This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'. When `active' is set, the system
will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.
If the implementator of this MIB has chosen not
to implement `dynamic assignment' of profiles, this
object's MIN-ACCESS is read-only and its value
is always to be `active'.
Parsed from file ZYXEL-VDSLLINE-MIB.mib
Module: ZYXEL-VDSLLINE-MIB
Vendor: ZyXEL Communications Corp.
Module: ZYXEL-VDSLLINE-MIB
[Automatically extracted from oidview.com]
accessSwitchVdslLineConfProfileRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service, (by setting this object to `destroy' or `outOfService') it must be first unreferenced from all associated lines. If the implementator of this MIB has chosen not to implement `dynamic assignment' of profiles, this object's MIN-ACCESS is read-only and its value is always to be `active'." ::= { accessSwitchVdslLineConfProfileEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.1 | accessSwitchVdslLineConfProfileName | 0 | 0 | This object is used by the line configuration table in order to identify a row of this table. When `dynamic' profiles are impleme… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.2 | accessSwitchVdslLineConfMode | 0 | 0 | Specifies the VDSL mode type used on this line. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.3 | accessSwitchVdslVtuoConfRate | 0 | 0 | Transmission rate in bits-per-second specified by this VTU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.4 | accessSwitchVdslVtuoConfTargetSnrMgn | 0 | 0 | accessSwitchVdslVtuoConftargetSnrMgn |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.5 | accessSwitchVdslVtuoConfMaxSnrMgn | 0 | 0 | Configured Maximum acceptable Signal/Noise Margin in 0.01dB. If the Noise Margin is above this the modem should attempt to reduce… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.6 | accessSwitchVdslVtuoConfMinSnrMgn | 0 | 0 | Configured Minimum acceptable Signal/Noise Margin in 0.01dB. If the noise margin falls below this level, the modem should attempt… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.7 | accessSwitchVdslVturConfRate | 0 | 0 | Transmission rate in bits-per-second specified by this VTU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.8 | accessSwitchVdslVturConfTargetSnrMgn | 0 | 0 | accessSwitchVdslVturConftargetSnrMgn |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.9 | accessSwitchVdslVturConfMaxSnrMgn | 0 | 0 | Configured Maximum acceptable Signal/Noise Margin in 0.01dB. If the Noise Margin is above this the modem should attempt to reduce… |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.10 | accessSwitchVdslVturConfMinSnrMgn | 0 | 0 | Configured Minimum acceptable Signal/Noise Margin in 0.01dB. If the noise margin falls below this level, the modem should attempt… |