Controls sending of source address related traps.
Parsed from file rrev2-mib.mib.txt
Company: None
Module: REPEATER-MIB-2
Controls sending of source address related traps.
Parsed from file REPEATER-MIB-2.mib
Module: REPEATER-MIB-2
deviceSrcAddrTraps OBJECT-TYPE SYNTAX INTEGER { trapsoff(1), trapson(2) } ACCESS read-write STATUS optional DESCRIPTION "Controls sending of source address related traps." DEFVAL { trapson } ::= { device 27 }
Vendor: Enterasys Networks Inc.
Module: IRM3-MIB
[Automatically extracted from oidview.com]
deviceSrcAddrTraps OBJECT-TYPE SYNTAX INTEGER { trapsoff(1), trapson(2) } ACCESS read-write STATUS optional DESCRIPTION "Controls sending of source address related traps." DEFVAL { trapson } ::= { device 27 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.52.1.2.1.1.27.0 | deviceSrcAddrTraps | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.52.1.2.1.1.2 | deviceMMACType | 1 | 1 | Indicates the type of MMAC. |
1.3.6.1.4.1.52.1.2.1.1.3 | deviceSlots | 1 | 1 | Number of available slots in this device including the IRM slot. |
1.3.6.1.4.1.52.1.2.1.1.4 | deviceOccupiedSlots | 1 | 1 | The slots that contain MIM boards. This field is bit encoded (eg. If a bit is set then that board is present. For example, a val… |
1.3.6.1.4.1.52.1.2.1.1.5 | devicePortsOn | 1 | 1 | A read will return the number of adminstratively ON ports for the device. A write of a 1 will administratively enable all the po… |
1.3.6.1.4.1.52.1.2.1.1.6 | deviceTotalPorts | 1 | 1 | The total number of ports in the MMAC. |
1.3.6.1.4.1.52.1.2.1.1.7 | deviceTotalPkts | 1 | 1 | The number of packets detected on all ports of this device. |
1.3.6.1.4.1.52.1.2.1.1.8 | deviceTotalErrors | 1 | 1 | The sum of all alignment, CRC, out-of-window collisions, runt, and giant errors detected by this device. |
1.3.6.1.4.1.52.1.2.1.1.9 | deviceTransmitColls, deviceTransmitColl | 1 | 1 | The number of transmit collisions detected by this device. |
1.3.6.1.4.1.52.1.2.1.1.10 | deviceRecColls | 1 | 1 | The number of receive collsions detected by this device. |
1.3.6.1.4.1.52.1.2.1.1.11 | deviceAlignErrs, deviceAligns, deviceAlign | 1 | 1 | The number of packets with alignment errors detected by this device. |
1.3.6.1.4.1.52.1.2.1.1.12 | deviceCRCErrs, deviceCRCs, deviceCRC | 1 | 1 | The number of packets with bad CRC detected by this device. |
1.3.6.1.4.1.52.1.2.1.1.13 | deviceRunts, deviceRunt | 1 | 1 | The number of runt frames detected by this device. |
1.3.6.1.4.1.52.1.2.1.1.14 | deviceOOWColls, deviceOOWColl | 1 | 1 | The number of out-of-window collisions detected by this device. |
1.3.6.1.4.1.52.1.2.1.1.15 | deviceNoResources | 1 | 1 | The number of no resource condtions detected by this device. |
1.3.6.1.4.1.52.1.2.1.1.16 | deviceRecBytes | 1 | 1 | The number of bytes detected on the network by this device. |
1.3.6.1.4.1.52.1.2.1.1.17 | deviceGiantFrames | 1 | 1 | The number of longer than 1518 byte packets detected by this device. |
1.3.6.1.4.1.52.1.2.1.1.18 | deviceRestart | 1 | 1 | A read will return 0. A set of 0 will restart the device. |
1.3.6.1.4.1.52.1.2.1.1.19 | deviceResetCounters, deviceResetCounter | 1 | 1 | A read will return 0. A set of 0 will reset all the counters for the device, boards and ports. |
1.3.6.1.4.1.52.1.2.1.1.20 | deviceRedundantCts | 1 | 1 | The number of redundant circuits available for use. |
1.3.6.1.4.1.52.1.2.1.1.21 | deviceDiscover | 1 | 1 | When this variable is set to 1 The following events occur: (1) The device sends a LINK-UP trap (2) The device sends a propriet… |
1.3.6.1.4.1.52.1.2.1.1.24 | deviceTimeBase | 1 | 1 | The number of seconds used as the interval for performing all of the rate alarm checks. The minimum is 10 secs. There isn't a ma… |
1.3.6.1.4.1.52.1.2.1.1.25 | deviceResetRedundancy | 1 | 1 | A read will return 0. A set of a 1 will reset redundancy for the entire box. |
1.3.6.1.4.1.52.1.2.1.1.26 | deviceSrcAddrAgingTime | 1 | 1 | The number of minutes that a source address is not detected before it is removed from the source address table. The minimum is 1… |
