A set of 2 will disable all ports that support link status but do not have
link active, or is segmented. The first source address seen on each of the
remaining enabled ports, that have the type of station, will be the only
address allowed through that port. If any other address is seen the port
will be disabled.
Parsed from file rrev2-mib.mib.txt
Company: None
Module: REPEATER-MIB-2
A set of 2 will disable all ports that support link status but do not have
link active, or is segmented. The first source address seen on each of the
remaining enabled ports, that have the type of station, will be the only
address allowed through that port. If any other address is seen the port
will be disabled.
Parsed from file REPEATER-MIB-2.mib
Module: REPEATER-MIB-2
deviceSrcAddrLocked OBJECT-TYPE SYNTAX INTEGER { lockoff(1), lockon(2) } ACCESS read-write STATUS optional DESCRIPTION "A set of 2 will disable all ports that support link status but do not have link active, or is segmented. The first source address seen on each of the remaining enabled ports, that have the type of station, will be the only address allowed through that port. If any other address is seen the port will be disabled." DEFVAL { lockoff } ::= { device 28 }
Vendor: Enterasys Networks Inc.
Module: IRM3-MIB
[Automatically extracted from oidview.com]
deviceSrcAddrLocked OBJECT-TYPE SYNTAX INTEGER { lockoff(1), lockon(2) } ACCESS read-write STATUS optional DESCRIPTION "A set of 2 will disable all ports that support link status but do not have link active, or is segmented. The first source address seen on each of the remaining enabled ports, that have the type of station, will be the only address allowed through that port. If any other address is seen the port will be disabled." DEFVAL { lockoff } ::= { device 28 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.1.2.1.1.28.0 | deviceSrcAddrLocked | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.1.2.1.1.2 | deviceMMACType | 1 | 1 | Indicates the type of MMAC. |
| 1.3.6.1.4.1.52.1.2.1.1.3 | deviceSlots | 1 | 1 | Number of available slots in this device including the IRM slot. |
| 1.3.6.1.4.1.52.1.2.1.1.4 | deviceOccupiedSlots | 1 | 1 | The slots that contain MIM boards. This field is bit encoded (eg. If a bit is set then that board is present. For example, a val… |
| 1.3.6.1.4.1.52.1.2.1.1.5 | devicePortsOn | 1 | 1 | A read will return the number of adminstratively ON ports for the device. A write of a 1 will administratively enable all the po… |
| 1.3.6.1.4.1.52.1.2.1.1.6 | deviceTotalPorts | 1 | 1 | The total number of ports in the MMAC. |
| 1.3.6.1.4.1.52.1.2.1.1.7 | deviceTotalPkts | 1 | 1 | The number of packets detected on all ports of this device. |
| 1.3.6.1.4.1.52.1.2.1.1.8 | deviceTotalErrors | 1 | 1 | The sum of all alignment, CRC, out-of-window collisions, runt, and giant errors detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.9 | deviceTransmitColls, deviceTransmitColl | 1 | 1 | The number of transmit collisions detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.10 | deviceRecColls | 1 | 1 | The number of receive collsions detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.11 | deviceAlignErrs, deviceAligns, deviceAlign | 1 | 1 | The number of packets with alignment errors detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.12 | deviceCRCErrs, deviceCRCs, deviceCRC | 1 | 1 | The number of packets with bad CRC detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.13 | deviceRunts, deviceRunt | 1 | 1 | The number of runt frames detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.14 | deviceOOWColls, deviceOOWColl | 1 | 1 | The number of out-of-window collisions detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.15 | deviceNoResources | 1 | 1 | The number of no resource condtions detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.16 | deviceRecBytes | 1 | 1 | The number of bytes detected on the network by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.17 | deviceGiantFrames | 1 | 1 | The number of longer than 1518 byte packets detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.18 | deviceRestart | 1 | 1 | A read will return 0. A set of 0 will restart the device. |
| 1.3.6.1.4.1.52.1.2.1.1.19 | deviceResetCounters, deviceResetCounter | 1 | 1 | A read will return 0. A set of 0 will reset all the counters for the device, boards and ports. |
| 1.3.6.1.4.1.52.1.2.1.1.20 | deviceRedundantCts | 1 | 1 | The number of redundant circuits available for use. |
| 1.3.6.1.4.1.52.1.2.1.1.21 | deviceDiscover | 1 | 1 | When this variable is set to 1 The following events occur: (1) The device sends a LINK-UP trap (2) The device sends a propriet… |
