The number of sampling periods that have elapsed
during the current test run.
Parsed from file ctwan-mib.mib.txt
Company: None
Module: CTRON-WAN-MIB
The number of sampling periods that have elapsed
during the current test run.
Parsed from file CTRON-WAN-MIB.mib
Module: CTRON-WAN-MIB
wanDs1ExtensionsBertNumPeriods OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of sampling periods that have elapsed during the current test run." ::= { wanDs1ExtensionsEntry 16 }
Vendor: Enterasys Networks Inc.
Module: CTRON-WAN-MIB
[Automatically extracted from oidview.com]
wanDs1ExtensionsBertNumPeriods OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of sampling periods that have elapsed during the current test run." ::= { wanDs1ExtensionsEntry 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.1 | wanDs1ExtensionsEntryIndex | 0 | 0 | A unique value for each ds1 physical port on the platform. |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.2 | wanDs1ExtensionsNumInterfaces | 0 | 0 | The number of interfaces on this physical port. This number indicates the number of entries this physical port uses in the ifTabl… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.3 | wanDs1ExtensionsToggleFracTable | 0 | 0 | Setting this object to 1 will cause the Ds1 Fractional Table to be updated with the new values, as entered. Setting this object t… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.4 | wanDs1ExtensionsLineBuildOut | 0 | 0 | The line build out setting for this ds1 physical port. Unknown indicates that the setting is neither readable or writable. |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.5 | wanDs1ExtensionsCFADuration | 0 | 0 | The length of time (in seconds), that the ds1 port will remain in the Carrier Failure Alarm state after the alarm condition has c… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.6 | wanDs1ExtensionsDIEnable | 0 | 0 | Enables or disables Drop and Insert functionality on a D/I WPIM. If enabled, all zero assigned timeslots will designate D/I inte… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.7 | wanDs1ExtensionsTotalValidIntervals | 0 | 0 | The number of previous intervals for which valid data was collected for the DS1 mib, which is currently RFC1406. This counte… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.8 | wanDs1ExtensionsBertTestMode | 0 | 0 | This object is used to request that a type of process be in control of the testing function. This is used to differentiate betwee… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.9 | wanDs1ExtensionsBertRun | 0 | 0 | Controls the sending of test data over this physical port. The data is a pattern described by wanDs1ExtensionsBertTestPattern. |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.10 | wanDs1ExtensionsBertCurrentResults | 0 | 0 | Indicates the results of the testing for the last completed sampling period. A non-negative number is the error rate in bits per… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.11 | wanDs1ExtensionsBertCumulativeResults | 0 | 0 | Indicates the total number of errors since the testing was enabled. It is not a rate. |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.12 | wanDs1ExtensionsBertPeakResults | 0 | 0 | Indicates the highest value of wanDs1ExtensionsBertCurrentResults since the testing was enabled. A non-negative number is the er… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.13 | wanDs1ExtensionsBertAverageResult | 0 | 0 | Indicates the average value of wanDs1ExtensionsBertCurrentResults since the testing was enabled. A non-negative number is the er… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.14 | wanDs1ExtensionsBertTestPattern | 0 | 0 | This object is used to specify the pattern of the test data. |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.15 | wanDs1ExtensionsBertSamplePeriod | 0 | 0 | This object is the duration of time in seconds at which the current test results will be periodically written to wanDs1Extensions… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.17 | wanDs1ExtensionsBertTestTraps | 0 | 0 | This object is used to enable or disable the sending of a trap at the conclusion of the measurement period. The trap will contain… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.18 | wanDs1ExtensionsBertDataStatus | 0 | 0 | This object provides the operating status of the transmission of test data packets. |