The status of a configuration install is reported here. On startup, a status of success will be reported. (1) The configuration h… |
| 1.3.6.1.4.1.485.7.2.16 | sfrapCfgUnlock | 1 | 1 | The management station sets this variable to complete the configuration install process. Un-lock (1) notifies the agent to remove… |
| 1.3.6.1.4.1.485.7.2.17 | sfrapCfgUpdate | 1 | 1 | The management station sets this variable to complete the configuration install process. Update (1) notifies the agent to start t… |