1.3.6.1.4.1.52.1.2.1.1.28 | deviceSrcAddrLocked | 1 | 1 | A set of 2 will disable all ports that support link status but do not have link active, or is segmented. The first source addres… |
1.3.6.1.4.1.52.1.2.1.1.29 | deviceEtherOccupiedSlots, deviceEnetBoardMap | 1 | 1 | The slots that contain Ethernet MIM boards. This field is bit encoded (e.g. If a bit is set then that board is present and is an … |
1.3.6.1.4.1.52.1.2.1.1.30 | deviceTROccupiedSlots, deviceTokenRingBoardMap | 1 | 1 | The slots that contain Token Ring MIM boards. This field is bit encoded (e.g. If a bit is set then that board is present and is a… |
1.3.6.1.4.1.52.1.2.1.1.31 | deviceFDDIOccupiedSlots, deviceFDDIBoardMap | 1 | 1 | The slots that contain FDDI MIM boards. This field is bit encoded (e.g. If a bit is set then that board is present and is a FDDI … |
1.3.6.1.4.1.52.1.2.1.1.32 | deviceRestoreDefaults | 1 | 1 | A get will return 0. A set of 0 will restore all of battery backed RAM to factory defaults, with the execption of the IP address,… |
1.3.6.1.4.1.52.1.2.1.1.33 | deviceActiveUsers | 1 | 1 | The number of active users seen on this device. |
1.3.6.1.4.1.52.1.2.1.1.34 | deviceOSIFrames | 1 | 1 | The number of frames with OSI protocol seen by this device. |
1.3.6.1.4.1.52.1.2.1.1.35 | deviceNovellFrames | 1 | 1 | The number of frames with NOVELL protocol seen by this device. |
1.3.6.1.4.1.52.1.2.1.1.36 | deviceBanyanFrames | 1 | 1 | The number of frames with BANYAN protocol seen by this device. |
1.3.6.1.4.1.52.1.2.1.1.37 | deviceDECNetFrames | 1 | 1 | The number of frames with DECNET protocol seen by this device. |
1.3.6.1.4.1.52.1.2.1.1.38 | deviceXNSFrames | 1 | 1 | The number of frames with XNS protocol seen by this device. |
1.3.6.1.4.1.52.1.2.1.1.39 | deviceIPFrames | 1 | 1 | The number of frames with TCPIP protocol seen by this device. |
1.3.6.1.4.1.52.1.2.1.1.40 | deviceCtronFrames | 1 | 1 | The number of frames with Cabletron protocol seen by this device. |
1.3.6.1.4.1.52.1.2.1.1.41 | deviceAppletalkFrames | 1 | 1 | The number of frames with Appletalk protocol seen by this device. |
1.3.6.1.4.1.52.1.2.1.1.42 | deviceOtherFrames | 1 | 1 | The number of frames seen by this device, that do not fall into any of the previously listed protocol catagories. |
1.3.6.1.4.1.52.1.2.1.1.43 | device64To127Frames | 1 | 1 | The number of frames seen by this device, with frame sizes between 64 and 127 bytes. |
1.3.6.1.4.1.52.1.2.1.1.44 | device128To255Frames | 1 | 1 | The number of frames seen by this device, with frame sizes between 128 and 255 bytes. |
1.3.6.1.4.1.52.1.2.1.1.45 | device256To511Frames | 1 | 1 | The number of frames seen by this device, with frame sizes between 256 and 511 bytes. |
1.3.6.1.4.1.52.1.2.1.1.46 | device512To1023Frames | 1 | 1 | The number of frames seen by this device, with frame sizes between 512 and 1023 bytes. |
1.3.6.1.4.1.52.1.2.1.1.47 | device1024To1518Frames | 1 | 1 | The number of frames seen by this device, with frame sizes between 1024 and 1518 bytes. |
1.3.6.1.4.1.52.1.2.1.1.48 | deviceBroadPkts | 1 | 1 | The sum of all of the broadcast packets detected on all ports of this device. |
1.3.6.1.4.1.52.1.2.1.1.49 | deviceMultPkts | 1 | 1 | The sum of all of the multicast packets detected on all ports of this device. |
1.3.6.1.4.1.52.1.2.1.1.51 | deviceThdPartyOccupiedSlots | 1 | 1 | The slots that contain Third Party MIM boards. This field is bit encoded (eg. if a bit is set then that board is present and is… |
1.3.6.1.4.1.52.1.2.1.1.52 | deviceImimOccupiedSlots | 1 | 1 | The slots that contain IMIM boards. This field is bit encoded (eg. if a bit is set then that board is present and is an IMIM). … |
1.3.6.1.4.1.52.1.2.1.1.54 | deviceLinkTraps | 1 | 1 | Controls sending of link related traps. |
1.3.6.1.4.1.52.1.2.1.1.55 | deviceSegTraps | 1 | 1 | Controls sending of seg related traps. |
1.3.6.1.4.1.52.1.2.1.1.56 | ctIPDefaultFrameType | 1 | 1 | Defines the default frame type that will be used by the device. A device will understand both frame types and will respond based… |
1.3.6.1.4.1.52.1.2.1.1.57 | deviceSrcAddrType | 1 | 1 | Selects the hashing algorithm of source addresses, DEC or IP |