Define the highest threshold to receive packets from the HSB.
This parameter is relevant when the receive buffer is full.
When the buffer reached this threshold, all packets will be rejected.
Version 7.0
Parsed from file APPLIC.MIB.txt
Company: None
Module: APPLIC-MIB
Define the highest threshold to receive packets from the HSB.
This parameter is relevant when the receive buffer is full.
When the buffer reached this threshold, all packets will be rejected.
Version 7.0
Parsed from file APPLIC-MIB.mib
Module: APPLIC-MIB
Vendor: Lannet Company
Module: APPLIC-MIB
[Automatically extracted from oidview.com]
lseIntPortRxEmpty0 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Define the highest threshold to receive packets from the HSB. This parameter is relevant when the receive buffer is full. When the buffer reached this threshold, all packets will be rejected. Version 7.0" ::= { lseIntPortEntry 32 }
lseIntPortRxEmpty0 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Define the highest threshold to receive packets from the HSB. This parameter is relevant when the receive buffer is full. When the buffer reached this threshold, all packets will be rejected. Version 7.0" ::= { lseIntPortEntry 32 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.81.19.1.2.1.1.1 | lseIntPortGroupId | 0 | 0 | Id of the group to which the port belongs. |
1.3.6.1.4.1.81.19.1.2.1.1.2 | lseIntPortId | 0 | 0 | Number of LanSwitch port in the board. |
1.3.6.1.4.1.81.19.1.2.1.1.3 | lseIntPortIOMode | 0 | 0 | on(1) activates IO mode in which all packets on the high-speed bus that were not captured by any regular port are captured by the… |
1.3.6.1.4.1.81.19.1.2.1.1.4 | lseIntPortResetSwitchCAM | 0 | 0 | Acting like toggle switch thus always returns off(2) on read. When set to on(1), causes the reset of the LANswitch CAM (addresses… |
1.3.6.1.4.1.81.19.1.2.1.1.5 | lseIntPortVideoPacket | 0 | 0 | When set to on(1), all Tx packets toward the high-speed bus to video type packets. |
1.3.6.1.4.1.81.19.1.2.1.1.6 | lseIntPortPriorityStateMachine | 0 | 0 | Setting the value of this attribute to on(1) activates the priority mechanism. |
1.3.6.1.4.1.81.19.1.2.1.1.7 | lseIntPortActiveBroadcastPriority | 0 | 0 | Setting the value of this attribute to on(1) activates the active broadcast mode in priority mechanism. |
1.3.6.1.4.1.81.19.1.2.1.1.8 | lseIntPortPriorityLevel | 0 | 0 | This attribute defines the priority levels of Tx packets toward the high-speed bus. The highest priority is broadcast(1). |
1.3.6.1.4.1.81.19.1.2.1.1.9 | lseIntPortSuperPriorityEnable | 0 | 0 | When limited space is left in Tx buffer, only the highest priority packets are accepted. This in turn can create a situation in… |
1.3.6.1.4.1.81.19.1.2.1.1.10 | lseIntPortRoutingMode | 0 | 0 | generic(1) - examines all the packets that are not members of any virtual network. net(2) - examines only the packets that have th… |
1.3.6.1.4.1.81.19.1.2.1.1.11 | lseIntPortGlobal | 0 | 0 | Setting the global mode to on(1) sets the port in a network routing mode that examines all packets that are not members of all v… |
1.3.6.1.4.1.81.19.1.2.1.1.12 | lseIntPortLearnIOCAM | 0 | 0 | Setting this parameter to on(1) enables an I/O port to learn incoming MAC addresses received in its port and store them in its CA… |
1.3.6.1.4.1.81.19.1.2.1.1.13 | lseIntPortSecurity | 0 | 0 | Setting the value of this attribute to on(1) activates the security mode. |
1.3.6.1.4.1.81.19.1.2.1.1.14 | lseIntPortIgnoreBusy | 0 | 0 | Setting the value of this attribute to on(1) activates the ignore busy mode. The busy signal toward the high-speed bus is not ac… |
1.3.6.1.4.1.81.19.1.2.1.1.15 | lseIntPortRetryPriorityLevel1 | 0 | 0 | The port increases the priority level of the high-speed bus packets after the defined number (0..31) trials. |
1.3.6.1.4.1.81.19.1.2.1.1.16 | lseIntPortRetryPriorityLevel2 | 0 | 0 | The port increases the priority level of the high-speed bus packets after the defined number (0..255) trials. |
1.3.6.1.4.1.81.19.1.2.1.1.17 | lseIntPortRetryPriorityLevel3 | 0 | 0 | The port increases the priority level of the high-speed bus packets after the defined number (0..255) trials. |
1.3.6.1.4.1.81.19.1.2.1.1.18 | lseIntPortIgnoreProtocolType | 0 | 0 | Any packet regardless of the protocol type is received from the high-speed bus. |
1.3.6.1.4.1.81.19.1.2.1.1.19 | lseIntPortCompanyMAC | 0 | 0 | The attribute defines the first three bytes of the MAC address of the video host server. |
