This attribute specifies the maximum cell transfer delay (MaxCTD)
which is applied to the entire ATM Interface for CBR traffic.
MaxCTD is the sum of the fixed delay and the CDV. The
components of the fixed delay include propagation delay through
the physical media, delays induced by the transmission system, and
fixed components of switch processing delay.
This attribute is used by PNNI in the Resource Availability
Information Group (RAIG) topology updates and route selection. It
is also used by CAC at connection set-up time to determine whether
this ATM Interface can meet the ATM connection's MaxCTD
requirement.
Parsed from file nortelPP-atmCoreV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AtmCoreMIB
This attribute specifies the maximum cell transfer delay (MaxCTD)
which is applied to the entire ATM Interface for CBR traffic.
MaxCTD is the sum of the fixed delay and the CDV. The
components of the fixed delay include propagation delay through
the physical media, delays induced by the transmission system, and
fixed components of switch processing delay.
This attribute is used by PNNI in the Resource Availability
Information Group (RAIG) topology updates and route selection. It
is also used by CAC at connection set-up time to determine whether
this ATM Interface can meet the ATM connection's MaxCTD
requirement.
Parsed from file Nortel-Magellan-Passport-AtmCoreMIB.mib
Module: Nortel-Magellan-Passport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AtmCoreMIB
[Automatically extracted from oidview.com]
atmIfCACbrMaxCtd OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum cell transfer delay (MaxCTD) which is applied to the entire ATM Interface for CBR traffic. MaxCTD is the sum of the fixed delay and the CDV. The components of the fixed delay include propagation delay through the physical media, delays induced by the transmission system, and fixed components of switch processing delay. This attribute is used by PNNI in the Resource Availability Information Group (RAIG) topology updates and route selection. It is also used by CAC at connection set-up time to determine whether this ATM Interface can meet the ATM connection's MaxCTD requirement." DEFVAL { 1000 } ::= { atmIfCACbrProvEntry 40 }
atmIfCACbrMaxCtd OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum cell transfer delay (MaxCTD) which is applied to the entire ATM Interface for CBR traffic. MaxCTD is the sum of the fixed delay and the CDV. The components of the fixed delay include propagation delay through the physical media, delays induced by the transmission system, and fixed components of switch processing delay. This attribute is used by PNNI in the Resource Availability Information Group (RAIG) topology updates and route selection. It is also used by CAC at connection set-up time to determine whether this ATM Interface can meet the ATM connection's MaxCTD requirement." DEFVAL { 1000 } ::= { atmIfCACbrProvEntry 40 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.10 | atmIfCACbrProvPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the constant bit rate (CBR) service category except f… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.20 | atmIfCACbrProvCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the CBR service category excep… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.30 | atmIfCACbrCdv | 0 | 0 | This attribute specifies the peak-to-peak cell delay variation (CDV) which is contributed to the entire ATM Interface for CBR tr… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.50 | atmIfCACbrProvClr | 0 | 0 | This attribute specifies the tolerable cell loss ratio (CLR) for CBR traffic except for connections managed by a Vpt CA. The num… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.60 | atmIfCACbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the CBR service c… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.61 | atmIfCACbrHoldingPriority | 0 | 0 | This attribute specifies the holding priority which applies to SVP and SVC CBR connections. It takes a value from 0 (highest prio… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.70 | atmIfCACbrSvcHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC CBR connections. It takes a value from 0 (highest pri… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.71 | atmIfCACbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC CBR point-to-multipoint connections. It takes a value… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.80 | atmIfCACbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the CBR service category. This attribut… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.90 | atmIfCACbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the CB… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.100 | atmIfCACbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.140 | atmIfCACbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the CBR service category. An override to this def… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.150 | atmIfCACbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the CBR service category. This is the policy which is used to recoup shap… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.160 | atmIfCACbrUnshapedTransmitQueueing | 0 | 0 | This attribute specifies the default queuing option for unshaped connections of the CBR service category. On ATM IP cards, this a… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.165 | atmIfCACbrWeightPolicy | 0 | 0 | This attribute specifies the default policy which is applied when calculating the fairness weight for unshaped connections of th… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.169 | atmIfCACbrForceTagging | 0 | 0 | This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all CBR connections. An override to th… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.170 | atmIfCACbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the CBR service category. This attr… |