This is the poll address of the controller. You
must make sure this address matches the one
assignedto the attached controller. Range is '01
to FF'
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
This is the poll address of the controller. You
must make sure this address matches the one
assignedto the attached controller. Range is '01
to FF'
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fclSdlcSecClusterAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the poll address of the controller. You must make sure this address matches the one assignedto the attached controller. Range is '01 to FF'" ::= { fclSdlcSecClusterEntry 2 }
fclSdlcSecClusterAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the poll address of the controller. You must make sure this address matches the one assignedto the attached controller. Range is '01 to FF'" ::= { fclSdlcSecClusterEntry 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.866.20.1.20.15.3.2.1.1 | fclSdlcSecClusterLogPortId | 0 | 0 | The value of this object identifies one and only one SDLC access logical port which is in front of primaries Physical Units. The … |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.3 | fclSdlcSecClusterStatus | 0 | 0 | Status |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.5 | fclSdlcSecClusterCalledAddr | 0 | 0 | Called X121 address. X121 Address of the corresponding Hpad element. |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.6 | fclSdlcSecClusterFacility | 0 | 0 | The value of this object indicates the X25 call packet facility. The possible values are : none : no facility in the call packet,… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.7 | fclSdlcSecClusterFacThroughputClass | 0 | 0 | Throughput Class |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.10 | fclSdlcSecClusterMinRecallTimer | 0 | 0 | Slow call timer |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.11 | fclSdlcSecClusterRemPvcLogChannel | 0 | 0 | PVC number |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.12 | fclSdlcSecClusterXidStringResponse | 0 | 0 | This field enables you to assign a PU XID. The unit uses XID's to establish and negociate PU application session. If the PU canno… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.20 | fclSdlcSecClusterCos | 0 | 0 | COS Class Of Service VBR |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.21 | fclSdlcSecClusterCir | 0 | 0 | CIR Committed information Rate is the maximum number of bits per seconds which an end station can transmit into the network . Thi… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.22 | fclSdlcSecClusterCirmin | 0 | 0 | CIRmin If the end station is informed about the congestion of the network, this is the minimum CIR that the end station can trans… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.23 | fclSdlcSecClusterBc | 0 | 0 | Bc The Committed Burst Size is a measure for the volume of data for which the network will garantee message delivery under normal… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.24 | fclSdlcSecClusterBe | 0 | 0 | Be The Excess Burst Size is the maximum amount of uncommitted data in access of Bc that the network will attemp to deliver during… |