Network port entry.
Parsed from file netapp_2_2_2.mib.txt
Company: netapp
Module: NETAPP-MIB
Vendor: Network Appliance
Module: NETAPP-MIB (netapp_2_2_2.mib)
Type: ENTRY
Access: not-accessible
Syntax: NetportEntry
Automatically extracted from www.mibdepot.com
netportEntry OBJECT-TYPE SYNTAX NetportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Network port entry." INDEX { netportNode, netportPort } ::= { netportTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.789.1.22.2.1.1 | netportNode | 0 | 0 | Node where the port belongs to. |
| 1.3.6.1.4.1.789.1.22.2.1.2 | netportPort | 0 | 0 | Port identity. |
| 1.3.6.1.4.1.789.1.22.2.1.3 | netportRole | 0 | 0 | Role of the port. A port must have one of the following roles: cluster(1), data(2), mgmt(3), intercluster(4), cluster-mgmt(5) or… |
| 1.3.6.1.4.1.789.1.22.2.1.4 | netportLinkState | 0 | 0 | The link-state of the port. Normally it is either UP(2) or DOWN(3). |
| 1.3.6.1.4.1.789.1.22.2.1.5 | netportMtu | 0 | 0 | The Maximum Transmission Unit (MTU) refers to the size (in bytes) of the largest packet that is supported by the port. |
| 1.3.6.1.4.1.789.1.22.2.1.6 | netportAutonegAdmin | 0 | 0 | Indicates whether the port's auto-negotiation property is enabled by an administrator. |
| 1.3.6.1.4.1.789.1.22.2.1.7 | netportAutonegOper | 0 | 0 | Indicates whether the auto-negotiation is enabled on the port. |
| 1.3.6.1.4.1.789.1.22.2.1.8 | netportDuplexAdmin | 0 | 0 | The duplex mode of the port set by the administrator. It can be either undef(0), auto(1), half-duplex(2), or full-duplex(3). |
| 1.3.6.1.4.1.789.1.22.2.1.9 | netportDuplexOper | 0 | 0 | The duplex mode appears on the port. It can be either undef(0), auto(1), half-duplex(2), or full-duplex(3). |
| 1.3.6.1.4.1.789.1.22.2.1.10 | netportSpeedAdmin | 0 | 0 | The speed of the port set by an adminstrator. It can be either undef(0), auto(1), ten Mb/s(2), hundred Mb/s(3), one Gb/s(4), or … |
| 1.3.6.1.4.1.789.1.22.2.1.11 | netportSpeedOper | 0 | 0 | The speed appears on the port. It can be either undef(0), auto(1), ten Mb/s(2), hundred Mb/s(3), one Gb/s(4), or ten Gb/s(5). |
| 1.3.6.1.4.1.789.1.22.2.1.12 | netportSpeed | 0 | 0 | The speed that appears in the port scaled to megabits/sec. |
| 1.3.6.1.4.1.789.1.22.2.1.13 | netportMac | 0 | 0 | The port's MAC address |
| 1.3.6.1.4.1.789.1.22.2.1.14 | netportUpAdmin | 0 | 0 | Indicates whether the port status is set 'UP' by an adminstrator. |
| 1.3.6.1.4.1.789.1.22.2.1.15 | netportType | 0 | 0 | The type of the port which can be either physical(0), if-group(1), vlan(2) or undef(3). |
| 1.3.6.1.4.1.789.1.22.2.1.16 | netportIfgNode | 0 | 0 | This field shows the if-group node name if the port type is if-group, It show an empty string, otherwise. |
| 1.3.6.1.4.1.789.1.22.2.1.17 | netportIfgPort | 0 | 0 | This field shows the if-group port if the port type is if-group, It show an empty string, otherwise. |
| 1.3.6.1.4.1.789.1.22.2.1.18 | netportIfgDistrFunc | 0 | 0 | If the port type is if-group, this field shows the distribution function of the port. This function is used to pick the forwardi… |
| 1.3.6.1.4.1.789.1.22.2.1.19 | netportIfgMode | 0 | 0 | If the port type is if-group, this field shows the if-group's policy. It can be either multimode(0), multimode-lacp(1), or single… |
| 1.3.6.1.4.1.789.1.22.2.1.20 | netportVlanNode | 0 | 0 | If the port type is vlan, this field shows its vlan node. Otherwise, it shows an empty string. |
| 1.3.6.1.4.1.789.1.22.2.1.21 | netportVlanPort | 0 | 0 | If the port type is vlan, this field shows its vlan port. Otherwise, it shows an empty string. |
| 1.3.6.1.4.1.789.1.22.2.1.22 | netportVlanTag | 0 | 0 | If the port type is vlan, this field shows its vlan tag. Otherwise, it shows an empty string. |
| 1.3.6.1.4.1.789.1.22.2.1.23 | netportFlowcontrolAdmin | 0 | 0 | The flowcontrol of the port set by an adminstrator. It can be either undef(0), none(1), receive(2), send(3), or full(4). |
| 1.3.6.1.4.1.789.1.22.2.1.24 | netportFlowcontrolOper | 0 | 0 | The flowcontrol that appears on the port. It can be either undef(0), none(1), receive(2), send(3), or full(4). |
| 1.3.6.1.4.1.789.1.22.2.1.25 | netportAutorevertDelay | 0 | 0 | If the port is designated as a cluster port, this field shows the delay in seconds before autoreverting a LIF to this port. other… |