Indicates the total number of bytes received for the user and dropped due to rate limitation.
When this counter reaches its maximum value, it wraps around and starts increasing
again from zero.
Parsed from file COLUBRIS-PUBLIC-ACCESS-MIB.my.txt
Company: colubris
Module: COLUBRIS-PUBLIC-ACCESS-MIB
Vendor: Colubris Networks
Module: COLUBRIS-PUBLIC-ACCESS-MIB (COLUBRIS-PUBLIC-ACCESS-MIB.my)
Type: TABULAR
Access: read-only
Syntax: Counter64
Automatically extracted from www.mibdepot.com
publicAccessUserBytesReceivedDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of bytes received for the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and starts increasing again from zero." ::= { publicAccessUserEntry 26 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.8744.5.1.1.3.6.1.1 | publicAccessUserIndex | 0 | 0 | Index of a user in the publicAccessUserTable. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.2 | publicAccessUserAuthenType | 0 | 0 | Indicates the mechanism used to authenticate the user. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.3 | publicAccessUserAuthenMode | 0 | 0 | Specifies how user authentication is performed. It can be done using a local user list defined on the device or AAA server profil… |
1.3.6.1.4.1.8744.5.1.1.3.6.1.4 | publicAccessUserState | 0 | 0 | Indicates the current state of the user. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.5 | publicAccessUserStationIpAddress | 0 | 0 | Indicates the user's IP address. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.6 | publicAccessUserName | 0 | 0 | Indicates the user's name. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.7 | publicAccessUserSessionStartTime | 0 | 0 | Indicates when this user session was started. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.8 | publicAccessUserSessionDuration | 0 | 0 | Indicates how long the user's session has been active. When this counter reaches its maximum value, it wraps around and starts in… |
1.3.6.1.4.1.8744.5.1.1.3.6.1.9 | publicAccessUserIdleTime | 0 | 0 | Indicates for how long the user's session has been idle. When this counter reaches its maximum value, it wraps around and starts … |
1.3.6.1.4.1.8744.5.1.1.3.6.1.10 | publicAccessUserBytesSent | 0 | 0 | Indicates the total number of bytes sent by the user. When this counter reaches its maximum value, it wraps around and starts inc… |
1.3.6.1.4.1.8744.5.1.1.3.6.1.11 | publicAccessUserBytesReceived | 0 | 0 | Indicates the total number of bytes received by the user. When this counter reaches its maximum value, it wraps around and starts… |
1.3.6.1.4.1.8744.5.1.1.3.6.1.12 | publicAccessUserPacketsSent | 0 | 0 | Indicates the total number of IP packets sent by the user. When this counter reaches its maximum value, it wraps around and start… |
1.3.6.1.4.1.8744.5.1.1.3.6.1.13 | publicAccessUserPacketsReceived | 0 | 0 | Indicates the total number of IP packets received by the user. When this counter reaches its maximum value, it wraps around and s… |
1.3.6.1.4.1.8744.5.1.1.3.6.1.14 | publicAccessUserForceDisconnection | 0 | 0 | Setting this attribute to 'adminReset' disconnects the user with a cause of ADMIN_RESET. Reading this variable always return 'idl… |
1.3.6.1.4.1.8744.5.1.1.3.6.1.15 | publicAccessUserStationMacAddress | 0 | 0 | Indicates the user's MAC Address. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.16 | publicAccessUserApMacAddress | 0 | 0 | Indicates the user's Access Point MAC Address when Location- Aware is enabled or the Access Controller MAC Address. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.17 | publicAccessUserGroupName | 0 | 0 | Indicates the user's Access Point Group Name (ONLY when Location-aware is enabled and properly configured). If this information i… |
1.3.6.1.4.1.8744.5.1.1.3.6.1.18 | publicAccessUserSSID | 0 | 0 | Indicates the user's Access Point SSID (ONLY when Location-aware is enabled and properly configured). If this information is not … |
1.3.6.1.4.1.8744.5.1.1.3.6.1.19 | publicAccessUserSecurity | 0 | 0 | Specifies the user's security mode. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.20 | publicAccessUserPHYType | 0 | 0 | Specifies the user's radio type. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.21 | publicAccessUserVLAN | 0 | 0 | Specifies the VLAN currently assigned to the user. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.22 | publicAccessUserApRadioIndex | 0 | 0 | Indicates the radio to which this user is associated. The index 0 is reserved when location aware is not enabled or not properly … |
1.3.6.1.4.1.8744.5.1.1.3.6.1.23 | publicAccessUserConfigIndex | 0 | 0 | Indicates the configuration profile in the publicAccessUsersConfigTable currently associated with this user. When location aware … |
1.3.6.1.4.1.8744.5.1.1.3.6.1.24 | publicAccessUserConnectedInterface | 0 | 0 | Indicates the device's logical public interface to which the user is connected. This will always be a string containing 'br0'. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.25 | publicAccessUserBytesSentDropped | 0 | 0 | Indicates the total number of bytes sent by the user and dropped due to rate limitation. When this counter reaches its maximum v… |
1.3.6.1.4.1.8744.5.1.1.3.6.1.27 | publicAccessUserPacketsSentDropped | 0 | 0 | Indicates the total number of packets sent by the user and dropped due to rate limitation. When this counter reaches its maximum… |
1.3.6.1.4.1.8744.5.1.1.3.6.1.28 | publicAccessUserPacketsReceivedDropped | 0 | 0 | Indicates the total number of packets received for the user and dropped due to rate limitation. When this counter reaches its ma… |
1.3.6.1.4.1.8744.5.1.1.3.6.1.29 | publicAccessUserRateLimitationEnabled | 0 | 0 | Specifies if rate limitation is enabled for the user. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.30 | publicAccessUserMaxTransmitRate | 0 | 0 | Specifies the maximum transmit rate for the user. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.31 | publicAccessUserMaxReceiveRate | 0 | 0 | Specifies the maximum receive rate for the user. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.32 | publicAccessUserBandwidthControlLevel | 0 | 0 | Specifies the user's bandwidth control level. |
1.3.6.1.4.1.8744.5.1.1.3.6.1.33 | publicAccessUserNASPort | 0 | 0 | Specifies the NAS-Port value assigned to the user. |