Setting this object to 1 will cause the Ds1 Fractional Table
to be updated with the new values, as entered.
Setting this object to 2, will cause the Ds1 Fractional Table
to view as the table being entered.
Setting this object to 3, will cause the Ds1 Fractional Table
to be the table that is currently in use, regardless of
any changes being entered.
Setting this object to 4, will cause any changes that have
been made to the Ds1 Fractional Table since the last
update-table to be deleted.
For physical ports of type synchronous, this object will
have no affect, and will always return a 1.
Parsed from file ctwan-mib.mib.txt
Company: None
Module: CTRON-WAN-MIB
Setting this object to 1 will cause the Ds1 Fractional Table
to be updated with the new values, as entered.
Setting this object to 2, will cause the Ds1 Fractional Table
to view as the table being entered.
Setting this object to 3, will cause the Ds1 Fractional Table
to be the table that is currently in use, regardless of
any changes being entered.
Setting this object to 4, will cause any changes that have
been made to the Ds1 Fractional Table since the last
update-table to be deleted.
For physical ports of type synchronous, this object will
have no affect, and will always return a 1.
Parsed from file CTRON-WAN-MIB.mib
Module: CTRON-WAN-MIB
wanDs1ExtensionsToggleFracTable OBJECT-TYPE SYNTAX INTEGER { update-table(1), display-new(2), display-old(3), restore-old(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to 1 will cause the Ds1 Fractional Table to be updated with the new values, as entered. Setting this object to 2, will cause the Ds1 Fractional Table to view as the table being entered. Setting this object to 3, will cause the Ds1 Fractional Table to be the table that is currently in use, regardless of any changes being entered. Setting this object to 4, will cause any changes that have been made to the Ds1 Fractional Table since the last update-table to be deleted. For physical ports of type synchronous, this object will have no affect, and will always return a 1." REFERENCE "rfc-1406" ::= { wanDs1ExtensionsEntry 3 }
Vendor: Enterasys Networks Inc.
Module: CTRON-WAN-MIB
[Automatically extracted from oidview.com]
wanDs1ExtensionsToggleFracTable OBJECT-TYPE SYNTAX INTEGER { update-table(1), display-new(2), display-old(3), restore-old(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to 1 will cause the Ds1 Fractional Table to be updated with the new values, as entered. Setting this object to 2, will cause the Ds1 Fractional Table to view as the table being entered. Setting this object to 3, will cause the Ds1 Fractional Table to be the table that is currently in use, regardless of any changes being entered. Setting this object to 4, will cause any changes that have been made to the Ds1 Fractional Table since the last update-table to be deleted. For physical ports of type synchronous, this object will have no affect, and will always return a 1." REFERENCE "rfc-1406" ::= { wanDs1ExtensionsEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.1 | wanDs1ExtensionsEntryIndex | 0 | 0 | A unique value for each ds1 physical port on the platform. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.2 | wanDs1ExtensionsNumInterfaces | 0 | 0 | The number of interfaces on this physical port. This number indicates the number of entries this physical port uses in the ifTabl… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.4 | wanDs1ExtensionsLineBuildOut | 0 | 0 | The line build out setting for this ds1 physical port. Unknown indicates that the setting is neither readable or writable. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.5 | wanDs1ExtensionsCFADuration | 0 | 0 | The length of time (in seconds), that the ds1 port will remain in the Carrier Failure Alarm state after the alarm condition has c… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.6 | wanDs1ExtensionsDIEnable | 0 | 0 | Enables or disables Drop and Insert functionality on a D/I WPIM. If enabled, all zero assigned timeslots will designate D/I inte… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.7 | wanDs1ExtensionsTotalValidIntervals | 0 | 0 | The number of previous intervals for which valid data was collected for the DS1 mib, which is currently RFC1406. This counte… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.8 | wanDs1ExtensionsBertTestMode | 0 | 0 | This object is used to request that a type of process be in control of the testing function. This is used to differentiate betwee… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.9 | wanDs1ExtensionsBertRun | 0 | 0 | Controls the sending of test data over this physical port. The data is a pattern described by wanDs1ExtensionsBertTestPattern. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.10 | wanDs1ExtensionsBertCurrentResults | 0 | 0 | Indicates the results of the testing for the last completed sampling period. A non-negative number is the error rate in bits per… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.11 | wanDs1ExtensionsBertCumulativeResults | 0 | 0 | Indicates the total number of errors since the testing was enabled. It is not a rate. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.12 | wanDs1ExtensionsBertPeakResults | 0 | 0 | Indicates the highest value of wanDs1ExtensionsBertCurrentResults since the testing was enabled. A non-negative number is the er… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.13 | wanDs1ExtensionsBertAverageResult | 0 | 0 | Indicates the average value of wanDs1ExtensionsBertCurrentResults since the testing was enabled. A non-negative number is the er… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.14 | wanDs1ExtensionsBertTestPattern | 0 | 0 | This object is used to specify the pattern of the test data. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.15 | wanDs1ExtensionsBertSamplePeriod | 0 | 0 | This object is the duration of time in seconds at which the current test results will be periodically written to wanDs1Extensions… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.16 | wanDs1ExtensionsBertNumPeriods | 0 | 0 | The number of sampling periods that have elapsed during the current test run. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.17 | wanDs1ExtensionsBertTestTraps | 0 | 0 | This object is used to enable or disable the sending of a trap at the conclusion of the measurement period. The trap will contain… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.18 | wanDs1ExtensionsBertDataStatus | 0 | 0 | This object provides the operating status of the transmission of test data packets. |