aislcscIntHighthreshCelsius
View at oid-info.com
The upper threshold for the internal temperature probe,
in degrees Celsius. When the temperature rises above this
value, an SNMP trap is sent.
Parsed from file aiSLCSysCfg.mib.txt
Company: None
Module: AISLCSYSCFG-MIB
The upper threshold for the internal temperature probe,
in degrees Celsius. When the temperature rises above this
value, an SNMP trap is sent.
Parsed from file AISLCSYSCFG-MIB.mib
Module: AISLCSYSCFG-MIB
Vendor: Applied Innovation Inc.
Module: AISLCSYSCFG-MIB
[Automatically extracted from oidview.com]
aislcscIntHighThreshCelsius OBJECT-TYPE SYNTAX INTEGER (-54..124) UNITS "degrees Celsius" MAX-ACCESS read-write STATUS current DESCRIPTION "The upper threshold for the internal temperature probe, in degrees Celsius. When the temperature rises above this value, an SNMP trap is sent." ::= {aiSLCSysCfg 17}
aislcscIntHighThreshCelsius OBJECT-TYPE SYNTAX INTEGER (-54..124) UNITS "degrees Celsius" MAX-ACCESS read-write STATUS current DESCRIPTION "The upper threshold for the internal temperature probe, in degrees Celsius. When the temperature rises above this value, an SNMP trap is sent." ::= {aiSLCSysCfg 17}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.539.21.17.0 | aislcscIntHighThreshCelsius | 0 | 0 | aislcscIntHighthreshCelsius |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.539.21.1 | aislcscSystemPrompt | 1 | 1 | Prompt for login shells. Maximum length is 80 characters. |
| 1.3.6.1.4.1.539.21.2 | aislcscShellMinLogLevel | 1 | 1 | Minimum message severity which will be logged to a shell connection. |
| 1.3.6.1.4.1.539.21.3 | aislcscFtpPort | 1 | 1 | TCP port for accepting FTP connections. |
| 1.3.6.1.4.1.539.21.4 | aislcscTelnetPort | 1 | 1 | TCP port for accepting Telnet connections. |
| 1.3.6.1.4.1.539.21.5 | aiSLCSysCfgManagerTable | 1 | 4 | Table of IP addresses to which SNMP traps will be sent, indexed by an integer. |
| 1.3.6.1.4.1.539.21.6 | aislcscReadCommunity | 1 | 1 | SNMP community string for read-only access. |
| 1.3.6.1.4.1.539.21.7 | aislcscWriteCommunity | 1 | 1 | SNMP community string for read-write access. |
| 1.3.6.1.4.1.539.21.8 | aislcsctl1SourceID | 1 | 1 | TL1 source identifier. Maximum length is 20 characters. |
| 1.3.6.1.4.1.539.21.9 | aislcsctl1LogonRequired | 1 | 1 | Indicates whether or not an ACT-USER command is required for TL1 access. |
| 1.3.6.1.4.1.539.21.10 | aislcsctl1NumBadLogons | 1 | 1 | The number of failed TL1 logons that have occurred since the last successful logon. |
| 1.3.6.1.4.1.539.21.11 | aislcscExtProbeStatus | 1 | 1 | This is the state of the external temperature probe. It is either available or unavailable. |
| 1.3.6.1.4.1.539.21.12 | aislcscExtLowThreshCelsius | 1 | 1 | The lower threshold for the external temperature probe, in degrees Celsius. When the temperature drops below this value, an SNMP… |
| 1.3.6.1.4.1.539.21.13 | aislcscExtHighThreshCelsius | 1 | 1 | aislcscExtHighthreshCelsius |
| 1.3.6.1.4.1.539.21.14 | aislcscExtTempCelsius | 1 | 1 | The current external temperature (Celsius). |
| 1.3.6.1.4.1.539.21.15 | aislcscIntProbeStatus | 1 | 1 | This is the state of the internal temperature probe. It is either available or unavailable. |
| 1.3.6.1.4.1.539.21.16 | aislcscIntLowThreshCelsius | 1 | 1 | The lower threshold for the internal temperature probe, in degrees Celsius. When the temperature drops below this value, an SNMP… |
| 1.3.6.1.4.1.539.21.18 | aislcscIntTempCelsius | 1 | 1 | The current internal temperature (Celsius). |
| 1.3.6.1.4.1.539.21.19 | aislcscExceededThresholdValue | 1 | 1 | The temperature sent with the last trap (Celsius). |
| 1.3.6.1.4.1.539.21.20 | aiSLCSysCfgKeepAliveTable | 1 | 7 | Table of IP addresses which will be pinged periodically. |
| 1.3.6.1.4.1.539.21.21 | aislcscActiveConfigName | 1 | 1 | Name of the active configuration file. Maximum length is 255 characters; additional restrictions are system-dependent. |
| 1.3.6.1.4.1.539.21.22 | aislcscActiveConfigCRC | 1 | 1 | 32-bit CRC of the active configuration file. |
| 1.3.6.1.4.1.539.21.23 | aislcscSoftwareUpdateName | 1 | 1 | To update the system software, set this object to the name of the new image file, and monitor aislcscSoftwareUpdateStatus until i… |
| 1.3.6.1.4.1.539.21.24 | aislcscSoftwareUpdateStatus | 1 | 1 | None |
| 1.3.6.1.4.1.539.21.25 | aislcscResetSystem | 1 | 1 | When read, this object is always none(1). Setting none(1) has no effect. Setting coldStart(2) reboots the system. |
| 1.3.6.1.4.1.539.21.26 | aislcscDiscPowerSupplyStatus | 1 | 1 | Status of the power supply. okay(1) or trouble(2). When the SLC is booted, this indicates okay(1) until the software determines … |
| 1.3.6.1.4.1.539.21.27 | aislcsc48VSupplyAStatus | 1 | 1 | Status of the 'A' 48V power supply. |
| 1.3.6.1.4.1.539.21.28 | aislcsc48VSupplyBStatus | 1 | 1 | Status of the 'B' 48V power supply. |
| 1.3.6.1.4.1.539.21.29 | aislcscFanStatus | 1 | 1 | Status of the fan unit. |
| 1.3.6.1.4.1.539.21.30 | aislcscMib2ReadCommunity | 1 | 1 | SNMP community string for read-only access with mib-2 view. |
| 1.3.6.1.4.1.539.21.31 | aislcscOverallAlarmSeverity | 1 | 1 | Current overall alarm severity (0-7). This value can be set at the user's discretion, but will be overwritten when the next ala… |
| 1.3.6.1.4.1.539.21.32 | aislcSysCfgTime | 6 | 12 | None |
| 1.3.6.1.4.1.539.21.33 | aislcscStandaloneStatus | 1 | 1 | standalone(1): The card is operating standalone (no external CLC). nonStandalone(2): The card is operating as a line card with a C… |
| 1.3.6.1.4.1.539.21.34 | aislcscShellPromptTimeout | 1 | 1 | Time in minutes before an idle shell is automatically closed. 0 indicates no timeout. |
| 1.3.6.1.4.1.539.21.35 | aislcscDestMenuBreakSeq | 1 | 1 | Sequence of characters to exit a connection made from the destination menu. |