1.3.6.1.4.1.81.19.1.2.1.1.20 | lseIntPortTxSafetyZone | 0 | 0 | Defines the Tx Safety Zone in bits. |
1.3.6.1.4.1.81.19.1.2.1.1.21 | lseIntPortRxSafetyZone | 0 | 0 | Defines the Rx Safety Zone in bits. |
1.3.6.1.4.1.81.19.1.2.1.1.22 | lseIntPortTxBurstLength | 0 | 0 | Defines the TX Burst Length in bits. |
1.3.6.1.4.1.81.19.1.2.1.1.23 | lseIntPortSecurityIntruder | 0 | 0 | The value on(1) of this attribute reflects a security violation occurrence. |
1.3.6.1.4.1.81.19.1.2.1.1.24 | lseIntPortJabber | 0 | 0 | Value on(1) of this attribute reflects that jabber was transmitted to the port by the high-speed bus. |
1.3.6.1.4.1.81.19.1.2.1.1.25 | lseIntPortCAM | 0 | 0 | 112 bytes of MAC addresses. Each contains one byte of the port number and six bytes of the MAC address. This enables to send 16 … |
1.3.6.1.4.1.81.19.1.2.1.1.26 | lseIntPortVideoStateMachine | 0 | 0 | Setting the value of this attribute to on(1) activates the video state machine mode. Received packets are filtered by demand fro… |
1.3.6.1.4.1.81.19.1.2.1.1.27 | lseIntPortTransmitWeight | 0 | 0 | Defines the Transmit Weight of the frames for the current LANswitch port toward the high - speed bus. |
1.3.6.1.4.1.81.19.1.2.1.1.28 | lseIntPortSuperPriority | 0 | 0 | Setting the value of this attribute to on(1) activates the retry priority functions. |
1.3.6.1.4.1.81.19.1.2.1.1.29 | lseIntPortAlignment | 0 | 0 | The number of alignment errors observed on a specified port. |
1.3.6.1.4.1.81.19.1.2.1.1.30 | lseIntPortRxReject | 0 | 0 | The number of Rx buffer full observed on a specified port, from the line toward the High-speed bus. |
1.3.6.1.4.1.81.19.1.2.1.1.31 | lseIntPortTxReject | 0 | 0 | The number of Tx buffer full observed on a specified port, from the line toward the High-speed bus. |
1.3.6.1.4.1.81.19.1.2.1.1.33 | lseIntPortRxEmpty1 | 0 | 0 | Define the middle threshold to receive packets from the HSB. This parameter is relevant when the receive buffer is almost full. W… |
1.3.6.1.4.1.81.19.1.2.1.1.34 | lseIntPortRxEmpty2 | 0 | 0 | Define the lowest threshold to receive packets from the HSB. This parameter is relevant when the receive buffer is almost full. W… |
1.3.6.1.4.1.81.19.1.2.1.1.35 | lseIntPortSuperNetNumber | 0 | 0 | If the internal port supports SuperNet mode, the user have to define the supernet number. Default value is 0. Change of this numb… |
1.3.6.1.4.1.81.19.1.2.1.1.36 | lseIntPortGlobalSuperNet | 0 | 0 | An internal port that is part of all SuperNets is set to Global SuperNet routing. The SuperNet number is 15 in this case. |
1.3.6.1.4.1.81.19.1.2.1.1.37 | lseIntPortMACAddress | 0 | 0 | The MAC address of the port, if it has. If not, an octet string of length 0. |
1.3.6.1.4.1.81.19.1.2.1.1.38 | lseIntPortIgnoreRoutingMode | 0 | 0 | When this parameter is 'ignore', the LANSwitch port monitors all packets without paying attention to the virtual net assignment. |
1.3.6.1.4.1.81.19.1.2.1.1.39 | lseIntPortCAMLastChange | 0 | 0 | This attribute contains the value of sysUpTime at the time any change occured to the content of the specific CAM. |
1.3.6.1.4.1.81.19.1.2.1.1.40 | lseIntPortCopiedPort | 0 | 0 | The port monitored on the LANswitch bus by the LSE-PM module. The value of this item is: 32*(S-1)+P, where S is the slot number i… |
1.3.6.1.4.1.81.19.1.2.1.1.41 | lseIntPortBroadcastBehavior | 0 | 0 | This item relates only to LSE-PM modules. The value of this item defines the method by which the module treats broadcast and mult… |
1.3.6.1.4.1.81.19.1.2.1.1.42 | lseIntPortFilteringMethod | 0 | 0 | This item is relevant only to the LSE-PM module. The value of this item defines the filtering method used to capture packets from… |
1.3.6.1.4.1.81.19.1.2.1.1.43 | lseIntPortSetFilter | 0 | 0 | This item is relevant only to the LSE-PM module. The item is used to add new addresses to the module's filtering table. The strin… |
1.3.6.1.4.1.81.19.1.2.1.1.44 | lseIntPortRemoveFilter | 0 | 0 | This item is relevant only to the LSE-PM module. The item is used to remove existing addresses from the module's filtering table.… |
1.3.6.1.4.1.81.19.1.2.1.1.45 | lseIntPortClearFilter | 0 | 0 | This item is relevant only to the LSE-PM module. The item acts as a toggle switch: when its value is set to clear(2), the content… |
1.3.6.1.4.1.81.19.1.2.1.1.46 | lseIntPortMonitorMissedEvents | 0 | 0 | This item is relevant only to LSE-PM modules. The value of the counter is the number of packets that were not captured by the por… |