Tells you the hardware revision for the
System Controller.
Parsed from file Rlan440.mib.mib.txt
Company: None
Module: XPRESS-MIB
Tells you the hardware revision for the
System Controller.
Parsed from file XPRESS-MIB.mib
Module: XPRESS-MIB
Vendor: Gandalf
Module: XPRESS-MIB
[Automatically extracted from oidview.com]
rSysRscHardwareRev OBJECT-TYPE SYNTAX DisplayString (SIZE(1..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Tells you the hardware revision for the System Controller." ::= { rlanSystemGroup 26 }
rSysRscHardwareRev OBJECT-TYPE SYNTAX DisplayString (SIZE(1..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Tells you the hardware revision for the System Controller." ::= { rlanSystemGroup 26 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.64.9.1.26.0 | rSysRscHardwareRev | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.64.9.1.1 | rSysName | 1 | 1 | Tells you the name allocated to this system. |
1.3.6.1.4.1.64.9.1.2 | rSysAdminState | 1 | 1 | Select this option when you want the system to process new calls. If you disable this option, the system will not accept or gener… |
1.3.6.1.4.1.64.9.1.4 | rSysTransDelay | 1 | 1 | Enter the maximum frame age (in tenths of a second). |
1.3.6.1.4.1.64.9.1.6 | rSysCallTeardown | 1 | 1 | Select this option when you want the system to tear down all currently active calls. |
1.3.6.1.4.1.64.9.1.7 | rSysNVRAMDiag | 1 | 1 | Tells you whether the system has passed the NVRAM diagnostics. If it failed, the read/write test passed, but at least one of the… |
1.3.6.1.4.1.64.9.1.8 | rSysRTCDiag | 1 | 1 | Tells you whether the system's real-time clock is reliable. If the real-time clock has failed the diagnostics, the system is usin… |
1.3.6.1.4.1.64.9.1.9 | rSysLANDiag | 1 | 1 | Tells you whether the 82596 LAN controller chip passed or failed the LAN diagnostics. |
1.3.6.1.4.1.64.9.1.10 | rSysPromRev | 1 | 1 | Tells you the revision number of the boot PROM. |
1.3.6.1.4.1.64.9.1.11 | rSysOpState | 1 | 1 | Tells you whether the system is operational (enabled), not operational (disabled) or faulty. |
1.3.6.1.4.1.64.9.1.12 | rSysUpTime | 1 | 1 | Tells you how long (in hundredths of a second) the system has been running since the last reset. |
1.3.6.1.4.1.64.9.1.13 | rSysTotalRAM | 1 | 1 | Tells you how much RAM has been allocated to the System Controller. |
1.3.6.1.4.1.64.9.1.14 | rSysRSCSlot | 1 | 1 | Tells you the slot position of the RSC 9000 card (System Controller) with respect to the P2 backplane. |
1.3.6.1.4.1.64.9.1.15 | rSysCompressionAdminState | 1 | 1 | Select this option when you want the system to use data compression. |
1.3.6.1.4.1.64.9.1.16 | rSysCompressionOpState | 1 | 1 | Tells you whether data compression for the system is disabled, enabled, or faulty. |
1.3.6.1.4.1.64.9.1.17 | rSysCLIDSecurity | 1 | 1 | Select this option when you want the system to use CLID security. |
1.3.6.1.4.1.64.9.1.18 | rSysCLIDEnforced | 1 | 1 | Select this option when you want the system to accept only incoming calls with a CLID. |
1.3.6.1.4.1.64.9.1.19 | rSysIncomingMinBearer | 1 | 1 | Select the minimum bearer capability allowed during an incoming call: 64 Kbps Unrestricted, 56 Kbps Digital, 3100 Hz Audio, or S… |
1.3.6.1.4.1.64.9.1.20 | rSysRLANLearningAdminState | 1 | 1 | Select this option when you want the system to learn remote LANs that use the Gandalf proprietary link protocol and configure the… |
1.3.6.1.4.1.64.9.1.21 | rSysDateAndTime | 1 | 1 | Enter the current date and time, using the format specified in RFC 1443. |
1.3.6.1.4.1.64.9.1.22 | rSysReset | 1 | 1 | Select hardReset when you want the System Controller to reset. |
1.3.6.1.4.1.64.9.1.23 | rSysPassword | 1 | 1 | Enter the system password for the system's embedded console. |
1.3.6.1.4.1.64.9.1.24 | rSysHubType | 1 | 1 | Tells you the hub type for this system installation. |
1.3.6.1.4.1.64.9.1.25 | rSysRscSoftwareRev | 1 | 1 | Tells you the software revision for the System Controller. |
1.3.6.1.4.1.64.9.1.27 | rSysCompressionSoftwareRev | 1 | 1 | Tells you the software revision for the System-Controller compression card. |
1.3.6.1.4.1.64.9.1.28 | rSysCompressionHardwareRev | 1 | 1 | Tells you the hardware revision for the System-Controller compression card. |
1.3.6.1.4.1.64.9.1.29 | rSysCompressionPromRev | 1 | 1 | Tells you the revision number of the boot PROM for the System-Controller compression card. |
1.3.6.1.4.1.64.9.1.30 | rSysLongCallThreshold | 1 | 1 | Enter the threshold an active call must exceed (120 - 86340 seconds) before the system generates a potential trap and event alar… |
1.3.6.1.4.1.64.9.1.31 | rSysLongCallEvents | 1 | 1 | Select this option when you want the system to generate alarms to the event log when a call to a remote LAN exceeds the call thr… |
1.3.6.1.4.1.64.9.1.32 | rSysP1BckPlSize | 1 | 1 | Tells you the size of the P1 backplane that the system is attached to. |
1.3.6.1.4.1.64.9.1.33 | rSysRipForwarding | 1 | 1 | Select this option when you want the system to forward the rips learned from its active remote LANs that are doing PPP IPCP. Thes… |
1.3.6.1.4.1.64.9.1.34 | rSysOverDOSBS | 1 | 1 | Select this option when you want the system to override the DOSBS (Data Over Speech Bearer Services), enabled at IO card ports. |
1.3.6.1.4.1.64.9.1.35 | rSysARPProxy | 1 | 1 | Select this option when you want the system to answer ARP request on behalf of a remote address configuered on the protocol list … |
1.3.6.1.4.1.64.9.1.36 | rSysIdByCLID | 1 | 1 | Select this option when you want the system to identify a caller from its Calling Line ID (CLID) before the call is answered. Th… |
1.3.6.1.4.1.64.9.1.37 | rSysDialBackHoldoff | 1 | 1 | Time delay the system will observe between the time it determines a dialback call is to be placed and the actual outgoing call re… |
1.3.6.1.4.1.64.9.1.38 | rSysFailedCallRetryHoldoff | 1 | 1 | Period of time after a failed outgoing call attempt the system will ignore request to place a call to the same remote. In Japan… |
1.3.6.1.4.1.64.9.1.39 | rSysCLIDBlacklistAfterAttempts | 1 | 1 | The number of times that a CLID will be allowed to fail until it is blacklisted. The default is one, that is, the first time that… |