| 1.3.6.1.4.1.52.1.2.1.1.24 | deviceTimeBase | 1 | 1 | The number of seconds used as the interval for performing all of the rate alarm checks. The minimum is 10 secs. There isn't a ma… |
| 1.3.6.1.4.1.52.1.2.1.1.25 | deviceResetRedundancy | 1 | 1 | A read will return 0. A set of a 1 will reset redundancy for the entire box. |
| 1.3.6.1.4.1.52.1.2.1.1.26 | deviceSrcAddrAgingTime | 1 | 1 | The number of minutes that a source address is not detected before it is removed from the source address table. The minimum is 1… |
| 1.3.6.1.4.1.52.1.2.1.1.27 | deviceSrcAddrTraps | 1 | 1 | Controls sending of source address related traps. |
| 1.3.6.1.4.1.52.1.2.1.1.29 | deviceEtherOccupiedSlots, deviceEnetBoardMap | 1 | 1 | The slots that contain Ethernet MIM boards. This field is bit encoded (e.g. If a bit is set then that board is present and is an … |
| 1.3.6.1.4.1.52.1.2.1.1.30 | deviceTROccupiedSlots, deviceTokenRingBoardMap | 1 | 1 | The slots that contain Token Ring MIM boards. This field is bit encoded (e.g. If a bit is set then that board is present and is a… |
| 1.3.6.1.4.1.52.1.2.1.1.31 | deviceFDDIOccupiedSlots, deviceFDDIBoardMap | 1 | 1 | The slots that contain FDDI MIM boards. This field is bit encoded (e.g. If a bit is set then that board is present and is a FDDI … |
| 1.3.6.1.4.1.52.1.2.1.1.32 | deviceRestoreDefaults | 1 | 1 | A get will return 0. A set of 0 will restore all of battery backed RAM to factory defaults, with the execption of the IP address,… |
| 1.3.6.1.4.1.52.1.2.1.1.33 | deviceActiveUsers | 1 | 1 | The number of active users seen on this device. |
| 1.3.6.1.4.1.52.1.2.1.1.34 | deviceOSIFrames | 1 | 1 | The number of frames with OSI protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.35 | deviceNovellFrames | 1 | 1 | The number of frames with NOVELL protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.36 | deviceBanyanFrames | 1 | 1 | The number of frames with BANYAN protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.37 | deviceDECNetFrames | 1 | 1 | The number of frames with DECNET protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.38 | deviceXNSFrames | 1 | 1 | The number of frames with XNS protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.39 | deviceIPFrames | 1 | 1 | The number of frames with TCPIP protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.40 | deviceCtronFrames | 1 | 1 | The number of frames with Cabletron protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.41 | deviceAppletalkFrames | 1 | 1 | The number of frames with Appletalk protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.42 | deviceOtherFrames | 1 | 1 | The number of frames seen by this device, that do not fall into any of the previously listed protocol catagories. |
| 1.3.6.1.4.1.52.1.2.1.1.43 | device64To127Frames | 1 | 1 | The number of frames seen by this device, with frame sizes between 64 and 127 bytes. |
| 1.3.6.1.4.1.52.1.2.1.1.44 | device128To255Frames | 1 | 1 | The number of frames seen by this device, with frame sizes between 128 and 255 bytes. |
| 1.3.6.1.4.1.52.1.2.1.1.45 | device256To511Frames | 1 | 1 | The number of frames seen by this device, with frame sizes between 256 and 511 bytes. |
| 1.3.6.1.4.1.52.1.2.1.1.46 | device512To1023Frames | 1 | 1 | The number of frames seen by this device, with frame sizes between 512 and 1023 bytes. |
| 1.3.6.1.4.1.52.1.2.1.1.47 | device1024To1518Frames | 1 | 1 | The number of frames seen by this device, with frame sizes between 1024 and 1518 bytes. |
| 1.3.6.1.4.1.52.1.2.1.1.48 | deviceBroadPkts | 1 | 1 | The sum of all of the broadcast packets detected on all ports of this device. |
| 1.3.6.1.4.1.52.1.2.1.1.49 | deviceMultPkts | 1 | 1 | The sum of all of the multicast packets detected on all ports of this device. |
| 1.3.6.1.4.1.52.1.2.1.1.51 | deviceThdPartyOccupiedSlots | 1 | 1 | The slots that contain Third Party MIM boards. This field is bit encoded (eg. if a bit is set then that board is present and is… |
| 1.3.6.1.4.1.52.1.2.1.1.52 | deviceImimOccupiedSlots | 1 | 1 | The slots that contain IMIM boards. This field is bit encoded (eg. if a bit is set then that board is present and is an IMIM). … |
| 1.3.6.1.4.1.52.1.2.1.1.54 | deviceLinkTraps | 1 | 1 | Controls sending of link related traps. |
| 1.3.6.1.4.1.52.1.2.1.1.55 | deviceSegTraps | 1 | 1 | Controls sending of seg related traps. |
| 1.3.6.1.4.1.52.1.2.1.1.56 | ctIPDefaultFrameType | 1 | 1 | Defines the default frame type that will be used by the device. A device will understand both frame types and will respond based… |
| 1.3.6.1.4.1.52.1.2.1.1.57 | deviceSrcAddrType | 1 | 1 | Selects the hashing algorithm of source addresses, DEC or IP |