This object specifies the maximum amount of time to delay
before generating the cItpRouteStateChange notification.
The delay is introduced to allow multiple route state
changes to be bundled into a single notification.
If the value of this object is equal to 0, the device will
generate cItpRouteStateChange notification as each route
changes states.
If the value of this object is greater than 0, the device
will not generate notifications as routes change state.
As routes changes state they are accumulated until the time
specified in cItpRtChangeNotifDelayTime has elapsed or
enough state changes have been accumulated to fill up the
cItprtNotifInfoStateChanges object.
This object is ignored by the agent when the
cItpRtStateChangeNotifEnabled object is set to the 'false'
value.
Parsed from file CISCO-ITP-RT-MIB.mib
Module: CISCO-ITP-RT-MIB
This object specifies the maximum amount of time to delay
before generating the cItpRouteStateChange notification.
The delay is introduced to allow multiple route state
changes to be bundled into a single notification.
If the value of this object is equal to 0, the device will
generate cItpRouteStateChange notification as each route
changes states.
If the value of this object is greater than 0, the device
will not generate notifications as routes change state.
As routes changes state they are accumulated until the time
specified in cItpRtChangeNotifDelayTime has elapsed or
enough state changes have been accumulated to fill up the
cItprtNotifInfoStateChanges object.
This object is ignored by the agent when the
cItpRtStateChangeNotifEnabled object is set to the 'false'
value.
This object specifies the maximum amount of time to delay
before generating the cItpRouteStateChange notification.
The delay is introduced to allow multiple route state
changes to be bundled into a single notification.
If the value of this object is equal to 0, the device will
generate cItpRouteStateChange notification as each route
changes states.
If the value of this object is greater than 0, the device
will not generate notifications as routes change state.
As routes changes state they are accumulated until the time
specified in cItpRtChangeNotifDelayTime has elapsed or
enough state changes have been accumulated to fill up the
cItprtNotifInfoStateChanges object.
This object is ignored by the agent when the
cItpRtStateChangeNotifEnabled object is set to the 'false'
value.
Parsed from file CISCO-ITP-RT-MIB.my.txt
Company: None
Module: CISCO-ITP-RT-MIB
This object specifies the maximum amount of time to delay
before generating the cItpRouteStateChange notification.
The delay is introduced to allow multiple route state
changes to be bundled into a single notification.
If the value of this object is equal to 0, the device will
generate cItpRouteStateChange notification as each route
changes states.
If the value of this object is greater than 0, the device
will not generate notifications as routes change state.
As routes changes state they are accumulated until the time
specified in cItpRtChangeNotifDelayTime has elapsed or
enough state changes have been accumulated to fill up the
cItprtNotifInfoStateChanges object.
This object is ignored by the agent when the
cItpRtStateChangeNotifEnabled object is set to the 'false'
value.
