Status and configuration entries for a single CBFTF100
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cbftf100Entry OBJECT-TYPE SYNTAX Cbftf100Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status and configuration entries for a single CBFTF100" INDEX { cbftf100SubDeviceIndex, cbftf100BiaIndex, cbftf100SlotIndex } ::= { cbftf100Table 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.868.2.4.1.2.2.11.1.1 | cbftf100SubDeviceIndex | 0 | 0 | Generally, individual devices in this MIB are distinguished by BiaIndex and SlotIndex. This device differs from many in that it c… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.2 | cbftf100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed. There are no subdevices for this value, so the placeholde… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.3 | cbftf100SlotIndex | 0 | 0 | The slot in which the device is installed. Power Supplies occupy special slots numbered 125 and higher. There are no subdevices f… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.4 | cbftf100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.5 | cbftf100MRevision | 0 | 0 | The marketing revision of this device. There are no subdevices for this value, so the placeholder value 1 is always used for that… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.6 | cbftf100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.7 | cbftf100SerialNumber | 0 | 0 | The serial number of this device. There are no subdevices for this value, so the placeholder value 1 is always used for that inde… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.8 | cbftf100ConfigMode | 0 | 0 | This device may have a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP man… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.9 | cbftf100FirmwareRevision | 0 | 0 | The firmware revision level for this device. There are no subdevices for this value, so the placeholder value 1 is always used fo… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.10 | cbftf100SelfTestFailed | 0 | 0 | cbftf100SelftestFailed |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.11 | cbftf100SpanningTree | 0 | 0 | This variable allows the agent to enable or disable Spanning Tree if it is supported. Not all versions of the hardware support Sp… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.12 | cbftf100MirrorCfg | 0 | 0 | Global enable/disable for mirror port functionality. When this variable is set to disabled, the values of cbftf100MirrorSelTbl, c… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.13 | cbftf100SACMasterCfg | 0 | 0 | Global enable/disable for Source Address Change detection functionality. When this variable is set to disabled the values in cbt… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.14 | cbftf100FormFactor | 0 | 0 | A code corresponding to a physical configuration of the product. This code indicates the number of slots occupied and the number … |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.15 | cbftf100AutoNegotTbl | 0 | 0 | Enables or disables autonegtiation of link speed and duplex for twisted pair ports. Not supported on Fiber ports. There are mul… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.16 | cbftf100FullDuplexTbl | 0 | 0 | In most cases this is a configuration setting that controls the duplex mode; fullDuplex is full duplex and halfDuplex is half dup… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.17 | cbftf100100MbpsTbl | 0 | 0 | In most cases this is a configuration setting that controls the link speed. On twisted pair ports with autonegotiation enabled, … |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.18 | cbftf100Adv10HDXTbl | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 10Mbps, half duplex. This sett… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.19 | cbftf100Adv10FDXTbl | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 10Mbps, full duplex. This sett… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.20 | cbftf100Adv100HDXTbl | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 100Mbps, half duplex. This set… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.21 | cbftf100Adv100FDXTbl | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 100Mbps, full duplex. This set… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.22 | cbftf100CrossTbl | 0 | 0 | Configuration setting for copper TX/RX pair correction. A setting of auto(1) causes the port to automatically correct TX/RX pairs… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.23 | cbftf100PauseCfgTbl | 0 | 0 | The Pause feature allows Ethernet MACs that support it to send data pacing 'Pause' messages to each other. A setting of enabled(1… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.24 | cbftf100PauseStatTbl | 0 | 0 | The Pause feature allows Ethernet MACs that support it to send data pacing 'Pause' messages to each other. A value of paused(1) i… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.25 | cbftf100FarEndFaultTbl | 0 | 0 | When Far End Fault is set to enabled(1), a loss of link on receive will cause the transmitter to shut down, in order to inform th… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.26 | cbftf100ConnectorTbl | 0 | 0 | The style of connectors built into each port of this device. There are multiple subdevices in this table, numbering one entry pe… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.27 | cbftf100SACCfgTbl | 0 | 0 | This configuration setting controls whether changes in source MAC address are reported. When set to enabled(1), a change in MAC a… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.28 | cbftf100SACStatTbl | 0 | 0 | This status value indicates whether or not the source MAC address attached to this port changed in the last polling period. This … |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.29 | cbftf100MirrorSelTbl | 0 | 0 | This configuration setting allows a mirror port to be selected. The selected port will re-transmit copies of all packets transmit… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.30 | cbftf100MirrorInTbl | 0 | 0 | This configuration setting allows a mirror source port to be selected. All packets received on each port with a MirrorInTbl setti… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.31 | cbftf100MirrorOutTbl | 0 | 0 | This configuration setting allows a mirror source port to be selected. All packets transmitted on each port with a MirrorInTbl se… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.32 | cbftf100LinkTbl | 0 | 0 | This table contains the link status of each port in the switch. There are multiple subdevices in this table, numbering one entry… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.33 | cbftf100PortCount | 0 | 0 | A count of the switch ports in this device. i.e. the maximum subdevice index supported by this switch. |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.34 | cbftf100LinkPassThrough | 0 | 0 | If Link Passthrough is enabled on a port, loss of link on the opposite port will be propegated through to this port so that the s… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.35 | cbftf100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |
1.3.6.1.4.1.868.2.4.1.2.2.11.1.36 | cbftf100RedundantPath | 0 | 0 | This variable shows the status of the redundant fiber capability. If the value is enabled(1), this means that the hardware switch… |