Vendor: Juniper Networks/Unisphere
Module: Juniper-MPLS-MIB
[Automatically extracted from oidview.com]
usdMplsGroup OBJECT IDENTIFIER ::= { usdMplsLsrGlobalConfig 1 }
juniMplsGroup OBJECT IDENTIFIER ::= { juniMplsLsrGlobalConfig 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.1 | juniMplsGroupMplsEnable, usdMplsGroupMplsEnable | 1 | 1 | Enables or disables MPLS on the virtual router. When MPLS is created on the virtual router (VR), it remains adminstratively dis… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.2 | juniMplsGroupReopTimer, usdMplsGroupReopTimer | 1 | 1 | All LSPs setup in MPLS domain are reoptimized for better LSPs as and when available. This object allows configuration of the fr… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.3 | juniMplsGroupLabelRangeLow, usdMplsGroupLabelRangeLow | 1 | 1 | The lower end of the range of the platform label space from which the interfaces on a given LSR derive their label space. Ether… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.4 | juniMplsGroupLabelRangeHigh, usdMplsGroupLabelRangeHigh | 1 | 1 | The higher end of the range of the platform label space from which the interfaces on a given LSR derive their label space. Ethe… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.5 | juniMplsGroupLspRetryTimesNoroute, usdMplsGroupLspRetryTimesNoroute | 1 | 1 | This object configures the number of retries for LSP setup after a failure due to no available route. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.6 | juniMplsGroupLspRetryIntervalNoroute, usdMplsGroupLspRetryIntervalNoroute | 1 | 1 | This object configures the time interval between two successive LSP setup retries after a failure due to no available route. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.7 | juniMplsGroupLspRetryTimes, usdMplsGroupLspRetryTimes | 1 | 1 | Use this object to configure number of retries for LSP setup after a failure other than one due to no available route. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.8 | juniMplsGroupLspRetryInterval, usdMplsGroupLspRetryInterval | 1 | 1 | Use this object to configure the time interval between two LSP setup retries after a failure other than one due to no available … |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.9 | juniMplsGroupLdpRetryTimesNoroute, usdMplsGroupLdpRetryTimesNoroute | 1 | 1 | Use this object to configure the number of retries for LDP to setup LSP after a failure due to no available route. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.10 | juniMplsGroupLdpRetryIntervalNoroute, usdMplsGroupLdpRetryIntervalNoroute | 1 | 1 | Use this object to configure the time interval between two successive LSP setup retries by LDP after a failure due to no availab… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.11 | juniMplsGroupLdpRetryTimes, usdMplsGroupLdpRetryTimes | 1 | 1 | Use this object to configure LSP setup retries by LDP after a failure other than one due to no available route. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.12 | juniMplsGroupLdpRetryInterval, usdMplsGroupLdpRetryInterval | 1 | 1 | Use this object to configure time interval between two LSP setup retries by LDP after a failure other than one due to no availab… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.13 | juniMplsGroupLdpSessionRetries, usdMplsGroupLdpSessionRetries | 1 | 1 | Use this object to configure the number of LDP session retries. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.14 | juniMplsGroupLdpSessionRetryTimer, usdMplsGroupLdpSessionRetryTimer | 1 | 1 | Use this object to configure the time interval between two LDP session retries. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.15 | juniMplsGroupTopologyDrivenIpProfileName, usdMplsGroupTopologyDrivenIpProfileName | 1 | 1 | Usually IP interfaces are stacked on top of the MPLS tunnels. The profiled tunnels are associated with IP interfaces with profi… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.16 | juniMplsGroupTopologyDrivenLdpEgressIpIntf, usdMplsGroupTopologyDrivenLdpEgressIpIntf | 1 | 1 | This object allows enabling/disabling of IP interfaces created over egress LSPs setup by topology driven LSP setup configuration… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.17 | juniMplsGroupTopologyDrivenLdpIngressIpIntf, usdMplsGroupTopologyDrivenLdpIngressIpIntf | 1 | 1 | This object allows enabling/disabling of IP interfaces created over ingress LSPs setup by topology driven LSP setup configuratio… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.18 | juniMplsGroupTopologyDrivenLdpEgressIpIntfHostOnly, usdMplsGroupTopologyDrivenLdpEgressIpIntfHostOnly | 1 | 1 | This object allows enabling/disabling of IP interfaces created over egress LSPs to host only IP addresses setup by topology driv… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.19 | juniMplsGroupTopologyDrivenLdpIngressIpIntfHostOnly, usdMplsGroupTopologyDrivenLdpIngressIpIntfHostOnly | 1 | 1 | This object allows enabling/disabling of IP interfaces created over ingress LSPs to host only IP addresses setup by topology dri… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.20 | juniMplsGroupTopologyDrivenLdpEgressIpIntfPolicyListType, usdMplsGroupTopologyDrivenLdpEgressIpIntfPolicyListType | 1 | 1 | There are two types of policy list type defined for the locally defined labels advertisement to neighbors; viz. accessList and p… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.21 | juniMplsGroupTopologyDrivenLdpIngressIpIntfPolicyListType, usdMplsGroupTopologyDrivenLdpIngressIpIntfPolicyListType | 1 | 1 | There are two types of policy list type defined for the locally defined labels advertisement to neighbors; viz. accessList and p… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.22 | juniMplsGroupTopologyDrivenLdpEgressIpIntfPolicyList, usdMplsGroupTopologyDrivenLdpEgressIpIntfPolicyList | 1 | 1 | This object used to configure egress list name of topology driven LSPs over IP interfaces. For successful configurations the eg… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.23 | juniMplsGroupTopologyDrivenLdpIngressIpIntfPolicyList, usdMplsGroupTopologyDrivenLdpIngressIpIntfPolicyList | 1 | 1 | This object used to configure ingress list name of topology driven LSPs over IP interfaces. For successful configurations ingre… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.24 | juniMplsGroupTopologyDrivenLdp, usdMplsGroupTopologyDrivenLdp | 1 | 1 | LDP is used for label distributions control for setting up the LSPs. Topology driven LSPs also setup using LDP label distributio… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.25 | juniMplsGroupLspLabelDistCtrlMode, usdMplsGroupLspLabelDistCtrlMode | 1 | 1 | Some FECs correspond to address prefixes which are distributed via a dynamic routing algorithm. The setup of the LSPs for these… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.26 | juniMplsGroupLdpAdvHostOnly, usdMplsGroupLdpAdvHostOnly | 1 | 1 | This object allows to enable/disable LDP label advertisement mode for host only LSPs. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.27 | juniMplsGroupLsrState, usdMplsGroupLsrState | 1 | 1 | This object value displays the status of MPLS enabled LSR such as state is up or down etc. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.28 | juniMplsGroupReopNow, usdMplsGroupReopNow | 1 | 1 | All LSPs setup in MPLS domain are reoptimized for better LSPs as and when available. Setting this object forces an immediate ch… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.29 | juniMplsGroupIpTtlPropagate | 1 | 1 | Indicate the IP TTL propagation status on ingress LSPs. none - Not set to anything. hideForwardedAndLocal - Hide… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.54.1.1.2 | juniMplsGroupList, usdMplsGroupList | 5 | 25 | None |