System build type (uniprocessor or multiprocessor).
Parsed from file empire2.asn1.mib.txt
Company: None
Module: EMPIRE
System build type (uniprocessor or multiprocessor).
Parsed from file EMPIRE.mib
Module: EMPIRE
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
ntBuildType OBJECT-TYPE SYNTAX INTEGER { uniprocessor(1), multiprocessor(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "System build type (uniprocessor or multiprocessor)." ::= { ntSystem 33 }
ntBuildType OBJECT-TYPE SYNTAX INTEGER { uniprocessor(1), multiprocessor(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "System build type (uniprocessor or multiprocessor)." ::= { ntSystem 33 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.546.5.1.33.0 | ntBuildType | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.546.5.1.1 | ntSystemVersion | 1 | 1 | The kernel/system version including the release, build, and service-pack numbers. |
1.3.6.1.4.1.546.5.1.2 | ntBuildNumber | 1 | 1 | The kernel build number (e.g. 1057) |
1.3.6.1.4.1.546.5.1.3 | ntServicePackNumber | 1 | 1 | The system service-pack number. If no service-packs have been applied, then 0 is returned. |
1.3.6.1.4.1.546.5.1.4 | ntWorkstationOrServer | 1 | 1 | None |
1.3.6.1.4.1.546.5.1.5 | ntfsDisable8dot3NameCreation | 1 | 1 | This object reflects whether the underlying NT system has enabled or disabled the creation of short names to correspond with long… |
1.3.6.1.4.1.546.5.1.6 | ntWin31FileSystem | 1 | 1 | This object reflects whether the FAT will allow creation, enumeration, opening, or querying of long file names, and whether exten… |
1.3.6.1.4.1.546.5.1.7 | ntCriticalSectTimeout | 1 | 1 | The deadlock time-out for critical sections. |
1.3.6.1.4.1.546.5.1.8 | ntGlobalFlag | 1 | 1 | NT system global hexadecimal flag that controls various internal operations. |
1.3.6.1.4.1.546.5.1.9 | ntIoPageLockLimit | 1 | 1 | Specifies the limit of the number of bytes that can be locked for I/O operations. When 0, the default (512k) is used. |
1.3.6.1.4.1.546.5.1.10 | ntLargeSystemCache | 1 | 1 | A nonzero value indicates that the system favors the system-cache working set rather than the processes working set. |
1.3.6.1.4.1.546.5.1.11 | ntPagedPoolSize | 1 | 1 | Size of paged pool in bytes. When 0, system uses default size (32 MB). |
1.3.6.1.4.1.546.5.1.12 | ntNonPagedPoolSize | 1 | 1 | Size of nonpaged pool in bytes. When 0, system uses default size (based on physical memory). |
1.3.6.1.4.1.546.5.1.13 | ntPagingFiles | 1 | 1 | List of paging files and their sizes used by the system for paging. For each paging file the description includes the file pathna… |
1.3.6.1.4.1.546.5.1.14 | ntSystemPages | 1 | 1 | This object defines the number of system page table entries reserved for I/O buffers and other information. |
1.3.6.1.4.1.546.5.1.15 | ntOptionalSubsystem | 1 | 1 | This object lists those subsystems that are only loaded when the user starts a depending application. |
1.3.6.1.4.1.546.5.1.16 | ntCmdlineOptions | 1 | 1 | This object lists the command-line that runs when an MS-DOS application is launched under NT. |
1.3.6.1.4.1.546.5.1.17 | ntLPTTimeout | 1 | 1 | This object defines how many seconds after the LPT port has been used that Windows NT waits before grabbing the port, closing it,… |
1.3.6.1.4.1.546.5.1.18 | ntDosMemSize | 1 | 1 | Size in MBytes of memory to be given to each individual MS-DOS virtual DOS machine (VDM). |
1.3.6.1.4.1.546.5.1.19 | ntWowCmdline | 1 | 1 | This object defines the command line that runs when a 16-bit Windows-based application is started. The switches instruct NT to s… |
