Status and configuration entries for a single CBFTF150
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cbftf150Entry OBJECT-TYPE SYNTAX Cbftf150Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status and configuration entries for a single CBFTF150" INDEX { cbftf150SubDeviceIndex, cbftf150BiaIndex, cbftf150SlotIndex } ::= { cbftf150Table 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.868.2.4.1.2.2.22.1.1 | cbftf150SubDeviceIndex | 0 | 0 | Generally, individual devices in this MIB are distinguished by BiaIndex and SlotIndex. This device differs from many in that it c… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.2 | cbftf150BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed. There are no subdevices for this value, so the placeholde… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.3 | cbftf150SlotIndex | 0 | 0 | The slot in which the device is installed. Power Supplies occupy special slots numbered 125 and higher. There are no subdevices f… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.4 | cbftf150Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.5 | cbftf150MRevision | 0 | 0 | The marketing revision of this device. There are no subdevices for this value, so the placeholder value 1 is always used for that… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.6 | cbftf150CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.7 | cbftf150SerialNumber | 0 | 0 | The serial number of this device. There are no subdevices for this value, so the placeholder value 1 is always used for that inde… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.8 | cbftf150ConfigMode | 0 | 0 | This device may have a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP man… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.9 | cbftf150FirmwareRevision | 0 | 0 | The firmware revision level for this device. There are no subdevices for this value, so the placeholder value 1 is always used fo… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.10 | cbftf150FormFactor | 0 | 0 | A code corresponding to a physical configuration of the product. This code indicates the number of slots occupied and the number … |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.11 | cbftf150AutoNegotTbl | 0 | 0 | Enables or disables autonegtiation of link speed and duplex for twisted pair ports. Not supported on Fiber ports. There are mul… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.12 | cbftf150FullDuplexTbl | 0 | 0 | In most cases this is a configuration setting that controls the duplex mode; fullDuplex is full duplex and halfDuplex is half dup… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.13 | cbftf150100MbpsTbl | 0 | 0 | In most cases this is a configuration setting that controls the link speed. On twisted pair ports with autonegotiation enabled, … |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.14 | cbftf150CrossTbl | 0 | 0 | Configuration setting for copper TX/RX pair correction. A setting of auto(1) causes the port to automatically correct TX/RX pairs… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.15 | cbftf150FarEndFaultTbl | 0 | 0 | When Far End Fault is set to enabled(1), a loss of link on receive will cause the transmitter to shut down, in order to inform th… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.16 | cbftf150ConnectorTbl | 0 | 0 | The style of connectors built into each port of this device. There are multiple subdevices in this table, numbering one entry pe… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.17 | cbftf150LinkTbl | 0 | 0 | This table contains the link status of each port in the switch. There are multiple subdevices in this table, numbering one entry… |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.18 | cbftf150PortCount | 0 | 0 | A count of the switch ports in this device. i.e. the maximum subdevice index supported by this switch. |
1.3.6.1.4.1.868.2.4.1.2.2.22.1.19 | cbftf150CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |