Defines the protocol format that is used for incoming call or call request
packets to the X.25 call data field.
The field consists of 4 hexadecimal octets where the first octet is coded as
follows:
bits 8 & 7
- 00 for CCITT use
- 01 for national use
- 10 reserved for international user bodies
- 11 for DTE-DTE use
When bits 8 & 7 are equal to 00, bits 6 to 1 will be equal to 000001. The first
octet is shown as 01, 00, 00, 00. The first 0 in each number is optional and
may be shown as 1, 0, 0, 0.
All bits of octets 2, 3 and 4 are set to 0. They are reserved as a future
mechanism for providing the called PAD or packet mode DTE (user) with
additional information pertaining to the calling party.
Default Value: 01,00,00,00
Configuration Changed: Operative
Parsed from file CXASYNC.MIB.txt
Company: None
Module: CXAsync-MIB
Defines the protocol format that is used for incoming call or call request
packets to the X.25 call data field.
The field consists of 4 hexadecimal octets where the first octet is coded as
follows:
bits 8 & 7
- 00 for CCITT use
- 01 for national use
- 10 reserved for international user bodies
- 11 for DTE-DTE use
When bits 8 & 7 are equal to 00, bits 6 to 1 will be equal to 000001. The first
octet is shown as 01, 00, 00, 00. The first 0 in each number is optional and
may be shown as 1, 0, 0, 0.
All bits of octets 2, 3 and 4 are set to 0. They are reserved as a future
mechanism for providing the called PAD or packet mode DTE (user) with
additional information pertaining to the calling party.
Default Value: 01,00,00,00
Configuration Changed: Operative
Parsed from file CXAsync-MIB.mib
Module: CXAsync-MIB
Vendor: Memotec Communications
Module: CXAsync-MIB
[Automatically extracted from oidview.com]
asySapProtocolId OBJECT-TYPE SYNTAX DisplayString (SIZE (7..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the protocol format that is used for incoming call or call request packets to the X.25 call data field. The field consists of 4 hexadecimal octets where the first octet is coded as follows: bits 8 & 7 - 00 for CCITT use - 01 for national use - 10 reserved for international user bodies - 11 for DTE-DTE use When bits 8 & 7 are equal to 00, bits 6 to 1 will be equal to 000001. The first octet is shown as 01, 00, 00, 00. The first 0 in each number is optional and may be shown as 1, 0, 0, 0. All bits of octets 2, 3 and 4 are set to 0. They are reserved as a future mechanism for providing the called PAD or packet mode DTE (user) with additional information pertaining to the calling party. Default Value: 01,00,00,00 Configuration Changed: Operative " REFERENCE "CCITT X.28 3.1.3, X.29 4.2" DEFVAL { "01,00,00,00" } ::= { asySapEntry 27 }
asySapProtocolId OBJECT-TYPE SYNTAX DisplayString (SIZE (7..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the protocol format that is used for incoming call or call request packets to the X.25 call data field. The field consists of 4 hexadecimal octets where the first octet is coded as follows: bits 8 & 7 - 00 for CCITT use - 01 for national use - 10 reserved for international user bodies - 11 for DTE-DTE use When bits 8 & 7 are equal to 00, bits 6 to 1 will be equal to 000001. The first octet is shown as 01, 00, 00, 00. The first 0 in each number is optional and may be shown as 1, 0, 0, 0. All bits of octets 2, 3 and 4 are set to 0. They are reserved as a future mechanism for providing the called PAD or packet mode DTE (user) with additional information pertaining to the calling party. Default Value: 01,00,00,00 Configuration Changed: Operative " REFERENCE "CCITT X.28 3.1.3, X.29 4.2" DEFVAL { "01,00,00,00" } ::= { asySapEntry 27 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.495.2.1.6.30.20.1.1 | asySapNumber | 0 | 0 | Indicates the table row containing configuration or monitoring objects for a SAP (service access point) associated with the slot… |
