The value of this object indicates the X25 call
packet facility. The possible values are :
none : no facility in the call packet,
reverseCharging : Reverse Charging,
cug : Closed User Group,
reverseCharging -cug : Closed User Group,
Reverse Charging.
The default value is 'none'.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
The value of this object indicates the X25 call
packet facility. The possible values are :
none : no facility in the call packet,
reverseCharging : Reverse Charging,
cug : Closed User Group,
reverseCharging -cug : Closed User Group,
Reverse Charging.
The default value is 'none'.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fclSdlcSecClusterFacility OBJECT-TYPE SYNTAX INTEGER { none(1), reverseCharging(2), cug(3), reverseCharging-cug(4), throughputClass(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates the X25 call packet facility. The possible values are : none : no facility in the call packet, reverseCharging : Reverse Charging, cug : Closed User Group, reverseCharging -cug : Closed User Group, Reverse Charging. The default value is 'none'." ::= { fclSdlcSecClusterEntry 6 }
fclSdlcSecClusterFacility OBJECT-TYPE SYNTAX INTEGER { none(1), reverseCharging(2), cug(3), reverseCharging-cug(4), throughputClass(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates the X25 call packet facility. The possible values are : none : no facility in the call packet, reverseCharging : Reverse Charging, cug : Closed User Group, reverseCharging -cug : Closed User Group, Reverse Charging. The default value is 'none'." ::= { fclSdlcSecClusterEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.866.20.1.20.15.3.2.1.1 | fclSdlcSecClusterLogPortId | 0 | 0 | The value of this object identifies one and only one SDLC access logical port which is in front of primaries Physical Units. The … |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.2 | fclSdlcSecClusterAddress | 0 | 0 | This is the poll address of the controller. You must make sure this address matches the one assignedto the attached controller. R… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.3 | fclSdlcSecClusterStatus | 0 | 0 | Status |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.5 | fclSdlcSecClusterCalledAddr | 0 | 0 | Called X121 address. X121 Address of the corresponding Hpad element. |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.7 | fclSdlcSecClusterFacThroughputClass | 0 | 0 | Throughput Class |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.10 | fclSdlcSecClusterMinRecallTimer | 0 | 0 | Slow call timer |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.11 | fclSdlcSecClusterRemPvcLogChannel | 0 | 0 | PVC number |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.12 | fclSdlcSecClusterXidStringResponse | 0 | 0 | This field enables you to assign a PU XID. The unit uses XID's to establish and negociate PU application session. If the PU canno… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.20 | fclSdlcSecClusterCos | 0 | 0 | COS Class Of Service VBR |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.21 | fclSdlcSecClusterCir | 0 | 0 | CIR Committed information Rate is the maximum number of bits per seconds which an end station can transmit into the network . Thi… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.22 | fclSdlcSecClusterCirmin | 0 | 0 | CIRmin If the end station is informed about the congestion of the network, this is the minimum CIR that the end station can trans… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.23 | fclSdlcSecClusterBc | 0 | 0 | Bc The Committed Burst Size is a measure for the volume of data for which the network will garantee message delivery under normal… |
1.3.6.1.4.1.866.20.1.20.15.3.2.1.24 | fclSdlcSecClusterBe | 0 | 0 | Be The Excess Burst Size is the maximum amount of uncommitted data in access of Bc that the network will attemp to deliver during… |