Vendor: Memotec Communications
Module: CXProduct-SMI
[Automatically extracted from oidview.com]
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.495.2.1.6.29.1 | x25LowerPoolThreshold | 1 | 1 | Determines the minimum amount of system resources which are required by the X.25 layer. When system resources drop below this th… |
1.3.6.1.4.1.495.2.1.6.29.2 | x25ConfigErrorIndication, x25UpperPoolThreshold | 1 | 1 | Determines the amount of system resources which are required by the X.25 layer to avoid congestion. When system resources drop b… |
1.3.6.1.4.1.495.2.1.6.29.3 | x25RouteMask | 1 | 1 | Determines the number of digits to use for routing calls. If set to value '0', calls are routed normally, according to the calle… |
1.3.6.1.4.1.495.2.1.6.29.4 | x25BillingSegmentSize | 1 | 1 | Determines the size of billing data segments. Range of Values: 16 - 1024 bytes Default Value: 16 bytes Related Objects: x25Billing x… |
1.3.6.1.4.1.495.2.1.6.29.5 | x25Billing | 1 | 1 | Determines if this layer generates the x25BillingIndication trap. For switched virtual circuits the trap is generated each time … |
1.3.6.1.4.1.495.2.1.6.29.6 | x25NetworkType | 1 | 1 | Determines the format of the cause codes the X.25 layer adds to Reset, Restart, and Clear packets. Note: The X.25 layer will not … |
1.3.6.1.4.1.495.2.1.6.29.7 | x25HuntGroupRotation | 1 | 1 | Determines if hunt group members are rotated. Enabling rotation causes hunting to begin with a different hunt group member each … |
1.3.6.1.4.1.495.2.1.6.29.10 | x25Alarms | 1 | 1 | For future use. Determines if this layer generates the x25SapAlarm trap. Options: disabled (1): This layer does not generate the … |
1.3.6.1.4.1.495.2.1.6.29.11 | x25SapStatusEvent | 1 | 1 | For future use. Indicates the status reported by an x25SapAlarm trap when it occurs. This object always returns the value 'noEve… |
1.3.6.1.4.1.495.2.1.6.29.12 | x25ConfigErrorEvent | 1 | 1 | For future use. Indicates the status reported by an x25ConfigErrorIndication trap when it occurs. This object always returns the … |
1.3.6.1.4.1.495.2.1.6.29.19 | x25SoftwareVersions | 1 | 1 | Identifies the X.25 software revision number, which is displayed as a string of five numbers each separated by a period (1.2.3.4… |
1.3.6.1.4.1.495.2.1.6.29.20 | x25LogicalLinkTable | 1 | 7 | A logical link is a group of one or more lower service access points(SAPs) created for the purpose of route balancing. Two types… |
1.3.6.1.4.1.495.2.1.6.29.21 | x25SapTable | 1 | 71 | The SAP table contains configuration information for each X.25 layer SAP (service access point). Service Access Points Two types o… |
1.3.6.1.4.1.495.2.1.6.29.22 | x25SapStatsTable | 1 | 33 | A table containing statistical information about each service access point. |
1.3.6.1.4.1.495.2.1.6.29.23 | x25CugTable | 1 | 9 | This tables contains CUG (closed user group) definitions for the X.25 layer. Any service access point (upper or lower) can be pa… |
1.3.6.1.4.1.495.2.1.6.29.24 | x25RouteTable | 1 | 9 | The SVC Route table contains the definitions used to route all switched virtual circuits. A route entry consists of the called ad… |
1.3.6.1.4.1.495.2.1.6.29.25 | x25HuntGroupTable | 1 | 6 | This table contains Hunt Group definitions for the X.25 layer. A hunt group is a grouping of upper and lower SAPs (service acces… |
1.3.6.1.4.1.495.2.1.6.29.26 | x25HuntGroupOperTable | 1 | 5 | This table contains the current active Hunt Group (closed user group) definitions for the X.25 layer. Use the x25HuntGroupTable … |
1.3.6.1.4.1.495.2.1.6.29.27 | x25PvcTable | 1 | 21 | This table contains definitions used to route X.25 PVCs (permanent virtual circuits). A PVC is always routed between two lower S… |
1.3.6.1.4.1.495.2.1.6.29.28 | x25LcnStatusTable | 1 | 32 | A table containing current information about established virtual circuits (permanent or switched) within the layer. |
1.3.6.1.4.1.495.2.1.6.29.30 | x25MibLevel | 1 | 1 | Used to determine current MIB module release supported by the agent. Object is in decimal. |