This attribute is a vector of five transmit traffic parameters whose
mapping is defined by the txTrafficDescType attribute.
The values of peak cell rate (PCR), sustained cell rate (SCR),
Minimum Cell Rate (MCR), actual cell rate (ACR), explicit rate
(ER), equivalent cell rate (ECR), and actual shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds.
When txTrafficDescType is 1 or 2, parameters 1 through 5 are
unused.
In this description, PCR is the greater of either the PCR or the
requested shaping rate (parameter 1 or parameter 5) specified in the
txTrafficDescParm attribute under the Vcd Tm or Vpd Tm
component.
When txTrafficDescType is 3, parameter 1 represents the PCR for
CLP equal to 0 or 1 traffic; parameters 2 and 3 are unused.
When txTrafficDescType is 4, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell discard.
When txTrafficDescType is 5, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell tagging.
When txTrafficDescType is 6, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for
CLP equal to 0 and 1 traffic.
When txTrafficDescType is 7, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell discard; parameter 3 represents the
MBS for CLP equal to 0 traffic.
When txTrafficDescType is 8, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell tagging; parameter 3 represents the
MBS for CLP equal to 0 traffic.
When txTrafficDescType is 3, 4, 5, 6, 7, or 8, parameter 4 reflects
the actual shaping rate in cell/s for this connection. For CQC-based
ATM cards, the set of available shaping rates is based on the
number of interfaces doing shaping (attribute
perVcQueueInterfaces), and the shapingScalingFactor attribute of
the Arc Cqc Override component. A rate of zero (0) indicates that
shaping is not performed, or that the interface is down.
When txTrafficDescType is 9, parameter 1 represents the PCR;
parameter 2 represents the Cell Delay Variation Toleration (CDVT);
parameter 3 represents the Minimum Cell Rate (MCR); the meaning
of parameter 4 depends upon the value of the abrConnectionType
attribute. if abrConnectionType is sourceDest or
virtualSourceDest, parameter 4 represents the Allowed Cell Rate
(ACR); If abrConnectionType is erSwitch, parameter 4 represents
the Explicit Rate (ER); and if abrConnectionType is efciSwitch,
parameter 4 reflects the actual shaping rate in cell/s for this
connection.
When txTrafficDescType is 3, 4, 5, 6, 7, 8, or 9, parameter 5 reflects
the equivalent cell rate in cell/s for this connection as determined by
the Connection Admission Control (CAC) algorithm. The
equivalent cell rate is useful in determining the admission
characteristics of this connection.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute is a vector of five transmit traffic parameters whose
mapping is defined by the txTrafficDescType attribute.
The values of peak cell rate (PCR), sustained cell rate (SCR),
Minimum Cell Rate (MCR), actual cell rate (ACR), explicit rate
(ER), equivalent cell rate (ECR), and actual shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds.
When txTrafficDescType is 1 or 2, parameters 1 through 5 are
unused.
In this description, PCR is the greater of either the PCR or the
requested shaping rate (parameter 1 or parameter 5) specified in the
txTrafficDescParm attribute under the Vcd Tm or Vpd Tm
component.
When txTrafficDescType is 3, parameter 1 represents the PCR for
CLP equal to 0 or 1 traffic; parameters 2 and 3 are unused.
When txTrafficDescType is 4, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell discard.
When txTrafficDescType is 5, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell tagging.
When txTrafficDescType is 6, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for
CLP equal to 0 and 1 traffic.
When txTrafficDescType is 7, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell discard; parameter 3 represents the
MBS for CLP equal to 0 traffic.
When txTrafficDescType is 8, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell tagging; parameter 3 represents the
MBS for CLP equal to 0 traffic.
When txTrafficDescType is 3, 4, 5, 6, 7, or 8, parameter 4 reflects
the actual shaping rate in cell/s for this connection. For CQC-based
ATM cards, the set of available shaping rates is based on the
number of interfaces doing shaping (attribute
perVcQueueInterfaces), and the shapingScalingFactor attribute of
the Arc Cqc Override component. A rate of zero (0) indicates that
shaping is not performed, or that the interface is down.
When txTrafficDescType is 9, parameter 1 represents the PCR;
parameter 2 represents the Cell Delay Variation Toleration (CDVT);
parameter 3 represents the Minimum Cell Rate (MCR); the meaning
of parameter 4 depends upon the value of the abrConnectionType
attribute. if abrConnectionType is sourceDest or
virtualSourceDest, parameter 4 represents the Allowed Cell Rate
(ACR); If abrConnectionType is erSwitch, parameter 4 represents
the Explicit Rate (ER); and if abrConnectionType is efciSwitch,
parameter 4 reflects the actual shaping rate in cell/s for this
connection.