1.3.6.1.4.1.546.5.1.20 | ntWowSize | 1 | 1 | For RISC based computers, this object defines the amount of memory provided in a VDM when a WOW session is started. Value is in … |
1.3.6.1.4.1.546.5.1.21 | ntUserFullScreen | 1 | 1 | This object indicates whether full-screen or windowed mode is used for the console by default. Valid on x86 machines only. |
1.3.6.1.4.1.546.5.1.22 | ntHistoryBufferSize | 1 | 1 | This object indicates the number of commands stored in the history buffer by default. |
1.3.6.1.4.1.546.5.1.23 | ntNumberHistoryBuffers | 1 | 1 | This object indicates the number of history buffers associated with the console by default. |
1.3.6.1.4.1.546.5.1.24 | ntQuickEdit | 1 | 1 | This object indicates if Quick-Edit mode is enabled by default. |
1.3.6.1.4.1.546.5.1.25 | ntScreenBufferSize | 1 | 1 | Width and height of the default console screen buffer. |
1.3.6.1.4.1.546.5.1.26 | ntWindowSize | 1 | 1 | Default width and height of the console window. |
1.3.6.1.4.1.546.5.1.27 | ntWindowsAppInitDLLs | 1 | 1 | Lists the DLLs that will be attached to all Windows-based applications. |
1.3.6.1.4.1.546.5.1.28 | ntWindowsDeviceNotSelectedTimeout | 1 | 1 | Indicates how much time the system waits for a devices to be switched on. |
1.3.6.1.4.1.546.5.1.29 | ntWindowsSpooler | 1 | 1 | Indicates whether printer output is be sent through Print Manager. |
1.3.6.1.4.1.546.5.1.30 | ntWindowsSwapDisk | 1 | 1 | Indicates the name of disk drive and directory to which Windows for MS-DOS in standard-mode swaps non-Windows-based applications. |
1.3.6.1.4.1.546.5.1.31 | ntWindowsXmitRetryTimeout | 1 | 1 | Transmission retry timeout in seconds used by Print Manager. |
1.3.6.1.4.1.546.5.1.32 | ntSystemRoot | 1 | 1 | Drive and directory where the NT system resides. |
1.3.6.1.4.1.546.5.1.34 | ntSysStartOptions | 1 | 1 | System start options. |
1.3.6.1.4.1.546.5.1.35 | ntSysBiosDate | 1 | 1 | System BIOS date. |
1.3.6.1.4.1.546.5.1.36 | ntSysBiosVersion | 1 | 1 | System BIOS version. |
1.3.6.1.4.1.546.5.1.37 | ntVideoResolution | 1 | 1 | System video resolution. |
1.3.6.1.4.1.546.5.1.38 | ntCrashDumpEnabled | 1 | 1 | This object indicates whether debugging information is to be written to a log file in the event of a system crash. |
1.3.6.1.4.1.546.5.1.39 | ntLogEvent | 1 | 1 | This object indicates whether NTAS logging is enabled or disabled. If disabled, NT workstation logging is used. |
1.3.6.1.4.1.546.5.1.40 | ntOverwrite | 1 | 1 | Indicates whether an existing log file is to be overwritten by the new one. Enabled for NTAS, disabled for NT workstation. |
1.3.6.1.4.1.546.5.1.41 | ntSendAlert | 1 | 1 | Indicates whether an administrative alert is sent; enabled for NTAS, disabled for NT workstation. |
1.3.6.1.4.1.546.5.1.42 | ntIsClustered | 1 | 1 | Indicates whether this system is installed and/or running in a windows cluster |
1.3.6.1.4.1.546.5.1.43 | ntClusterName | 1 | 1 | The cluster name that this system is a member of. If the system is not a member of any cluster, then a zero-length string is retu… |
1.3.6.1.4.1.546.5.1.44 | ntClusterMembers | 1 | 1 | A comma-separated list of nodes that are members of the cluster in which this system is a member. Using this information, managem… |
1.3.6.1.4.1.546.5.1.45 | ntClusterIsActive | 1 | 1 | Indicates whether this system is the primary or active node in the NT cluster. It does not necessarily say if the cluster servic… |
1.3.6.1.4.1.546.5.1.46 | ntClusterActiveNode | 1 | 1 | Indicates which of cluster members is active or primary node. Active node owns the Cluster Name resource object. |