This attribute specifies the BGP autonomous system number.
When this value is non-zero, the protocol attribute must be set to
either bgp or to all. And this more specific route will be advertised
together with the aggregated route only if it is learned through BGP
and this attribute matches the BGP autonomous system number
where the network is learned from.
The default value 0 indicates that the BGP autonomous system
number is not specified.
Parsed from file nortelPP-bgpV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-BgpMIB
This attribute specifies the BGP autonomous system number.
When this value is non-zero, the protocol attribute must be set to
either bgp or to all. And this more specific route will be advertised
together with the aggregated route only if it is learned through BGP
and this attribute matches the BGP autonomous system number
where the network is learned from.
The default value 0 indicates that the BGP autonomous system
number is not specified.
Parsed from file Nortel-Magellan-Passport-BgpMIB.mib
Module: Nortel-Magellan-Passport-BgpMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-BgpMIB
[Automatically extracted from oidview.com]
vrIpBgpAggregateNetBgpAsId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the BGP autonomous system number. When this value is non-zero, the protocol attribute must be set to either bgp or to all. And this more specific route will be advertised together with the aggregated route only if it is learned through BGP and this attribute matches the BGP autonomous system number where the network is learned from. The default value 0 indicates that the BGP autonomous system number is not specified." DEFVAL { 0 } ::= { vrIpBgpAggregateNetProvEntry 5 }
vrIpBgpAggregateNetBgpAsId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the BGP autonomous system number. When this value is non-zero, the protocol attribute must be set to either bgp or to all. And this more specific route will be advertised together with the aggregated route only if it is learned through BGP and this attribute matches the BGP autonomous system number where the network is learned from. The default value 0 indicates that the BGP autonomous system number is not specified." DEFVAL { 0 } ::= { vrIpBgpAggregateNetProvEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.100.6.21.6.2.10.1.1 | vrIpBgpAggregateNetPrefix | 0 | 0 | This attribute specifies the network prefix whose length is determined by the length attribute under the same Network component. |
1.3.6.1.4.1.562.2.4.1.100.6.21.6.2.10.1.2 | vrIpBgpAggregateNetLength | 0 | 0 | This attribute specifies the length of the network prefix. |
1.3.6.1.4.1.562.2.4.1.100.6.21.6.2.10.1.3 | vrIpBgpAggregateNetProtocol | 0 | 0 | This attribute specifies the IP protocols to which this route should belong. |
1.3.6.1.4.1.562.2.4.1.100.6.21.6.2.10.1.4 | vrIpBgpAggregateNetEgpAsId | 0 | 0 | This attribute specifies an EGP autonomous system number. When this value is non-zero, the protocol attribute must be set to eit… |
1.3.6.1.4.1.562.2.4.1.100.6.21.6.2.10.1.6 | vrIpBgpAggregateNetOspfTag | 0 | 0 | vrIpBgpAggregateNetOspftag |
1.3.6.1.4.1.562.2.4.1.100.6.21.6.2.10.1.7 | vrIpBgpAggregateNetRipInterface | 0 | 0 | This attribute specifies a local RIP interface which should be equal to one of the IP addresses provisioned as a logicalIf compo… |
1.3.6.1.4.1.562.2.4.1.100.6.21.6.2.10.1.8 | vrIpBgpAggregateNetAction | 0 | 0 | This attribute specifies whether this network should be aggregated or advertised out. |