When txTrafficDescType is 3, 4, 5, 6, 7, 8, or 9, parameter 5 reflects
the equivalent cell rate in cell/s for this connection as determined by
the Connection Admission Control (CAC) algorithm. The
equivalent cell rate is useful in determining the admission
characteristics of this connection.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVptVccTmTxTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptVccTmTxTdpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute is a vector of five transmit traffic parameters whose mapping is defined by the txTrafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR), Minimum Cell Rate (MCR), actual cell rate (ACR), explicit rate (ER), equivalent cell rate (ECR), and actual shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. When txTrafficDescType is 1 or 2, parameters 1 through 5 are unused. In this description, PCR is the greater of either the PCR or the requested shaping rate (parameter 1 or parameter 5) specified in the txTrafficDescParm attribute under the Vcd Tm or Vpd Tm component. When txTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 or 1 traffic; parameters 2 and 3 are unused. When txTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell discard. When txTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell tagging. When txTrafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic. When txTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic. When txTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic. When txTrafficDescType is 3, 4, 5, 6, 7, or 8, parameter 4 reflects the actual shaping rate in cell/s for this connection. For CQC-based ATM cards, the set of available shaping rates is based on the number of interfaces doing shaping (attribute perVcQueueInterfaces), and the shapingScalingFactor attribute of the Arc Cqc Override component. A rate of zero (0) indicates that shaping is not performed, or that the interface is down. When txTrafficDescType is 9, parameter 1 represents the PCR; parameter 2 represents the Cell Delay Variation Toleration (CDVT); parameter 3 represents the Minimum Cell Rate (MCR); the meaning of parameter 4 depends upon the value of the abrConnectionType attribute. if abrConnectionType is sourceDest or virtualSourceDest, parameter 4 represents the Allowed Cell Rate (ACR); If abrConnectionType is erSwitch, parameter 4 represents the Explicit Rate (ER); and if abrConnectionType is efciSwitch, parameter 4 reflects the actual shaping rate in cell/s for this connection. When txTrafficDescType is 3, 4, 5, 6, 7, 8, or 9, parameter 5 reflects the equivalent cell rate in cell/s for this connection as determined by the Connection Admission Control (CAC) algorithm. The equivalent cell rate is useful in determining the admission characteristics of this connection." ::= { mscAtmIfVptVccTm 451 }
mscAtmIfVptVccTmTxTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptVccTmTxTdpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute is a vector of five transmit traffic parameters whose mapping is defined by the txTrafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR), Minimum Cell Rate (MCR), actual cell rate (ACR), explicit rate (ER), equivalent cell rate (ECR), and actual shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. When txTrafficDescType is 1 or 2, parameters 1 through 5 are unused. In this description, PCR is the greater of either the PCR or the requested shaping rate (parameter 1 or parameter 5) specified in the txTrafficDescParm attribute under the Vcd Tm or Vpd Tm component. When txTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 or 1 traffic; parameters 2 and 3 are unused. When txTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell discard. When txTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell tagging. When txTrafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic. When txTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic. When txTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic. When txTrafficDescType is 3, 4, 5, 6, 7, or 8, parameter 4 reflects the actual shaping rate in cell/s for this connection. For CQC-based ATM cards, the set of available shaping rates is based on the number of interfaces doing shaping (attribute perVcQueueInterfaces), and the shapingScalingFactor attribute of the Arc Cqc Override component. A rate of zero (0) indicates that shaping is not performed, or that the interface is down. When txTrafficDescType is 9, parameter 1 represents the PCR; parameter 2 represents the Cell Delay Variation Toleration (CDVT); parameter 3 represents the Minimum Cell Rate (MCR); the meaning of parameter 4 depends upon the value of the abrConnectionType attribute. if abrConnectionType is sourceDest or virtualSourceDest, parameter 4 represents the Allowed Cell Rate (ACR); If abrConnectionType is erSwitch, parameter 4 represents the Explicit Rate (ER); and if abrConnectionType is efciSwitch, parameter 4 reflects the actual shaping rate in cell/s for this connection. When txTrafficDescType is 3, 4, 5, 6, 7, 8, or 9, parameter 5 reflects the equivalent cell rate in cell/s for this connection as determined by the Connection Admission Control (CAC) algorithm. The equivalent cell rate is useful in determining the admission characteristics of this connection." ::= { mscAtmIfVptVccTm 451 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.9.20.7.451.1 | mscAtmIfVptVccTmTxTdpEntry | 2 | 2 | An entry in the mscAtmIfVptVccTmTxTdpTable. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.9.20.7.1 | mscAtmIfVptVccTmRowStatusTable | 1 | 5 | This entry controls the addition and deletion of mscAtmIfVptVccTm components. |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.7.2 | mscAtmIfVptVccTmAbr | 2 | 22 | None |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.7.100 | mscAtmIfVptVccTmOperTable | 1 | 23 | This group contains attributes for the Tm component to reflect operational traffic attributes. |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.7.452 | mscAtmIfVptVccTmTxQThreshTable | 1 | 3 | mscAtmIfVptVccTmTxQThreshtable |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.7.453 | mscAtmIfVptVccTmRxTdpTable | 1 | 3 | This attribute is a vector of four traffic parameters whose meanings are defined by the rxTrafficDescType attribute. The values … |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.7.454 | mscAtmIfVptVccTmTqpTable | 1 | 3 | This attribute is a vector of three elements that indicate the quality of service parameters for the forward direction for this … |
| 1.3.6.1.4.1.562.36.2.1.114.9.20.7.455 | mscAtmIfVptVccTmRqpTable | 1 | 3 | This attribute is a vector of three elements that indicate the quality of service parameters for the backward direction for this… |