The number of previous intervals for which
valid data was collected for the DS1 mib, which
is currently RFC1406. This counter is similar to
RFC1406 dsx1ValidIntervals except that the count
represents the total number of complete 15 minute
intervals since the ds1 interface has been online,
and does not stop at the 24 hour period.
Parsed from file ctwan-mib.mib.txt
Company: None
Module: CTRON-WAN-MIB
The number of previous intervals for which
valid data was collected for the DS1 mib, which
is currently RFC1406. This counter is similar to
RFC1406 dsx1ValidIntervals except that the count
represents the total number of complete 15 minute
intervals since the ds1 interface has been online,
and does not stop at the 24 hour period.
Parsed from file CTRON-WAN-MIB.mib
Module: CTRON-WAN-MIB
wanDs1ExtensionsTotalValidIntervals OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of previous intervals for which valid data was collected for the DS1 mib, which is currently RFC1406. This counter is similar to RFC1406 dsx1ValidIntervals except that the count represents the total number of complete 15 minute intervals since the ds1 interface has been online, and does not stop at the 24 hour period." ::= { wanDs1ExtensionsEntry 7 }
Vendor: Enterasys Networks Inc.
Module: CTRON-WAN-MIB
[Automatically extracted from oidview.com]
wanDs1ExtensionsTotalValidIntervals OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of previous intervals for which valid data was collected for the DS1 mib, which is currently RFC1406. This counter is similar to RFC1406 dsx1ValidIntervals except that the count represents the total number of complete 15 minute intervals since the ds1 interface has been online, and does not stop at the 24 hour period." ::= { wanDs1ExtensionsEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.1 | wanDs1ExtensionsEntryIndex | 0 | 0 | A unique value for each ds1 physical port on the platform. |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.2 | wanDs1ExtensionsNumInterfaces | 0 | 0 | The number of interfaces on this physical port. This number indicates the number of entries this physical port uses in the ifTabl… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.3 | wanDs1ExtensionsToggleFracTable | 0 | 0 | Setting this object to 1 will cause the Ds1 Fractional Table to be updated with the new values, as entered. Setting this object t… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.4 | wanDs1ExtensionsLineBuildOut | 0 | 0 | The line build out setting for this ds1 physical port. Unknown indicates that the setting is neither readable or writable. |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.5 | wanDs1ExtensionsCFADuration | 0 | 0 | The length of time (in seconds), that the ds1 port will remain in the Carrier Failure Alarm state after the alarm condition has c… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.6 | wanDs1ExtensionsDIEnable | 0 | 0 | Enables or disables Drop and Insert functionality on a D/I WPIM. If enabled, all zero assigned timeslots will designate D/I inte… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.8 | wanDs1ExtensionsBertTestMode | 0 | 0 | This object is used to request that a type of process be in control of the testing function. This is used to differentiate betwee… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.9 | wanDs1ExtensionsBertRun | 0 | 0 | Controls the sending of test data over this physical port. The data is a pattern described by wanDs1ExtensionsBertTestPattern. |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.10 | wanDs1ExtensionsBertCurrentResults | 0 | 0 | Indicates the results of the testing for the last completed sampling period. A non-negative number is the error rate in bits per… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.11 | wanDs1ExtensionsBertCumulativeResults | 0 | 0 | Indicates the total number of errors since the testing was enabled. It is not a rate. |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.12 | wanDs1ExtensionsBertPeakResults | 0 | 0 | Indicates the highest value of wanDs1ExtensionsBertCurrentResults since the testing was enabled. A non-negative number is the er… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.13 | wanDs1ExtensionsBertAverageResult | 0 | 0 | Indicates the average value of wanDs1ExtensionsBertCurrentResults since the testing was enabled. A non-negative number is the er… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.14 | wanDs1ExtensionsBertTestPattern | 0 | 0 | This object is used to specify the pattern of the test data. |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.15 | wanDs1ExtensionsBertSamplePeriod | 0 | 0 | This object is the duration of time in seconds at which the current test results will be periodically written to wanDs1Extensions… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.16 | wanDs1ExtensionsBertNumPeriods | 0 | 0 | The number of sampling periods that have elapsed during the current test run. |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.17 | wanDs1ExtensionsBertTestTraps | 0 | 0 | This object is used to enable or disable the sending of a trap at the conclusion of the measurement period. The trap will contain… |
1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.18 | wanDs1ExtensionsBertDataStatus | 0 | 0 | This object provides the operating status of the transmission of test data packets. |