This is the last error at the Agent level or Tunnel creation
that was received from the Peer Agent. To clear the field and
atmpAgentRecvErrorFrom do a set with the value no-error(1)
Parsed from file atmp.mib.txt
Company: None
Module: ASCEND-ATMP-MIB
This is the last error at the Agent level or Tunnel creation
that was received from the Peer Agent. To clear the field and
atmpAgentRecvErrorFrom do a set with the value no-error(1)
Parsed from file ASCEND-ATMP-MIB.mib
Module: ASCEND-ATMP-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-ATMP-MIB
[Automatically extracted from oidview.com]
atmpLastErrorRecv OBJECT-TYPE SYNTAX INTEGER { no-error( 1 ), fa-auth-failed( 2 ), ha-atmp-disabled( 3 ), too-many-tunnel( 4 ), err-parameter( 5 ), bad-tunnel( 6 ), err-timeout( 7 ), hn-unreachable( 8 ) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the last error at the Agent level or Tunnel creation that was received from the Peer Agent. To clear the field and atmpAgentRecvErrorFrom do a set with the value no-error(1)" ::= { atmpGroup 9 }
atmpLastErrorRecv OBJECT-TYPE SYNTAX INTEGER { no-error( 1 ), fa-auth-failed( 2 ), ha-atmp-disabled( 3 ), too-many-tunnel( 4 ), err-parameter( 5 ), bad-tunnel( 6 ), err-timeout( 7 ), hn-unreachable( 8 ) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the last error at the Agent level or Tunnel creation that was received from the Peer Agent. To clear the field and atmpAgentRecvErrorFrom do a set with the value no-error(1)" ::= { atmpGroup 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.529.24.9.0 | atmpLastErrorRecv | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.529.24.1 | atmpAgentMode | 1 | 1 | The type of ATMP Agent. |
1.3.6.1.4.1.529.24.2 | atmpAgentType | 1 | 1 | The type of ATMP HA Agent. ha-router means the HA will route the tunneled data to other networks. ha-gateway means the HA deliver… |
1.3.6.1.4.1.529.24.3 | atmpAgentUDPPort | 1 | 1 | UDP port number to be used for ATMP. |
1.3.6.1.4.1.529.24.4 | atmpAgentGreMtu | 1 | 1 | The maximum IP packet size that can be transmitted to a peer agent without performing fragmentation. The value 0 means this featu… |
1.3.6.1.4.1.529.24.5 | atmpAgentForceFragmentation | 1 | 1 | To force fragmentation of large IP frames before they are sent to the peer agent even if the packet has the DF bit set. NOTE: thi… |
1.3.6.1.4.1.529.24.6 | atmpAgentHAIdleLimit | 1 | 1 | Time in minutes that the HA will allow a tunnel to have no traffic before tearing it down. The value 0 means this option is disab… |
1.3.6.1.4.1.529.24.7 | atmpLastErrorGenerated | 1 | 1 | This is the last error at the Agent level or Tunnel creation that was generated by the Agent. To clear the field and atmpAgentSen… |
1.3.6.1.4.1.529.24.8 | atmpAgentSentErrorTo | 1 | 1 | The IP Address of the agent that the generated was sent to. Clearing atmpLastErrorGenerated also clears this field. |
1.3.6.1.4.1.529.24.10 | atmpAgentRecvErrorFrom | 1 | 1 | The IP Address of the agent that the last error received was from. Clearing atmpLastErrorRecv also clears this field. |
1.3.6.1.4.1.529.24.11 | atmpEnableAtmpTraps | 1 | 1 | Enable the atmp traps. |
1.3.6.1.4.1.529.24.12 | atmpAgentNumberFATunnels | 1 | 1 | The number of FA tunnels. |
1.3.6.1.4.1.529.24.13 | atmpAgentNumberHATunnels | 1 | 1 | The number of HA tunnels. |
1.3.6.1.4.1.529.24.14 | atmpAgentNumberLocalTunnels | 1 | 1 | The number of Local client mode tunnels. |
1.3.6.1.4.1.529.24.15 | atmpAgentTunnelHighWater | 1 | 1 | The high water mark on created ATMP tunnels. |
1.3.6.1.4.1.529.24.16 | atmpTunnelTable | 1 | 26 | A list of ATMP tunnel entries. |