This attribute is a vector of four traffic parameters whose meanings
are defined by the rxTrafficDescType attribute. The values of peak
cell rate (PCR), sustained cell rate (SCR), minimum cell rate
(MCR) are expressed in cell/s. Maximum burst size (MBS) is
expressed in cells. Cell delay variation tolerance (CDVT) is
expressed in microseconds.
When rxTrafficDescType is 1 or 2, none of the parameters are used.
When rxTrafficDescType is 3, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT.
When rxTrafficDescType is 4, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell discard; parameter 4 represents the
CDVT.
When rxTrafficDescType is 5, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell tagging; parameter 4 represents the
CDVT.
When rxTrafficDescType is 6, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for
CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT.
When rxTrafficDescType is 7, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell discard; parameter 3 represents the
MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT.
When rxTrafficDescType is 8, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell tagging; parameter 3 represents the
MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT.
When rxTrafficDescType is 9, parameter 1 represents the PCR;
parameter 2 represents CDVT; parameter 3 represents the MCR;
parameter 4 is not used.
If upc is disabled for this connection, the values of PCR, SCR,
MBS and CDVT are the provisioned parameters.
If upc is enabled, the values of PCR, SCR, MBS, and CDVT are
exactly the values used by the usage parameter control hardware in
policing the arriving traffic. These may vary slightly from the
provisioned values due to granularity of the hardware. In the case
where the PCR is equal to the SCR, the effective MBS is zero.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute is a vector of four traffic parameters whose meanings
are defined by the rxTrafficDescType attribute. The values of peak
cell rate (PCR), sustained cell rate (SCR), minimum cell rate
(MCR) are expressed in cell/s. Maximum burst size (MBS) is
expressed in cells. Cell delay variation tolerance (CDVT) is
expressed in microseconds.
When rxTrafficDescType is 1 or 2, none of the parameters are used.
When rxTrafficDescType is 3, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT.
When rxTrafficDescType is 4, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell discard; parameter 4 represents the
CDVT.
When rxTrafficDescType is 5, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell tagging; parameter 4 represents the
CDVT.
When rxTrafficDescType is 6, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for
CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT.
When rxTrafficDescType is 7, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell discard; parameter 3 represents the
MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT.
When rxTrafficDescType is 8, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell tagging; parameter 3 represents the
MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT.
When rxTrafficDescType is 9, parameter 1 represents the PCR;
parameter 2 represents CDVT; parameter 3 represents the MCR;
parameter 4 is not used.
If upc is disabled for this connection, the values of PCR, SCR,
MBS and CDVT are the provisioned parameters.
If upc is enabled, the values of PCR, SCR, MBS, and CDVT are
exactly the values used by the usage parameter control hardware in
policing the arriving traffic. These may vary slightly from the
provisioned values due to granularity of the hardware. In the case
where the PCR is equal to the SCR, the effective MBS is zero.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVptVccTmRxTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptVccTmRxTdpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute is a vector of four traffic parameters whose meanings are defined by the rxTrafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR), minimum cell rate (MCR) are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. Cell delay variation tolerance (CDVT) is expressed in microseconds. When rxTrafficDescType is 1 or 2, none of the parameters are used. When rxTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT. When rxTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell discard; parameter 4 represents the CDVT. When rxTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell tagging; parameter 4 represents the CDVT. When rxTrafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT. When rxTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT. When rxTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT. When rxTrafficDescType is 9, parameter 1 represents the PCR; parameter 2 represents CDVT; parameter 3 represents the MCR; parameter 4 is not used. If upc is disabled for this connection, the values of PCR, SCR, MBS and CDVT are the provisioned parameters. If upc is enabled, the values of PCR, SCR, MBS, and CDVT are exactly the values used by the usage parameter control hardware in policing the arriving traffic. These may vary slightly from the provisioned values due to granularity of the hardware. In the case where the PCR is equal to the SCR, the effective MBS is zero." ::= { mscAtmIfVptVccTm 453 }
mscAtmIfVptVccTmRxTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptVccTmRxTdpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute is a vector of four traffic parameters whose meanings are defined by the rxTrafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR), minimum cell rate (MCR) are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. Cell delay variation tolerance (CDVT) is expressed in microseconds. When rxTrafficDescType is 1 or 2, none of the parameters are used. When rxTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT. When rxTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell discard; parameter 4 represents the CDVT. When rxTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell tagging; parameter 4 represents the CDVT. When rxTrafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT. When rxTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT. When rxTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT. When rxTrafficDescType is 9, parameter 1 represents the PCR; parameter 2 represents CDVT; parameter 3 represents the MCR; parameter 4 is not used. If upc is disabled for this connection, the values of PCR, SCR, MBS and CDVT are the provisioned parameters. If upc is enabled, the values of PCR, SCR, MBS, and CDVT are exactly the values used by the usage parameter control hardware in policing the arriving traffic. These may vary slightly from the provisioned values due to granularity of the hardware. In the case where the PCR is equal to the SCR, the effective MBS is zero." ::= { mscAtmIfVptVccTm 453 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.114.9.20.7.453.1 | mscAtmIfVptVccTmRxTdpEntry | 2 | 2 | An entry in the mscAtmIfVptVccTmRxTdpTable. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.114.9.20.7.1 | mscAtmIfVptVccTmRowStatusTable | 1 | 5 | This entry controls the addition and deletion of mscAtmIfVptVccTm components. |
1.3.6.1.4.1.562.36.2.1.114.9.20.7.2 | mscAtmIfVptVccTmAbr | 2 | 22 | None |
1.3.6.1.4.1.562.36.2.1.114.9.20.7.100 | mscAtmIfVptVccTmOperTable | 1 | 23 | This group contains attributes for the Tm component to reflect operational traffic attributes. |
1.3.6.1.4.1.562.36.2.1.114.9.20.7.451 | mscAtmIfVptVccTmTxTdpTable | 1 | 3 | This attribute is a vector of five transmit traffic parameters whose mapping is defined by the txTrafficDescType attribute. The … |
1.3.6.1.4.1.562.36.2.1.114.9.20.7.452 | mscAtmIfVptVccTmTxQThreshTable | 1 | 3 | mscAtmIfVptVccTmTxQThreshtable |
1.3.6.1.4.1.562.36.2.1.114.9.20.7.454 | mscAtmIfVptVccTmTqpTable | 1 | 3 | This attribute is a vector of three elements that indicate the quality of service parameters for the forward direction for this … |
1.3.6.1.4.1.562.36.2.1.114.9.20.7.455 | mscAtmIfVptVccTmRqpTable | 1 | 3 | This attribute is a vector of three elements that indicate the quality of service parameters for the backward direction for this… |