This attribute specifies the maximum amount of time that the IWF
waits for an Originator Detection Pattern (ODP) or Answerer
Detection Pattern (ADP). ODP/ADP is a series of special bit
patterns used during the call setup procedures.
If the IWF is the originator of the call, it starts sending ODP
patterns and waits for an ADP for the duration of T400 from the
answerer at call setup time.
If the IWF is the answerer of the call, it waits for an ODP for T400
seconds from the originator and if it receives during that time it
sends an ADP pattern to the originator at the call setup time. Since
both sides operate with different values of T400 timer, a higher
value increases the chance of a successful call setup.
Changes to this attribute do not affect existing calls.
Parsed from file nortelPP-tdmaIwfV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-TdmaIwfMIB
This attribute specifies the maximum amount of time that the IWF
waits for an Originator Detection Pattern (ODP) or Answerer
Detection Pattern (ADP). ODP/ADP is a series of special bit
patterns used during the call setup procedures.
If the IWF is the originator of the call, it starts sending ODP
patterns and waits for an ADP for the duration of T400 from the
answerer at call setup time.
If the IWF is the answerer of the call, it waits for an ODP for T400
seconds from the originator and if it receives during that time it
sends an ADP pattern to the originator at the call setup time. Since
both sides operate with different values of T400 timer, a higher
value increases the chance of a successful call setup.
Changes to this attribute do not affect existing calls.
Parsed from file Nortel-Magellan-Passport-TdmaIwfMIB.mib
Module: Nortel-Magellan-Passport-TdmaIwfMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-TdmaIwfMIB
[Automatically extracted from oidview.com]
tdmaCsV42T400DetectTimer OBJECT-TYPE SYNTAX FixedPoint2 (75..254) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum amount of time that the IWF waits for an Originator Detection Pattern (ODP) or Answerer Detection Pattern (ADP). ODP/ADP is a series of special bit patterns used during the call setup procedures. If the IWF is the originator of the call, it starts sending ODP patterns and waits for an ADP for the duration of T400 from the answerer at call setup time. If the IWF is the answerer of the call, it waits for an ODP for T400 seconds from the originator and if it receives during that time it sends an ADP pattern to the originator at the call setup time. Since both sides operate with different values of T400 timer, a higher value increases the chance of a successful call setup. Changes to this attribute do not affect existing calls." DEFVAL { 75 } ::= { tdmaCsV42ProvEntry 1 }
tdmaCsV42T400DetectTimer OBJECT-TYPE SYNTAX FixedPoint2 (75..254) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum amount of time that the IWF waits for an Originator Detection Pattern (ODP) or Answerer Detection Pattern (ADP). ODP/ADP is a series of special bit patterns used during the call setup procedures. If the IWF is the originator of the call, it starts sending ODP patterns and waits for an ADP for the duration of T400 from the answerer at call setup time. If the IWF is the answerer of the call, it waits for an ODP for T400 seconds from the originator and if it receives during that time it sends an ADP pattern to the originator at the call setup time. Since both sides operate with different values of T400 timer, a higher value increases the chance of a successful call setup. Changes to this attribute do not affect existing calls." DEFVAL { 75 } ::= { tdmaCsV42ProvEntry 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.135.7.10.1.2 | tdmaCsV42T401AckTimer | 0 | 0 | This attribute specifies the maximum amount of time that the IWF waits for an acknowledgment before retransmitting a frame. Sinc… |
1.3.6.1.4.1.562.2.4.1.135.7.10.1.3 | tdmaCsV42T402AckDelayTimer | 0 | 0 | This attribute specifies the maximum amount of time that the IWF may wait following the receipt of any frame requiring a reply b… |
1.3.6.1.4.1.562.2.4.1.135.7.10.1.4 | tdmaCsV42T403IdleProbeTimer | 0 | 0 | This attribute specifies the maximum amount of time that the IWF allows to elapse without frames being exchanged. The link is per… |
1.3.6.1.4.1.562.2.4.1.135.7.10.1.5 | tdmaCsV42TxN401FrameSize | 0 | 0 | This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, E… |
1.3.6.1.4.1.562.2.4.1.135.7.10.1.6 | tdmaCsV42RxN401FrameSize | 0 | 0 | This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, E… |
1.3.6.1.4.1.562.2.4.1.135.7.10.1.7 | tdmaCsV42TxKWindowSize | 0 | 0 | This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the IWF to the re… |
1.3.6.1.4.1.562.2.4.1.135.7.10.1.8 | tdmaCsV42RxKWindowSize | 0 | 0 | This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the remote entity… |
1.3.6.1.4.1.562.2.4.1.135.7.10.1.9 | tdmaCsV42N400RetransLimit | 0 | 0 | This attribute specifies the maximum number of times the IWF retransmits a frame upon expiry of t401AckTimer before appropriate r… |
1.3.6.1.4.1.562.2.4.1.135.7.10.1.10 | tdmaCsV42FcsLength | 0 | 0 | This attribute specifies whether a 16 bit or a 32 bit Frame Check Sequence (FCS) will be used for the link between the IWF and t… |