This attribute specifies the metric type in the OSPF external link state
advertisement of the routes being exported as a result of matching this
export policy.
If the attribute advertiseStatus is set to block, then the value of
extLsaMetricType is ignored. The extLsaMetricType value is not used to
select which routes to block or send, but rather the metric value
advertised for the routes.
The value useProtocolDefault indicates the metric type is automatically
chosen based on the routing protocol which the route was learned from.
Parsed from file nortelPC-ipV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-IpMIB
This attribute specifies the metric type in the OSPF external link state
advertisement of the routes being exported as a result of matching this
export policy.
If the attribute advertiseStatus is set to block, then the value of
extLsaMetricType is ignored. The extLsaMetricType value is not used to
select which routes to block or send, but rather the metric value
advertised for the routes.
The value useProtocolDefault indicates the metric type is automatically
chosen based on the routing protocol which the route was learned from.
Parsed from file Nortel-MsCarrier-MscPassport-IpMIB.mib
Module: Nortel-MsCarrier-MscPassport-IpMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-IpMIB
[Automatically extracted from oidview.com]
mscVrIpOspfExportExtLsaMetricType OBJECT-TYPE SYNTAX INTEGER { useProtocolDefault(0), type1(1), type2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the metric type in the OSPF external link state advertisement of the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of extLsaMetricType is ignored. The extLsaMetricType value is not used to select which routes to block or send, but rather the metric value advertised for the routes. The value useProtocolDefault indicates the metric type is automatically chosen based on the routing protocol which the route was learned from." DEFVAL { useProtocolDefault } ::= { mscVrIpOspfExportProvEntry 8 }
mscVrIpOspfExportExtLsaMetricType OBJECT-TYPE SYNTAX INTEGER { useProtocolDefault(0), type1(1), type2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the metric type in the OSPF external link state advertisement of the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of extLsaMetricType is ignored. The extLsaMetricType value is not used to select which routes to block or send, but rather the metric value advertised for the routes. The value useProtocolDefault indicates the metric type is automatically chosen based on the routing protocol which the route was learned from." DEFVAL { useProtocolDefault } ::= { mscVrIpOspfExportProvEntry 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.1 | mscVrIpOspfExportAdvertiseStatus | 0 | 0 | This attribute specifies if the routes that match this export policy are advertised (send) or not advertised (block). |
1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.2 | mscVrIpOspfExportMetric | 0 | 0 | This attribute specifies the metric to be used on the routes being exported as a result of matching this export policy. If the at… |
1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.3 | mscVrIpOspfExportProtocol | 0 | 0 | This attribute specifies the routes to which this export policy applies based on the routing protocol of how the routes are lear… |
1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.4 | mscVrIpOspfExportRipInterface | 0 | 0 | This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP interface from which the r… |
1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.5 | mscVrIpOspfExportRipNeighbor | 0 | 0 | This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP neighbor of which the rout… |
1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.6 | mscVrIpOspfExportEgpAsId | 0 | 0 | This attribute specifies the EGP learned routes to which this export policy applies, based on the EGP autonomous system identifi… |
1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.7 | mscVrIpOspfExportTag | 0 | 0 | This attribute specifies the OSPF tag to be used on the routes being exported as a result of matching this export policy. If the … |
1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.9 | mscVrIpOspfExportBgpAsId | 0 | 0 | This key attribute specifies the bgp AS from which a bgp route is learned from. This key is used only if the protocol is bgpExte… |
1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.10 | mscVrIpOspfExportBgpPeerIp | 0 | 0 | This key attribute specifies the bgp peer where the routes were learned from. bgpPeerIp of 0 matches all bgp peers. This attribu… |