Value at which the router will shutdown.
Typically the ambient air temperature that
will shut the router down. (e.g. 43)
Value at which the router will shutdown.
Typically the ambient air temperature that
will shut the router down. (e.g. 43)
Parsed from file OLD-CISCO-ENV-MIB.my.txt
Company: None
Module: OLD-CISCO-ENV-MIB
Value at which the router will shutdown.
Typically the ambient air temperature that
will shut the router down. (e.g. 43)
Parsed from file OLD-CISCO-SYS-MIB.mib
Module: OLD-CISCO-SYS-MIB
envTestPt1MarginVal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value at which the router will shutdown. Typically the ambient air temperature that will shut the router down. (e.g. 43)" ::= { lenv 90 }
Vendor: Cisco
Module: OLD-CISCO-ENV-MIB
[Automatically extracted from oidview.com]
envTestPt1MarginVal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value at which the router will shutdown. Typically the ambient air temperature that will shut the router down. (e.g. 43)" ::= { lenv 90 }
envTestPt1MarginVal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value at which the router will shutdown. Typically the ambient air temperature that will shut the router down. (e.g. 43)" ::= { lsystem 90 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.2.1.90.0 | envTestPt1MarginVal | 0 | 0 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.9.2.1.40 | bufferLgFree | 1 | 1 | Contains the number of free large buffers. |
1.3.6.1.4.1.9.2.1.41 | bufferLgMax | 1 | 1 | Contains the maximum number of large buffers. |
1.3.6.1.4.1.9.2.1.42 | bufferLgHit | 1 | 1 | Contains the number of large buffer hits. |
1.3.6.1.4.1.9.2.1.43 | bufferLgMiss | 1 | 1 | Contains the number of large buffer misses. |
1.3.6.1.4.1.9.2.1.44 | bufferLgTrim | 1 | 1 | Contains the number of large buffer trims. |
1.3.6.1.4.1.9.2.1.45 | bufferLgCreate | 1 | 1 | Contains the number of large buffer creates. |
1.3.6.1.4.1.9.2.1.46 | bufferFail | 1 | 1 | Count of the number of buffer allocation failures. |
1.3.6.1.4.1.9.2.1.47 | bufferNoMem | 1 | 1 | Count of the number of buffer create failures due to no free memory. |
1.3.6.1.4.1.9.2.1.48 | netConfigAddr | 1 | 1 | Holds the address of the host that supplied the network-confg file. |
1.3.6.1.4.1.9.2.1.49 | netConfigName | 1 | 1 | Holds the name of the network configuration file. |
1.3.6.1.4.1.9.2.1.50 | netConfigSet | 1 | 1 | Cause the loading of a new network-confg file using TFTP. |
1.3.6.1.4.1.9.2.1.51 | hostConfigAddr | 1 | 1 | Contains the address of the host that provided the host-config file. |
1.3.6.1.4.1.9.2.1.52 | hostConfigName | 1 | 1 | Contains the name of the last configured host-confg file. |
1.3.6.1.4.1.9.2.1.53 | hostConfigSet | 1 | 1 | Cause the loading of a new host-confg file using TFTP. |
1.3.6.1.4.1.9.2.1.54 | writeMem | 1 | 1 | Write configuration into non-volatile memory / erase config memory if 0. |
1.3.6.1.4.1.9.2.1.55 | writeNet | 1 | 1 | Write configuration to host using TFTP. |
