Vendor: Merlin Gerin
Module: MG-SNMP-UPS-MIB
[Automatically extracted from oidview.com]
upsmgConfig OBJECT IDENTIFIER ::= { upsmg 4 }
upsmgConfig OBJECT IDENTIFIER ::= { upsmg 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.705.1.4.1 | upsmgConfigBatteryInstalled, upsConfigBatteryInstalled | 1 | 1 | The battery installed status. |
| 1.3.6.1.4.1.705.1.4.2 | upsmgConfigNominalBatteryVoltage, upsConfigNominalBatteryVoltage | 1 | 1 | The nominal battery voltage. |
| 1.3.6.1.4.1.705.1.4.3 | upsmgConfigNominalBatteryTime, upsConfigNominalBatteryTime | 1 | 1 | The full load battery autonomy time. |
| 1.3.6.1.4.1.705.1.4.4 | upsmgConfigNominalRechargeTime, upsConfigNominalRechargeTime | 1 | 1 | The recharge time to go from low battery cut off to full charge at full load. |
| 1.3.6.1.4.1.705.1.4.5 | upsmgConfigMinRechargeLevel, upsConfigMinRechargeLevel | 1 | 1 | The minimum battery level required to supply power on the loads after low battery condition turn off and restart on main return. |
| 1.3.6.1.4.1.705.1.4.6 | upsmgConfigMaxRechargeTime, upsConfigMaxRechargeTime | 1 | 1 | The maximum time delay of battery recharge before supply power to the loads. |
| 1.3.6.1.4.1.705.1.4.7 | upsmgConfigLowBatteryTime, upsConfigLowBatteryTime | 1 | 1 | To set remaining time value for low battery condition. |
| 1.3.6.1.4.1.705.1.4.8 | upsmgConfigLowBatteryLevel, upsConfigLowBatteryLevel | 1 | 1 | To set battery level value for low battery condition. |
| 1.3.6.1.4.1.705.1.4.9 | upsmgConfigAutoRestart, upsConfigAutoRestart | 1 | 1 | The automatic restart enabling status. |
| 1.3.6.1.4.1.705.1.4.10 | upsmgConfigShutdownTimer, upsConfigShutdownTimer | 1 | 1 | To set ups shutdown timer from on battery condition. |
| 1.3.6.1.4.1.705.1.4.11 | upsmgConfigSysShutDuration, upsConfigSysShutDuration | 1 | 1 | To set ups shutdown delay (Sn delay). |
| 1.3.6.1.4.1.705.1.4.12 | upsmgConfigVARating, upsConfigVARating | 1 | 1 | The UPS nominal VA rating. |
| 1.3.6.1.4.1.705.1.4.13 | upsmgConfigLowTransfer, upsConfigLowTransfer | 1 | 1 | The low voltage transfer point. |
| 1.3.6.1.4.1.705.1.4.14 | upsmgConfigHighTransfer, upsConfigHighTransfer | 1 | 1 | upsmgConfigHightransfer |
| 1.3.6.1.4.1.705.1.4.15 | upsmgConfigOutputNominalVoltage, upsConfigOutputNominalVoltage | 1 | 1 | The nominal output voltage. |
| 1.3.6.1.4.1.705.1.4.16 | upsmgConfigOutputNominalCurrent, upsConfigOutputNominalCurrent | 1 | 1 | The nominal output current. |
| 1.3.6.1.4.1.705.1.4.17 | upsmgConfigOutputNominalFrequency, upsConfigOutputNominalFrequency | 1 | 1 | The nominal output frequency. |
| 1.3.6.1.4.1.705.1.4.18 | upsmgConfigByPassType, upsConfigByPassType | 1 | 1 | The UPS by pass switch type. |
| 1.3.6.1.4.1.705.1.4.19 | upsmgConfigAlarmAudible, upsConfigAlarmAudible | 1 | 1 | To set audible alarm status. |
