Vendor: ZyXEL Communications Corp.
Module: ZYXEL-GS4012F-MIB
[Automatically extracted from oidview.com]
sysMgmt OBJECT IDENTIFIER ::= { gs4012f 12 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.890.1.5.8.20.12.1 | sysMgmtConfigSave | 0 | 0 | If setting value is given, the variable write index will be set and running-config will be written to the assigned configuratio… |
1.3.6.1.4.1.890.1.5.8.20.12.2 | sysMgmtBootupConfig | 0 | 0 | The setting value (read index) will be written into non-volatile memory. While rebooting, the variable write index is equal to r… |
1.3.6.1.4.1.890.1.5.8.20.12.3 | sysMgmtReboot | 0 | 0 | Reboot switch from SNMP. 1:Reboot, 0:Nothing |
1.3.6.1.4.1.890.1.5.8.20.12.4 | sysMgmtDefaultConfig | 0 | 0 | Erase running config and reset to default. |
1.3.6.1.4.1.890.1.5.8.20.12.5 | sysMgmtLastActionStatus | 0 | 0 | Display status of last mgmt action. |
1.3.6.1.4.1.890.1.5.8.20.12.6 | sysMgmtSystemStatus | 0 | 0 | This variable indicates the status of the system. The sysMgmtAlarmStatus is a bit map represented a sum, therefore, it can repres… |
1.3.6.1.4.1.890.1.5.8.20.12.7 | sysMgmtCPUUsage | 0 | 0 | Show device CPU load in %, it's the snapshot of CPU load when getting the values. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.890.1.5.8.20.1 | sysInfo | 10 | 10 | None |
1.3.6.1.4.1.890.1.5.8.20.2 | rateLimitSetup | 2 | 7 | None |
1.3.6.1.4.1.890.1.5.8.20.3 | brLimitSetup | 2 | 9 | None |
1.3.6.1.4.1.890.1.5.8.20.4 | portSecuritySetup | 3 | 7 | None |
1.3.6.1.4.1.890.1.5.8.20.5 | vlanTrunkSetup | 1 | 3 | None |
1.3.6.1.4.1.890.1.5.8.20.6 | ctlProtTransSetup | 2 | 4 | None |
1.3.6.1.4.1.890.1.5.8.20.7 | vlanStackSetup | 3 | 7 | None |
1.3.6.1.4.1.890.1.5.8.20.8 | radius8021xSetup | 4 | 11 | None |
1.3.6.1.4.1.890.1.5.8.20.9 | hwMonitorInfo | 3 | 25 | None |
1.3.6.1.4.1.890.1.5.8.20.10 | snmpSetup | 4 | 7 | None |
1.3.6.1.4.1.890.1.5.8.20.11 | dateTimeServerSetup | 9 | 9 | None |
1.3.6.1.4.1.890.1.5.8.20.13 | layer2Setup | 6 | 6 | None |
1.3.6.1.4.1.890.1.5.8.20.14 | ipSetup | 6 | 14 | None |
1.3.6.1.4.1.890.1.5.8.20.15 | filterSetup | 1 | 7 | None |
1.3.6.1.4.1.890.1.5.8.20.16 | mirrorSetup | 3 | 6 | None |
1.3.6.1.4.1.890.1.5.8.20.17 | aggrSetup | 4 | 11 | None |
1.3.6.1.4.1.890.1.5.8.20.18 | accessCtlSetup | 2 | 13 | None |
1.3.6.1.4.1.890.1.5.8.20.19 | queuingMethodSetup | 1 | 5 | None |
1.3.6.1.4.1.890.1.5.8.20.20 | dhcpSetup | 2 | 22 | None |
1.3.6.1.4.1.890.1.5.8.20.21 | staticRouteSetup | 2 | 9 | None |
1.3.6.1.4.1.890.1.5.8.20.22 | arpInfo | 1 | 7 | None |
1.3.6.1.4.1.890.1.5.8.20.23 | portOpModeSetup | 1 | 9 | None |
1.3.6.1.4.1.890.1.5.8.20.24 | portBasedVlanSetup | 1 | 3 | None |
1.3.6.1.4.1.890.1.5.8.20.25 | multicastPortSetup | 1 | 6 | None |
1.3.6.1.4.1.890.1.5.8.20.26 | multicastStatus | 1 | 6 | None |
1.3.6.1.4.1.890.1.5.8.20.27 | igmpFilteringProfileSetup | 2 | 7 | None |
1.3.6.1.4.1.890.1.5.8.20.28 | mvrSetup | 5 | 18 | None |
1.3.6.1.4.1.890.1.5.8.20.29 | layer3Setup | 4 | 4 | None |
1.3.6.1.4.1.890.1.5.8.20.30 | routerIpmcPortSetup | 1 | 3 | None |
1.3.6.1.4.1.890.1.5.8.20.31 | routerVrrpSetup | 3 | 16 | None |
1.3.6.1.4.1.890.1.5.8.20.32 | routerVrrpStatus | 1 | 7 | None |
1.3.6.1.4.1.890.1.5.8.20.33 | routerDomainSetup | 2 | 11 | None |
1.3.6.1.4.1.890.1.5.8.20.34 | diffservSetup | 3 | 8 | None |
1.3.6.1.4.1.890.1.5.8.20.35 | clusterSetup | 4 | 32 | None |
1.3.6.1.4.1.890.1.5.8.20.36 | faultMIB | 1 | 13 | Fault event table definitions |
1.3.6.1.4.1.890.1.5.8.20.37 | faultTrapsMIB | 2 | 7 | Fault event trap definitions |
1.3.6.1.4.1.890.1.5.8.20.38 | ipStatus | 1 | 6 | None |
1.3.6.1.4.1.890.1.5.8.20.39 | routingStatus | 1 | 8 | None |
1.3.6.1.4.1.890.1.5.8.20.40 | ospfExt | 6 | 35 | None |