1.3.6.1.4.1.495.2.1.6.30.20.1.2 | asySapRowStatus | 0 | 0 | Indicates whether or not this specific entry is configured within the MIB. Options: invalid (1): Row is flagged and deleted from … |
1.3.6.1.4.1.495.2.1.6.30.20.1.3 | asySapAlias | 0 | 0 | Determines the name which uniquely identifies the SAP (service access point). Range of Values: 1 to 16 alphanumeric characters be… |
1.3.6.1.4.1.495.2.1.6.30.20.1.4 | asySapMCompanionAlias | 0 | 0 | Determines the name which uniquely identifies the companion MAC SAP (service access point) which will communicate with this SAP.… |
1.3.6.1.4.1.495.2.1.6.30.20.1.5 | asySapNCompanionAlias | 0 | 0 | Determines the name which uniquely identifies the X.25 SAP (service access point) which will communicate with this SAP. Range of … |
1.3.6.1.4.1.495.2.1.6.30.20.1.6 | asySapX3Profile | 0 | 0 | Tells the SAP (service access point) which set of X.3 parameters to use. Range of Values: 1 - 255 Default Value: 92 Configuration … |
1.3.6.1.4.1.495.2.1.6.30.20.1.7 | asySapNUI | 0 | 0 | Defines the Network User ID for this SAP (service access point). Options: 1 to 14 alphanumeric characters Default Value: 0 Configu… |
1.3.6.1.4.1.495.2.1.6.30.20.1.8 | asySapAddress | 0 | 0 | Defines the calling address for this SAP (service access point). Range of Values: 1 to 15 digits Default Value: 0 Configuration Ch… |
1.3.6.1.4.1.495.2.1.6.30.20.1.9 | asySapDisconnectRequest | 0 | 0 | Sends a Disconnect Request to the MAC layer when the YT timer expires. Options: Yes = Enable the disconnect request No = Disable t… |
1.3.6.1.4.1.495.2.1.6.30.20.1.10 | asySapRxThruputClass | 0 | 0 | Defines the default receive throughput class that is used at this SAP (service access point). Range of Values: 75 - 64000 bps Defa… |
1.3.6.1.4.1.495.2.1.6.30.20.1.11 | asySapTxThruputClass | 0 | 0 | Defines the default transmit throughput class that is used at this SAP (service access point). Range of Values: 75 to 64000 bps De… |
1.3.6.1.4.1.495.2.1.6.30.20.1.12 | asySapTxPacketSize | 0 | 0 | Defines the size of the transmit packet for the Async layer. Range of Values: 16 to 4096 bytes Default Value: 128 bytes Configurat… |
1.3.6.1.4.1.495.2.1.6.30.20.1.13 | asySapRxPacketSize | 0 | 0 | Defines the size of the receive packet for the Async layer. Range of Values: 16 to 4096 bytes Default Value: 128 bytes Configurati… |
1.3.6.1.4.1.495.2.1.6.30.20.1.14 | asySapTxWindowSize | 0 | 0 | Defines the size of the transmit window for the Async layer. Range of Values: 1 to 127 Default Value: 2 Configuration Changed: Ope… |
1.3.6.1.4.1.495.2.1.6.30.20.1.15 | asySapRxWindowSize | 0 | 0 | Defines the size of the receive window for the Async layer. Range of Values: 1 to 127 Default Value: 2 Configuration Changed: Oper… |
1.3.6.1.4.1.495.2.1.6.30.20.1.16 | asySapYTTimer | 0 | 0 | Defines the time of inactivity, in seconds, after which the SAP (service access point) will send a disconnect request to the MAC… |