1.3.6.1.4.1.9.2.1.56 | busyPer | 1 | 1 | CPU busy percentage in the last 5 second period. Not the last 5 realtime seconds but the last 5 second period in the scheduler. |
1.3.6.1.4.1.9.2.1.57 | avgBusy1 | 1 | 1 | 1 minute exponentially-decayed moving average of the CPU busy percentage. |
1.3.6.1.4.1.9.2.1.58 | avgBusy5 | 1 | 1 | 5 minute exponentially-decayed moving average of the CPU busy percentage. |
1.3.6.1.4.1.9.2.1.59 | idleCount | 1 | 1 | cisco internal variable. not to be used |
1.3.6.1.4.1.9.2.1.60 | idleWired | 1 | 1 | cisco internal variable. not to be used |
1.3.6.1.4.1.9.2.1.61 | ciscoContactInfo | 1 | 1 | cisco's name and address |
1.3.6.1.4.1.9.2.1.62 | bufferHgSize | 1 | 1 | Contains the size of huge buffers. |
1.3.6.1.4.1.9.2.1.63 | bufferHgTotal | 1 | 1 | Contains the total number of huge buffers. |
1.3.6.1.4.1.9.2.1.64 | bufferHgFree | 1 | 1 | Contains the number of free huge buffers. |
1.3.6.1.4.1.9.2.1.65 | bufferHgMax | 1 | 1 | Contains the maximum number of huge buffers. |
1.3.6.1.4.1.9.2.1.66 | bufferHgHit | 1 | 1 | Contains the number of huge buffer hits. |
1.3.6.1.4.1.9.2.1.67 | bufferHgMiss | 1 | 1 | Contains the number of huge buffer misses. |
1.3.6.1.4.1.9.2.1.68 | bufferHgTrim | 1 | 1 | Contains the number of huge buffer trims. |
1.3.6.1.4.1.9.2.1.69 | bufferHgCreate | 1 | 1 | Contains the number of huge buffer creates. |
1.3.6.1.4.1.9.2.1.70 | netConfigProto | 1 | 1 | Holds the protocol that supplied the network-confg file. |
1.3.6.1.4.1.9.2.1.71 | hostConfigProto | 1 | 1 | Holds the protocol that supplied the host- confg file. |
1.3.6.1.4.1.9.2.1.72 | sysConfigAddr | 1 | 1 | Holds the address of the host that supplied the system boot image. |
1.3.6.1.4.1.9.2.1.73 | sysConfigName | 1 | 1 | Holds the name of the system boot image. |
1.3.6.1.4.1.9.2.1.74 | sysConfigProto | 1 | 1 | Holds the protocol that supplied the system boot image. |
1.3.6.1.4.1.9.2.1.75 | sysClearARP | 1 | 1 | Perform a clearing of the entire ARP cache and invalidation of route caches. |
1.3.6.1.4.1.9.2.1.76 | sysClearInt | 1 | 1 | Clear interface given IfIndex as value. |
1.3.6.1.4.1.9.2.1.77 | envPresent | 1 | 1 | Is there an environmental monitor card in this box?, 0 - No, 1-AGS card present, wrong firmware, 2-AGS CARD present, firmware ok,… |
1.3.6.1.4.1.9.2.1.78 | envTestPt1Descr | 1 | 1 | Description of the test point 1. Typically ambient air or the temperature of air entering the router |
1.3.6.1.4.1.9.2.1.79 | envTestPt1Measure | 1 | 1 | Current value of test point 1. Typically a temperature in centigrade. |
1.3.6.1.4.1.9.2.1.80 | envTestPt2Descr | 1 | 1 | Description of the test point 2. Typically airflow or the temperature of air leaving the router |
1.3.6.1.4.1.9.2.1.81 | envTestPt2Measure | 1 | 1 | Current value of test point 2. Typically a temperature in centigrade. |
1.3.6.1.4.1.9.2.1.82 | envTestPt3Descr | 1 | 1 | Description of the test point 3. Typically +5 volt |
1.3.6.1.4.1.9.2.1.83 | envTestPt3Measure | 1 | 1 | Current value of test point 3. Typically the value in millivolts of the +5v supply |