cItpRtChangeNotifDelayTime OBJECT-TYPE SYNTAX Unsigned32 (0..60) UNITS "seconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the maximum amount of time to delay before generating the cItpRouteStateChange notification. The delay is introduced to allow multiple route state changes to be bundled into a single notification. If the value of this object is equal to 0, the device will generate cItpRouteStateChange notification as each route changes states. If the value of this object is greater than 0, the device will not generate notifications as routes change state. As routes changes state they are accumulated until the time specified in cItpRtChangeNotifDelayTime has elapsed or enough state changes have been accumulated to fill up the cItprtNotifInfoStateChanges object. This object is ignored by the agent when the cItpRtStateChangeNotifEnabled object is set to the 'false' value." DEFVAL { 10 } ::= { cItpRtScalars 6 }
cItpRtChangeNotifDelayTime OBJECT-TYPE SYNTAX Gauge(0..60) ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the maximum amount of time to delay before generating the cItpRouteStateChange notification. The delay is introduced to allow multiple route state changes to be bundled into a single notification. If the value of this object is equal to 0, the device will generate cItpRouteStateChange notification as each route changes states. If the value of this object is greater than 0, the device will not generate notifications as routes change state. As routes changes state they are accumulated until the time specified in cItpRtChangeNotifDelayTime has elapsed or enough state changes have been accumulated to fill up the cItprtNotifInfoStateChanges object. This object is ignored by the agent when the cItpRtStateChangeNotifEnabled object is set to the 'false' value." DEFVAL { 10 } ::= { cItpRtScalars 6 }
Vendor: Cisco
Module: CISCO-ITP-RT-MIB
[Automatically extracted from oidview.com]
cItpRtChangeNotifDelayTime OBJECT-TYPE SYNTAX Gauge(0..60) ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the maximum amount of time to delay before generating the cItpRouteStateChange notification. The delay is introduced to allow multiple route state changes to be bundled into a single notification. If the value of this object is equal to 0, the device will generate cItpRouteStateChange notification as each route changes states. If the value of this object is greater than 0, the device will not generate notifications as routes change state. As routes changes state they are accumulated until the time specified in cItpRtChangeNotifDelayTime has elapsed or enough state changes have been accumulated to fill up the cItprtNotifInfoStateChanges object. This object is ignored by the agent when the cItpRtStateChangeNotifEnabled object is set to the 'false' value." DEFVAL { 10 } ::= { cItpRtScalars 6 }
cItpRtChangeNotifDelayTime OBJECT-TYPE SYNTAX Unsigned32 (0..60) UNITS "seconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the maximum amount of time to delay before generating the cItpRouteStateChange notification. The delay is introduced to allow multiple route state changes to be bundled into a single notification. If the value of this object is equal to 0, the device will generate cItpRouteStateChange notification as each route changes states. If the value of this object is greater than 0, the device will not generate notifications as routes change state. As routes changes state they are accumulated until the time specified in cItpRtChangeNotifDelayTime has elapsed or enough state changes have been accumulated to fill up the cItprtNotifInfoStateChanges object. This object is ignored by the agent when the cItpRtStateChangeNotifEnabled object is set to the 'false' value." DEFVAL { 10 } ::= { cItpRtScalars 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.228.1.1.6.0 | cItpRtChangeNotifDelayTime | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.228.1.1.1 | cItpRtConfigLastChanged | 1 | 1 | The value of sysUpTime at the time of the last creation or deletion of an entry in the cItpRouteTable. If the local network manag… |
1.3.6.1.4.1.9.9.228.1.1.2 | cItpRtConfigLoad | 1 | 1 | The value of sysUpTime at the time of the last load of the route table using file format. |
1.3.6.1.4.1.9.9.228.1.1.3 | cItpRtConfigLoadStatus | 1 | 1 | The status of the current load or status from the prior load operation. This object will have a value of loadInProgress while th… |
1.3.6.1.4.1.9.9.228.1.1.4 | cItpRtStateChangeCount | 1 | 1 | A count of the number of routes that have changed states. This value is incremented whenever the destination state of a route cha… |
1.3.6.1.4.1.9.9.228.1.1.5 | cItpRtStateChangeNotifEnabled | 1 | 1 | A control to enable or disable cItpRouteStateChange notifications as follows: 'true' Indicates that the cItpRouteStateChange noti… |
1.3.6.1.4.1.9.9.228.1.1.7 | cItpRtMaxDynamicRoutes | 1 | 1 | The maximum number of dynamic SS7 routes. This object is used to limit the size of the route table by preventing unbounded growth… |
1.3.6.1.4.1.9.9.228.1.1.8 | cItpRtChangeNotifWindowTime | 1 | 1 | This object specifies the time interval used to monitor the rate of route state changes notifications. This object in combinatio… |
1.3.6.1.4.1.9.9.228.1.1.9 | cItpRtChangeNotifMaxPerWindow | 1 | 1 | This object specifies the maximum number of route state changes that can occur in the time interval specified in the cItpRtChange… |