The object indicates the current operation. A set to the object
triggers the operation to be performed. If an operation is
in progress a set operation to this object causes a generic
error. format-card formats the card in the given socket.
tftp-upload describes the upload of a file from a TFTP host
to the system. load-config reads the file described in
flashOperationSrcFileName into the system. save-config sends the
config to the TFTP host. Note that the TFTP host must allow write
operations to take advantage of this feature.
Parsed from file flash.mib.txt
Company: None
Module: ASCEND-FLASH-MIB
The object indicates the current operation. A set to the object
triggers the operation to be performed. If an operation is
in progress a set operation to this object causes a generic
error. format-card formats the card in the given socket.
tftp-upload describes the upload of a file from a TFTP host
to the system. load-config reads the file described in
flashOperationSrcFileName into the system. save-config sends the
config to the TFTP host. Note that the TFTP host must allow write
operations to take advantage of this feature.
Parsed from file ASCEND-FLASH-MIB.mib
Module: ASCEND-FLASH-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-FLASH-MIB
[Automatically extracted from oidview.com]
flashOperationCommand OBJECT-TYPE SYNTAX INTEGER { format-card(1), tftp-upload(2), no-command(3), load-config(4), save-config(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The object indicates the current operation. A set to the object triggers the operation to be performed. If an operation is in progress a set operation to this object causes a generic error. format-card formats the card in the given socket. tftp-upload describes the upload of a file from a TFTP host to the system. load-config reads the file described in flashOperationSrcFileName into the system. save-config sends the config to the TFTP host. Note that the TFTP host must allow write operations to take advantage of this feature." ::= { flashOperation 2 }
flashOperationCommand OBJECT-TYPE SYNTAX INTEGER { format-card(1), tftp-upload(2), no-command(3), load-config(4), save-config(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The object indicates the current operation. A set to the object triggers the operation to be performed. If an operation is in progress a set operation to this object causes a generic error. format-card formats the card in the given socket. tftp-upload describes the upload of a file from a TFTP host to the system. load-config reads the file described in flashOperationSrcFileName into the system. save-config sends the config to the TFTP host. Note that the TFTP host must allow write operations to take advantage of this feature." ::= { flashOperation 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.529.22.3.2.0 | flashOperationCommand | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.529.22.3.1 | flashOperationStatus | 1 | 1 | Status of the current operation in progress or the appropiate error indication for the last operation performed. If the operatio… |
1.3.6.1.4.1.529.22.3.3 | flashOperationHost | 1 | 1 | Ip address of the TFTP host associated with an operation. If an operation is in progress a set operation to this object causes a… |
1.3.6.1.4.1.529.22.3.4 | flashOperationDestFileName | 1 | 1 | Destination filename for operations. For a save operation this is the filename to be written to on the TFTP host. For load operat… |
1.3.6.1.4.1.529.22.3.5 | flashOperationSrcFileName | 1 | 1 | Source filename for operations. For a save operation this is the filename on the system. For load operations this is the filename… |
1.3.6.1.4.1.529.22.3.7 | flashOperationSocket | 1 | 1 | The flash socket to operate on. If an operation is in progress a set operation to this object causes a generic error. |
1.3.6.1.4.1.529.22.3.8 | flashOperationTftpPort | 1 | 1 | This object defines the port # to use on the remote system when starting a TFTP operation using a flashOperationCommand. The def… |
1.3.6.1.4.1.529.22.3.9 | flashOperationEncryptPassword | 1 | 1 | Password to generate key for encryption/decryption. Supported from TAOS 9.0 onwards |
1.3.6.1.4.1.529.22.3.10 | flashOperationEncryptMethod | 1 | 1 | Method of encryption. If flashOperationEncryptPassword is balnk, this field is ignored. Supported from TAOS 9.0 onwards |