| 1.3.6.1.4.1.705.1.4.20 | upsmgConfigAlarmTimeDelay, upsConfigAlarmTimeDelay | 1 | 1 | To set audible alarm time delay. |
| 1.3.6.1.4.1.705.1.4.21 | upsmgConfigDevicesNum, upsConfigDevicesNum | 1 | 1 | The number of devices that are powered by the UPS. |
| 1.3.6.1.4.1.705.1.4.22 | upsmgConfigDevicesTable, upsConfigDevicesTable | 1 | 9 | The table of devices that are powered by the UPS. |
| 1.3.6.1.4.1.705.1.4.23 | upsmgConfigReceptaclesTable, upsConfigReceptaclesTable | 1 | 11 | The table of receptacles. |
| 1.3.6.1.4.1.705.1.4.24 | upsmgConfigExtAlarmNum, upsConfigExtAlarmNum | 1 | 1 | The number of environ external alarm, value is 8. |
| 1.3.6.1.4.1.705.1.4.25 | upsmgConfigExtAlarmTable, upsConfigExtAlarmTable | 1 | 3 | The table of environmental external alarms. |
| 1.3.6.1.4.1.705.1.4.26 | upsmgConfigEmergencyTestFail, upsConfigEmergencyTestFail | 1 | 1 | The emergency condition status on Battery test fail. |
| 1.3.6.1.4.1.705.1.4.27 | upsmgConfigEmergencyOnByPass, upsConfigEmergencyOnByPass | 1 | 1 | The emergency condition status on By Pass. |
| 1.3.6.1.4.1.705.1.4.28 | upsmgConfigEmergencyOverload, upsConfigEmergencyOverload | 1 | 1 | The emergency condition status on overload. |
| 1.3.6.1.4.1.705.1.4.29 | upsmgConfigControlDayTable, upsConfigControlDayTable | 1 | 4 | The table of daily on/off time. |
| 1.3.6.1.4.1.705.1.4.30 | upsmgConfigLowBooster | 1 | 1 | To set UPS booster low threshold. |
| 1.3.6.1.4.1.705.1.4.31 | upsmgConfigHighBooster | 1 | 1 | To set UPS booster high threshold. |
| 1.3.6.1.4.1.705.1.4.32 | upsmgConfigLowFader | 1 | 1 | To set UPS fader low threshold. |
| 1.3.6.1.4.1.705.1.4.33 | upsmgConfigHighFader | 1 | 1 | To set UPS fader high threshold. |
| 1.3.6.1.4.1.705.1.4.34 | upsmgConfigEnvironmentTable | 1 | 15 | upsmgConfigEnvironmentTable OBJECT-TYPE SYNTAX SEQUENCE OF UpsmgConfigEnvironmentEntry ACCESS not-accessible STATUS mandatory D… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.705.1.1 | upsmgIdent, upsIdent | 7 | 14 | None |
| 1.3.6.1.4.1.705.1.2 | upsmgManagement, upsManagement | 2 | 13 | None |
| 1.3.6.1.4.1.705.1.3 | upsmgReceptacle, upsReceptacle | 2 | 13 | None |
| 1.3.6.1.4.1.705.1.5 | upsmgBattery, upsBattery | 17 | 34 | None |
| 1.3.6.1.4.1.705.1.6 | upsmgInput, upsInput | 4 | 14 | None |
| 1.3.6.1.4.1.705.1.7 | upsmgOutput, upsOutput | 12 | 29 | None |
| 1.3.6.1.4.1.705.1.8 | upsmgEnviron, upsEnviron | 7 | 28 | None |
| 1.3.6.1.4.1.705.1.9 | upsmgControl, upsControl | 3 | 17 | None |
| 1.3.6.1.4.1.705.1.10 | upsmgTest, upsTest | 11 | 22 | None |
| 1.3.6.1.4.1.705.1.11 | upsmgTraps, upsTraps | 52 | 52 | None |
| 1.3.6.1.4.1.705.1.12 | upsmgAgent, upsAgent | 18 | 36 | None |
| 1.3.6.1.4.1.705.1.13 | upsmgRemote | 2 | 4 | None |