1.3.6.1.4.1.9.2.1.84 | envTestPt4Descr | 1 | 1 | Description of the test point 4. Typically +12 volt |
1.3.6.1.4.1.9.2.1.85 | envTestPt4Measure | 1 | 1 | Current value of test point 4. Typically the value in millivolts of the +12v supply |
1.3.6.1.4.1.9.2.1.86 | envTestPt5Descr | 1 | 1 | Description of the test point 5. Typically -12 volt |
1.3.6.1.4.1.9.2.1.87 | envTestPt5Measure | 1 | 1 | Current value of test point 5. Typically the value in millivolts of the -12v supply |
1.3.6.1.4.1.9.2.1.88 | envTestPt6Descr | 1 | 1 | Description of the test point 6. Typically -5 volt |
1.3.6.1.4.1.9.2.1.89 | envTestPt6Measure | 1 | 1 | Current value of test point 6. Typically the value in millivolts of the -5v supply |
1.3.6.1.4.1.9.2.1.91 | envTestPt2MarginVal | 1 | 1 | Value at which the router will shutdown. Typically the airflow air temperature that will shut the router down. (e.g. 58) |
1.3.6.1.4.1.9.2.1.92 | envTestPt3MarginPercent | 1 | 1 | +/- Percentage that will shut the router down, (e.g. 10%) typically +5 volt |
1.3.6.1.4.1.9.2.1.93 | envTestPt4MarginPercent | 1 | 1 | +/- Percentage that will shut the router down, (e.g. 15%) typically +12 volt |
1.3.6.1.4.1.9.2.1.94 | envTestPt5MarginPercent | 1 | 1 | +/- Percentage that will shut the router down, (e.g. 15%) typically -12 volt |
1.3.6.1.4.1.9.2.1.95 | envTestPt6MarginPercent | 1 | 1 | +/- Percentage that will shut the router down, (e.g. 10%) typically -5 volt |
1.3.6.1.4.1.9.2.1.96 | envTestPt1last | 1 | 1 | Value of TestPt1 when last shutdown occurred. |
1.3.6.1.4.1.9.2.1.97 | envTestPt2last | 1 | 1 | Value of TestPt2 when last shutdown occurred. |
1.3.6.1.4.1.9.2.1.98 | envTestPt3last | 1 | 1 | Value of TestPt3 when last shutdown occurred. |
1.3.6.1.4.1.9.2.1.99 | envTestPt4last | 1 | 1 | Value of TestPt4 when last shutdown occurred. |
1.3.6.1.4.1.9.2.1.100 | envTestPt5last | 1 | 1 | Value of TestPt5 when last shutdown occurred. |
1.3.6.1.4.1.9.2.1.101 | envTestPt6last | 1 | 1 | Value of TestPt6 when last shutdown occurred. |
1.3.6.1.4.1.9.2.1.102 | envTestPt1warn | 1 | 1 | Is this test point at a warning level? |
1.3.6.1.4.1.9.2.1.103 | envTestPt2warn | 1 | 1 | Is this test point at a warning level? |
1.3.6.1.4.1.9.2.1.104 | envTestPt3warn | 1 | 1 | Is this test point at a warning level? |
1.3.6.1.4.1.9.2.1.105 | envTestPt4warn | 1 | 1 | Is this test point at a warning level? |
1.3.6.1.4.1.9.2.1.106 | envTestPt5warn | 1 | 1 | Is this test point at a warning level? |
1.3.6.1.4.1.9.2.1.107 | envTestPt6warn | 1 | 1 | Is this test point at a warning level? |
1.3.6.1.4.1.9.2.1.108 | envFirmVersion | 1 | 1 | Description of Environmental Card firmware |
1.3.6.1.4.1.9.2.1.109 | envTechnicianID | 1 | 1 | Technician ID |
1.3.6.1.4.1.9.2.1.110 | envType | 1 | 1 | The type of environmental card |
1.3.6.1.4.1.9.2.1.111 | envBurnDate | 1 | 1 | The calibration / burn in date |
1.3.6.1.4.1.9.2.1.112 | envSerialNumber | 1 | 1 | Serial Number of environmental monitor card |
... |