An entry in the mscDclVsLCoPathDataTable.
Parsed from file nortelPC-dcmeV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
An entry in the mscDclVsLCoPathDataTable.
Parsed from file Nortel-MsCarrier-MscPassport-DcmeMIB.mib
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
[Automatically extracted from oidview.com]
mscDclVsLCoPathDataEntry OBJECT-TYPE SYNTAX MscDclVsLCoPathDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscDclVsLCoPathDataTable." INDEX { mscDclIndex, mscDclVsIndex, mscDclVsLCoIndex } ::= { mscDclVsLCoPathDataTable 1 }
mscDclVsLCoPathDataEntry OBJECT-TYPE SYNTAX MscDclVsLCoPathDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscDclVsLCoPathDataTable." INDEX { mscDclIndex, mscDclVsIndex, mscDclVsLCoIndex } ::= { mscDclVsLCoPathDataTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.1 | mscDclVsLCoState | 0 | 0 | This attribute reflects the current state of the connection. The pathDown state indicates a connection that has no remote end pro… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.2 | mscDclVsLCoOverrideRemoteName | 0 | 0 | If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.3 | mscDclVsLCoEnd | 0 | 0 | This attribute identifies whether this is the calling or called end of the path. |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.4 | mscDclVsLCoCostMetric | 0 | 0 | This attribute gives the route's total cost metric. It is calculated as the sum of the cost metric of all trunks in the path at … |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.5 | mscDclVsLCoDelayMetric | 0 | 0 | This attribute gives the total delay of the route as the one way delay for a 512 byte packet. It is calculated as the sum of the… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.6 | mscDclVsLCoRoundTripDelay | 0 | 0 | This attribute contains the time taken for a packet (cell) of 44 bytes to be transmitted to the remote LCo and return to this LC… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.7 | mscDclVsLCoSetupPriority | 0 | 0 | This attribute gives the priority at which the current path is established. Zero is the highest priority and four is the lowest.… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.8 | mscDclVsLCoHoldingPriority | 0 | 0 | This attribute gives the priority at which a path holds its current path once the path is established. Zero is the highest prior… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.9 | mscDclVsLCoRequiredTxBandwidth | 0 | 0 | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of the trunks of its route. This at… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.10 | mscDclVsLCoRequiredRxBandwidth | 0 | 0 | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of trunks of its route. This attrib… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.11 | mscDclVsLCoRequiredTrafficType | 0 | 0 | This operational attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and … |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.12 | mscDclVsLCoPermittedTrunkTypes | 0 | 0 | This operational attribute lists up to eight types of trunk that can be used on the route. The originating end of the connection… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.13 | mscDclVsLCoRequiredSecurity | 0 | 0 | This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and … |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.14 | mscDclVsLCoRequiredCustomerParameter | 0 | 0 | This attribute indicates the allowed customer defined parameter of the trunks on the route.The originating end of the connection… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.15 | mscDclVsLCoEmissionPriority | 0 | 0 | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. The originating end … |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.16 | mscDclVsLCoDiscardPriority | 0 | 0 | This attribute indicates the importance of the packets on the path.The originating end of the connection sets discardPriority. O… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.17 | mscDclVsLCoPathType | 0 | 0 | mscDclVsLCoPathtype |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.18 | mscDclVsLCoRetryCount | 0 | 0 | This attribute is the count of the number of times the path chosen during route selection could not be instantiated. This count … |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.19 | mscDclVsLCoPathFailureCount | 0 | 0 | This attribute is the count of the number of times the path has successfully connected. It is set to zero the first time the pat… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.20 | mscDclVsLCoReasonForNoRoute | 0 | 0 | This attribute is the route selection's reasonForNoRoute and provides a brief reason for which a route was not selected. The reas… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.21 | mscDclVsLCoLastTearDownReason | 0 | 0 | This attribute reflects the last tear down reason for a connection (LCo). In many cases this displays the reason for a momentary… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.22 | mscDclVsLCoPathFailureAction | 0 | 0 | This attribute displays whether the application is set to tolerate momentary interruption of a path while a new path is selected… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.23 | mscDclVsLCoBumpPreference | 0 | 0 | This attribute specifies when bumping will occur during route selection process. Bumping may occur when necessary or always. It w… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.24 | mscDclVsLCoOptimization | 0 | 0 | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS… |
| 1.3.6.1.4.1.562.36.2.1.130.4.3.10.1.25 | mscDclVsLCoPathUpDateTime | 0 | 0 | This is the time stamp when the current path was established or reestablished. |