This field enables you to assign a PU XID. The
unit uses XID's to establish and negociate PU
application session. If the PU cannot respond to
an XID request from the Host, the unit uses this
assigned XID value.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
This field enables you to assign a PU XID. The
unit uses XID's to establish and negociate PU
application session. If the PU cannot respond to
an XID request from the Host, the unit uses this
assigned XID value.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fclSdlcSecClusterXidStringResponse OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "This field enables you to assign a PU XID. The unit uses XID's to establish and negociate PU application session. If the PU cannot respond to an XID request from the Host, the unit uses this assigned XID value." ::= { fclSdlcSecClusterEntry 12 }
fclSdlcSecClusterXidStringResponse OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "This field enables you to assign a PU XID. The unit uses XID's to establish and negociate PU application session. If the PU cannot respond to an XID request from the Host, the unit uses this assigned XID value." ::= { fclSdlcSecClusterEntry 12 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.866.20.1.20.15.3.2.1.1 | fclSdlcSecClusterLogPortId | 0 | 0 | The value of this object identifies one and only one SDLC access logical port which is in front of primaries Physical Units. The … |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.2 | fclSdlcSecClusterAddress | 0 | 0 | This is the poll address of the controller. You must make sure this address matches the one assignedto the attached controller. R… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.3 | fclSdlcSecClusterStatus | 0 | 0 | Status |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.5 | fclSdlcSecClusterCalledAddr | 0 | 0 | Called X121 address. X121 Address of the corresponding Hpad element. |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.6 | fclSdlcSecClusterFacility | 0 | 0 | The value of this object indicates the X25 call packet facility. The possible values are : none : no facility in the call packet,… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.7 | fclSdlcSecClusterFacThroughputClass | 0 | 0 | Throughput Class |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.10 | fclSdlcSecClusterMinRecallTimer | 0 | 0 | Slow call timer |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.11 | fclSdlcSecClusterRemPvcLogChannel | 0 | 0 | PVC number |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.20 | fclSdlcSecClusterCos | 0 | 0 | COS Class Of Service VBR |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.21 | fclSdlcSecClusterCir | 0 | 0 | CIR Committed information Rate is the maximum number of bits per seconds which an end station can transmit into the network . Thi… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.22 | fclSdlcSecClusterCirmin | 0 | 0 | CIRmin If the end station is informed about the congestion of the network, this is the minimum CIR that the end station can trans… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.23 | fclSdlcSecClusterBc | 0 | 0 | Bc The Committed Burst Size is a measure for the volume of data for which the network will garantee message delivery under normal… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.24 | fclSdlcSecClusterBe | 0 | 0 | Be The Excess Burst Size is the maximum amount of uncommitted data in access of Bc that the network will attemp to deliver during… |