1.3.6.1.4.1.495.2.1.6.30.20.1.17 | asySapSRTimer | 0 | 0 | Defines the time of inactivity, in seconds, between command characters. The timer starts when the command mode is entered or whe… |
1.3.6.1.4.1.495.2.1.6.30.20.1.18 | asySapNUILength | 0 | 0 | Defines the length, in nibbles, allowed for the Network User ID. Range of Values: 1 to 14 Default Value: 0 Configuration Changed: … |
1.3.6.1.4.1.495.2.1.6.30.20.1.19 | asySapReverseChargingAcceptance | 0 | 0 | Authorizes the DCE (Async application) to transmit incoming calls to the DTE (Async user) that requested the reverse charging, i… |
1.3.6.1.4.1.495.2.1.6.30.20.1.20 | asySapChargingInformation | 0 | 0 | Authorizes the DCE (Async application) to send charging information to the DTE (user) with the Clear Indication or Clear Confirm… |
1.3.6.1.4.1.495.2.1.6.30.20.1.21 | asySapSubscriptionCUG | 0 | 0 | Enables the DTE (User) to subscribe to one or more CUGs (Closed User Groups). A CUG permits the DTEs belonging to the group to c… |
1.3.6.1.4.1.495.2.1.6.30.20.1.22 | asySapSubscriptionCUGOA | 0 | 0 | Enables the DTE (user) to subscribe to one or more CUGs (Closed User Groups), as in object asySapSubscriptionCUG, with outgoing … |
1.3.6.1.4.1.495.2.1.6.30.20.1.23 | asySapSubscriptionCUGIA | 0 | 0 | Enables the DTE (user) to subscribe to one or more CUGs (Closed User Groups), as in object asySapSubscriptionCUG, with incoming … |
1.3.6.1.4.1.495.2.1.6.30.20.1.24 | asySapPreferentialCUGIndex | 0 | 0 | Defines the preferential CUG (Closed User Group) for a DTE (user) with a CUG, CUGOA or CUGIA subscription. Range of Values: 0 to 9… |
1.3.6.1.4.1.495.2.1.6.30.20.1.25 | asySapReceiptConfirmation | 0 | 0 | Tells the X.25 layer which receipt confirmation value is required by this SAP (service access point). Options: noAck dBit localAck xm… |
1.3.6.1.4.1.495.2.1.6.30.20.1.26 | asySapEnableProtocolId | 0 | 0 | Controls whether or not the Protocol ID field of the user data is inserted by the Async layer. Options: enable = Allows up to 12 b… |
1.3.6.1.4.1.495.2.1.6.30.20.1.28 | asySapPromptSignal | 0 | 0 | Defines the prompt PAD service signal (banner) that is sent to the MAC layer whenever the Async PAD enters a PAD waiting state o… |
1.3.6.1.4.1.495.2.1.6.30.20.1.29 | asySapAutoConnectDteId | 0 | 0 | Identifies the remote DTE (by name) to be connected to whenever the async sap receives a Connect Indication or Connect Confirm f… |
1.3.6.1.4.1.495.2.1.6.30.20.1.30 | asySapAutoConnectRetry | 0 | 0 | Defines the number of times this async sap will try to connect (if Connect Accept is not received from the X.25 layer) to the re… |
1.3.6.1.4.1.495.2.1.6.30.20.1.31 | asySapAutoConnectDelayTimer | 0 | 0 | Defines the time in seconds this async sap will wait before trying to connect to the remote DTE defined by the object asySapAuto… |
1.3.6.1.4.1.495.2.1.6.30.20.1.32 | asySapHardwareFlowControl | 0 | 0 | Enables the MAC to flow control the device via the EIA RTS/CTS signal. Options: Yes No Default Value: No Configuration Changed: Oper… |
1.3.6.1.4.1.495.2.1.6.30.20.1.33 | asySapProtocolType | 0 | 0 | Defines the Async Protocol type for this sap. Options: normal (1) for Normal Async (X.3, X.28, X.29) protocol. iocProtocol (2) fo… |
1.3.6.1.4.1.495.2.1.6.30.20.1.37 | asySapControl | 0 | 0 | Defines the control that is used with the specified Async layer SAP (service access point). Options: clearStats (1): Zeros all the … |
1.3.6.1.4.1.495.2.1.6.30.20.1.40 | asySapState | 0 | 0 | Indicates the current state of the Async layer SAP(service access point). Options: disconnected (1) enabled (2) connecting (3) data … |
1.3.6.1.4.1.495.2.1.6.30.20.1.41 | asySapAsyncFlowControlState | 0 | 0 | Indicates whether this SAP (service access point) was forced to initiate flow control procedures by the MAC (media access contro… |
1.3.6.1.4.1.495.2.1.6.30.20.1.42 | asySapNetworkFlowControlState | 0 | 0 | Indicates whether or not this SAP (service access point) was forced to initiate flow control procedures by the network layer. Opt… |
1.3.6.1.4.1.495.2.1.6.30.20.1.43 | asySapAsyncTxQueueSize | 0 | 0 | Indicates the current number of frames to be transmitted to the MAC (media access control) layer. |
1.3.6.1.4.1.495.2.1.6.30.20.1.44 | asySapX25TxQueueSize | 0 | 0 | Indicates the current number of frames to be send to the network layer. |
1.3.6.1.4.1.495.2.1.6.30.20.1.50 | asySapNumberConnects | 0 | 0 | Indicates the number of call attempts by this SAP (service access point). |
1.3.6.1.4.1.495.2.1.6.30.20.1.51 | asySapNumberDisconnects | 0 | 0 | Indicates the number of disconnects for this SAP (service access point). |
1.3.6.1.4.1.495.2.1.6.30.20.1.52 | asySapTxDataCharacters | 0 | 0 | Indicates the number of data characters that were transmitted from this SAP (service access point) to the MAC layer. |
1.3.6.1.4.1.495.2.1.6.30.20.1.53 | asySapRxDataCharacters | 0 | 0 | Indicates the number of data characters that were received at this SAP (service access point) from the MAC layer. |
1.3.6.1.4.1.495.2.1.6.30.20.1.54 | asySapParityErrors | 0 | 0 | Indicates the number of characters with parity errors that were received at this SAP (service access point). |
1.3.6.1.4.1.495.2.1.6.30.20.1.55 | asySapOverruns | 0 | 0 | Indicates the number of characters with overrun errors that were received at this SAP (service access point). |
1.3.6.1.4.1.495.2.1.6.30.20.1.56 | asySapFlowControlByUser | 0 | 0 | Indicates the number of flow control characters that were received by this SAP (service access point) from the Async port. |
1.3.6.1.4.1.495.2.1.6.30.20.1.57 | asySapFlowControlByX25 | 0 | 0 | Indicates the number of flow control messages that were received by this SAP (service access point) from the network layer. |
1.3.6.1.4.1.495.2.1.6.30.20.1.58 | asySapFlowControlToUser | 0 | 0 | Indicates the number of flow control characters that were transmitted by this SAP (service access point) to the Async port. |
1.3.6.1.4.1.495.2.1.6.30.20.1.59 | asySapFlowControlToX25 | 0 | 0 | Indicates the number of flow control messages that were sent by this SAP (service access point) to the network layer. |
1.3.6.1.4.1.495.2.1.6.30.20.1.60 | asySapRxReset | 0 | 0 | Indicates the number of resets that were received at this SAP (service access point) from the network layer. |
1.3.6.1.4.1.495.2.1.6.30.20.1.61 | asySapRxBreak | 0 | 0 | Indicates the number of breaks that were received at this SAP (service access point). |
1.3.6.1.4.1.495.2.1.6.30.20.1.62 | asySapTxBreak | 0 | 0 | Indicates the number of breaks that were transmitted from this SAP (service access point). |
1.3.6.1.4.1.495.2.1.6.30.20.1.63 | asySapRxDiscardCharacters | 0 | 0 | Indicates the number of discard characters that were received at this SAP (service access point). |